Jake Lo

Do you get full graphics acceleration using the USB installer? post the clover folder from the USB installer Holy Moly, you've been at this since January?

Sorry, try updating these 2 kexts in /EFI/Clover/kexts/Other Lilu.kext Whatevergreen.kext

The previous screenshot means it's not detecting your drive. Make sure AHCI is enabled in BIOS. When installing Clover, use the following config Install for UEFI booting only Install Clover in the ESP Drivers64UEFI\DataHubDxe-64 Drivers64UEFI\FSInject-64 Drivers64UEFI\SMCHelper-64 Drivers64UEFI\ApfsDriverLoader-64 Drivers64UEFI\AptioMemoryFix-64 Drivers64UEFI\PartitionDxe-64 Install Clover Preference Pane Add to Drivers64UEFI\HFSPlus.efi (Not included in Clover installer) Post the clover folder is issue is still not resolved after following the above

try this one DSDT.aml.zip

Post full system specs and debug file

Replace contents into /EFI/Clover and try again Make sure you have BIOS set to Load Defaults, Apply it and then go back to set it to UEFI AHCI Legacy Option ROMs Enabled Secure Boot Disabled

Ok, give this a try, remove the SSDT-PNLF.aml DSDT.aml.zip

@rakhadiputra What machine did you mod it for?

got it. Try this Config config.plist.zip Nevermind, just realized you're running with Nvidia GeForce GTX 460M. The patches are for Intel GPU only. Is there anyway to disable the Nvidia and use the HD3000?

please post new debug file You said Fn+F5 and Fn+F6 was working, but the brightness display won't change, now you said it's not working anymore with the new files? If slider not showing in Preference then brightness is not working, so how is that back to normal? Did you try adding SSDT-PNLF.aml to sortedOrder in the Config file?

The files I linked is not BIOS version dependent. First set your BIOS to Load Defaults. Apply it. Now go back and set the BIOS to UEFI/AHCI/Legacy Option ROMs enable, Secure boot Disabled Remove the OSX Boot Options and create a new one if necessary. Upgrade to latest Clover, v4910 at the moment. Use the following settings when installing Clover Install for UEFI booting only Install Clover in the ESP Drivers64UEFI\DataHubDxe-64 Drivers64UEFI\FSInject-64 Drivers64UEFI\SMCHelper-64 Drivers64UEFI\ApfsDriverLoader-64 Drivers64UEFI\AptioMemoryFix-64 Drivers64UEFI\PartitionDxe-64 Add to Drivers64UEFI\HFSPlus.efi (Not included in Clover installer)

Try this, added HDMI patch config.HDMI.zip

Usually touchpad preference won't load if your Battery Status is not working, please confirm. For now try this. Add the *.aml files to Patched folder and replace the Config file, I made a little modification. If audio still not work, you might want to try moving CodecCommander to /L/E Repair permissions and rebuild cache touchpad.zip

Add DSDT/SSDT to Patched folder replace the old DSDT. Back it up first. Add the kext to /EFI/Clover/kexts/Other Brightness Fix.zip

Try updating your usb installer with latest Clover and kexts, then boot the USB installer and then select the internal drive to boot

Only difference I could tell is that you added EmuVariableUefi-64.efi which should not be use with AptioMemoryFix-64.efi but with older OSXAptioFixDrv.efi

also remove the Themes folder

What changes did you add?

Share your full working files in your 1st post for others that might have the same system.

replace VoodooPS2Controller with this

post debug file

check out reHabman's GitHub for the kext. Maybe find more info there

Did you remove the 2 kexts from /L/E?

Files are a bit outdated. Your Config has smBIOS MBP8,1 while the USB_Injector hardcoded with MBP8,2. I replace the injector with one from Hervé files Try replace this into /EFI/Clover E6320_Mojave.zip

Try upgrading Clover to latest. You're on v4586, latest version is v4910 last I checked. If that still not working, try going to Clover Options and change ig-platform-id to 0x12345678 Once booted, repair permissions and rebuild cache