Jake Lo
-
Posts
14365 -
Joined
-
Last visited
-
Days Won
868
Content Type
Profiles
Articles, News and Tips
Forums
Everything posted by Jake Lo
-
Try this Config, make a few modsconfig.plist.zip
-
Remove DSDT.aml from /E/C/A/Patched folder and try again
-
attach clover folder of your current config. With the changes, I need to see what you have so far.
-
Try this Config file config.plist.zip
-
Removed AVFrameBuffer.kext and AVVideoCard.kext from /S/L/E Repair permissions and rebuild cache -
post debug file
-
Use Clover Configurator to accomplish this
-
Check to see if there's a newer BIOS available and update to that. After successfully upgrade, set it to LOAD Defaults. Apply Reboot back to the BIOS Set it according to 7490. It's the same for all the Dell's. Mainly just set it to UEFI enabled Legacy Options ROMs disabled (might be default) AHCI enabled Secure Boot disabled CPU XD enabled Wake on LAN / WLAN / WWAN /USB Disabled
-
Update to latest CodecCommander Repair permissions and rebuild cache Go ahead with the compile if you know what patches are needed, otherwise use what's working.
-
can you boot with verbose + debug 0x100 mode to determine where it's stuck?
-
No error is good, but what patches did you add? Here, stripped out the layout-id from the DSDT. Change the layout-id in Config to 18 Give it a try alc292.zip
-
Try this Install this version of Clover. Select these items: Clover for UEFI booting only Install Clover in the ESP UEFI Drivers\Recommended drivers AudioDxe DataHubDxe FSInject ApfsDriverLoader AptioMemoryFix HFSPlus Additonal drivers PartitionDxe Themes (optional) Install Clover Preference Pane (optional. For installed drive only, not available on installer) Replace attached contents into /EFI/Clover Try installation again Latitude 5591.zip
-
M4800 has ALC292. Remove AppleHDA_ALC292.kext from /L/E Remove VoodooHDA.kext and AppleHDADisabler.kext Disable the (4) AppleHDA patches in the Config file Change layout-id to 18 or 12 in Config file and also the DSDT.aml since you have it hardcoded it in, make it matches on both or just change it in DSDT and leave it off in the Config file Repair permissions and rebuild cache
-
[SOLVED] Dell Vostro 5568: help required to install macOS
Jake Lo replied to matthewhack673's topic in The Archive
No, it's just cosmetics. -
try booting with boot arg -igfxvesa Check the BIOS, make sure you have UEFI /AHCI enabled. Disable Legacy Option ROMs/ Secure Boot
-
At Clover gui, press O to get to Options. Go down to Graphics Injector and select it Select both FakeID and platform-id and change them to 0x12345678 Enable verbose and debug 0x100 mode Continue booting
-
Use Hackintool.app https://www.insanelymac.com/forum/topic/335018-hackintool-v280/
-
Just leave out the DSDT.aml and try again. Boot with verbose + debug 0x100 mode by pressing the spacebar and select them
-
Did you remove the kext I mentioned?
-
[SOLVED] Dell Vostro 5568: help required to install macOS
Jake Lo replied to matthewhack673's topic in The Archive
Your version of Clover is old. Download from here and install with the following settings Clover for UEFI booting only Install Clover in the ESP UEFI Drivers\Recommended drivers AudioDxe DataHubDxe FSInject ApfsDriverLoader AptioMemoryFix HFSPlus Additonal drivers PartitionDxe Themes (optional) Install Clover Preference Pane (optional. For installed drive only, not available on installer) Now replace attached files into /EFI/Clover Vostro5568_HD620_Only.zip -
Remove USB_Injector.kext from /E/C/k/Other Already have USBPort.kext The audio issue is known for this codecID. Perhaps need emuVariableUEFI.efi
-
You need to select the new Option " install MacOS from ..." not boot MacOS from ..." to complete the installation. After complete installation, the "install MacOS from... " option will be gone.
-
Try this one, added patch for Brightness Fn + Arrow keys DSDT.aml.zip
-
Here, replace into /EFI/Clover/ACPI/Patched DSDT.aml.zip
