Jake Lo

Ok, looks like Alps IC2 touchpad is not fully supported, just emulated as a regular mouse with simple 2 fingers scrolling and some other simple features. Will have to wait for the developer to update his kexts if ever...could be awhile, he's a busy guy.

That means system had crashed. Pressing enter should get it booting but does that occur on every boot /restart? In /EFI/Clover/drivers64UEFI, remove the following APFS.efi EmuVariableUefi-64.efi I see you have BrcmPatchRAM2 & BrcmFirmwareRepo in /L/E, so remove BrcmFirmwareData & BrcmPatchRAM2 from Clover/kexts/Other Should not need BrcmBluetoothInjector either. Is the Battery status working? Do the above, repair permissions and rebuild cache. Reboot a couple of times, check is Touchpad preference is working. Does the touchpad work at all?

@micheajp why do you use a Desktop SMBIOS over a laptop?

It's in the guide How to install: 1) Remove any patched kexts (or) Bluetooth enablers installed for Bluetooth and use Apple vanilla Bluetooth kext. 2) Install my kext (BTFirmwareUploader.kext) using your favorite kext installers to /System/Library/Extensions. (Don't install my kext through E/E (or) clover injection).

Rebuild cache and reboot a couple of times before trackpad works. Trackpad preference won't work unless Battery Status is working...check that first. Post debug file if you need further troubleshooting Not sure what you're referring to in sign with 5 languages, post screenshot for better understanding.

The error basically meant you don't have enough video memory required for Broadwell and newer system. There are patches that bypass the requirement check, so some reason it's not working. I added additional patches to the working Config you're using for the touchpad and audio. See if this works config.plist.zip

DW1550 or something from the link I provided above. Stay away from Atheros, not longer supported in Mojave if you plan to upgrade later. Yes, dual boot is possible. Check out the Dual Boot instruction from this guide

AR9485 has little to no support and are hits and misses, more misses. See here. It's not a recommended device

No need, just boot with the USB installer and select the installed drive to boot. Replace the Config with this one to /EFI/Clover config.plist.zip

At Clover gui, press O to get to Options. Go down to Graphics Injector and select it Select FakeID and change it to 0x12345678 Continue with installation Once installed you can boot without that temporary change now that the Skylake FB has been cached.

It's not my kext, it's Rehabman's VoodooPS2Controller for Synaptics touchpad. Check his GitHub for full functionality.

Artheros are no longer supported in Mojave, better to stay away from them. Go with Broadcom chipset. For the Debug to work, you need to follow the instruction properly. Reboot to Clover, press F2 and F4 Or Fn+F2 and Fn+F4 Then run the debug again.

Install Karabiner-Elements app and re-assign the Fn keys See here for example

Can't expect stuff to work if you're using files for another model. Try this, replace contents into /EFI/Clover 7480_HD520.zip

You need to provide full computer specs, can't help you without at least those info.

Just use Hervé patch or add Whatevergreen.kext to /L/E What combo key are you using to control the brightness? Does it do the same from preference pane

The HDMI is hardwired to the Discrete card, in your case Nvidia NVS5200m.

Try this, replace contents into /EFI/Clover Brightness.zip

Post debug file

See here for list of supported. /unsupported cards. Check if your card is in that list. What most would want working are: Sleep / Wake HDMI / DP video Audio Touchpad multi-touch Battery Status Brightness Control Wireless / Bluetooth From your screenshot, you have full graphics support and battery status seems to be working so you could check those off. Open a new thread for issues in the Help & Support section now that you got the installer resolved, it's off topic.

Your installer is corrupted. Rebuild it using well known method https://support.apple.com/en-us/HT201372

Yes, as I said Intel is not supported...Intel(R) Dual Band Wireless-AC 7265

No, you need to physically replace the card in your system or use an USB wireless device. When installing Clover, make sure to select the local drive. Once install the EFI partition will be mounted. Update the files with the working Clover folder

Probably you have an Intel Wireless / bluetooth Combo card which is not compatible. You'll need to replace it with DW1560 which is my recommended card for this model. Follow the post install steps here Install Clover to the drive and copy the Clover folder from your USB installer which has my files or just replace the files I linked

Replace the files I had linked here into /EFI/Clover Remove these from /EFI/Clover/drivers64UEFI VBoxHfs-64.efi OsxAptioFixDrv-64.efi Make sure you set BIOS to Load Default. Apply. Then change to UEFI / AHCI / Secure Boot Disabled / Legacy Option ROMs enabled