Hervé

It'll never work properly. We can all get ML or Mavericks installed on unsupported systems like D430 or D620. Without full graphics support, there is no point, you need to accept that fact. You're just wasting your time in my opinion.

The DSDT is specific to the laptop, it is not part of Mavericks GM. As such, whatever DSDT file you used before would still be used with 10.9 GM. However, something in the DSDT may have stopped working with GM, so a different DSDT patch may be required.

Forget it, GMA3150 is totally unsupported by Mac OS X. There's just no point trying to Hack that system, it won't be usable.

Hi, you can start by reading the various threads about the M4400 in this particular section of the forum. Then read the various pages of the Web site, especially the EDP ones which provide the installation procedure we support here (i.e. with myHack installer).

You can't use EDP if the system is not in the list of systems covered by EDP. These are listed in the compatibility chart of the EDP section of the web site. myHack is just an installer and will not resolve these issues. What are the specs of that HP mini? Until you list the hardware used on that system, we can't really help you.

The info in "About this Mac" is just cosmetic.

Do you still have the USB installer you used initially to install Mac OS? If you do, boot off that USB installer, interrupt the Chameleon bootloader when you see the delay bar and select your HDD Mac partition.

So try via your USB installer as suggested before...

You did change the active partition with diskpart tool, didn't you? If you set the Win partition (#2) active, set back Mac partition (#3) active. If that does not work, boot off your USB installer and then select your HDD Mac partition. Once in Mac OS X, reinstall Chameleon with Cham Wizard.

Cham Wizard -> Install tab -> Select Cham version, select target partition, click Install. If it tells you it can't find the server and your Internet is up, then maybe the server at the other end is down. Wait and try later of copy whatever boot file you have on your USB installer to your HDD.

DW350/360 are natively supported, the patch is just to be able to turn BT on or off. Other than that, BT services remain operational, true.

If your wireless is not working or not connected, use your LAN port. But basically, you need network connectivity! The OSXL bootpack provides support for the LAN port from the onset.

In that case, once booted in Mavericks, just use Chameleon Wizard to update Chameleon version on your Mavericks HDD/boot partition.

Was your initial DSDT (the "defective" one) from the OSXL bootpack?

What was the problem? What did you do to fix it?

I believe I already told you: Snow Leopard!

The IOBluetoothFamily kext has been completely changed, so the kext from 10.8.4 is of no (re)use... Read my post about it. Look up your BT module in the USB part of the System Report and report that back. In all likelihood, it'll be a DW350 or DW360 and I can easily provide you with the patched kext to place in /E/E after update to 10.8.5. You'll find the PCI ids of the above modules in the 'Bluetooth for D Series' thread in R&D->Wifi/bluetooth section.

I do not believe that Celeron CPU would be supported by anything except possibly Snow Leopard. Or maybe with a custom kernel, like for Atom CPUs. From Lion, Mac OS X requires a Core2Duo minimum, and Celeron are below that minimum spec, as are dual core Pentium as far as I know. What you could do though is try out retail SL 10.6.0/10.6.3/10.6.8 with Nawcom's ModCD and see where that leads you.

Sounds like you would need to patch your graphics kexts for Intel HD4k then.

Incorrect keys in Fake SMC kext?

Thanks for your patience Sergio. It paid off for your system and we're now in a position to integrate this M4400 model (Core2Duo, nVidia FX 770M) to EDP. You're running with the DSDT of an E6400 (that I just modified for cosmetic benefits), so it would be much better to extract DSDT + SSDT tabled from Windows using Dinesh's documented process so that we have the best possible tables at our disposal. https://osxlatitude.com/index.php?/topic/1945-dsdtssdt-patching/ We just need to confirm operational status of webcam and card reader.

Recent VoodooHDA 2.8.1 -> 2.8.4 should all be Ok, bearing in mind that a VoodooHDA kext must be accompanied by the AppleHDADisabler to support audio properly.

Open up a Terminal window and post us the result of the lspci -nn command. You might need to patch the nVidia kext to support your particular card. I see no reason why it would not be supported, being based on the 9600M chip: http://www.notebookcheck.net/NVIDIA-Quadro-FX-770M.11707.0.html Are you booting with option GraphicsEnabler=Yes ?

You really should use the Search facility of the forum and read about Hackintoshing and installing ML throughout the forum and web site. You'd have found out that you can ignore this "installation failed" message and let your system reboot straight into ML! There's no need to reinstall!

@mcr: the nVidia 7300 will not be supported by ML, it's one of those chips dropped by Apple from ML). Replace it by a supported video board and you'll enjoy full QE/CI. The 745SFF is quite similar to the Vostro200 and that runs SL/L/ML/Mav without any issue as long as you have the right graphics card.