Bronxteck

your welcome....

Merry Christmas

use chameleon wizard it's included in edp then save your changes

well the snow image is 10.6.0 and chameleon has changed since... back in the day it used com.apple.boot.plist edp uses the newer convention that is org.chameleon.Boot.plist.... edp 1.9.2 uses the org. naming check your extra folder. so if you used edp from 1.9.2 it uses the org version of the plist com and org are the same thing but they just chose to change the naming of it.

oh that... thats a sleep enabler issue.... you either have to update osx or replace sleep enabler or remove it... boot with pmVersion=0 -v at chameleon prompt that image is 10.6.0 so not compatible with latest snow edp

well where does it hang.... boot chameleon with the -v flag or transfer your usb extra folder to the hdd

if the hardware is used in a real mac you have a very good chance of it working.... leon has hd3000 working on his e6220 with 10.7.2

put in the resolution your bios info states for graphics

MerryChristmass jtok glad to hear you got it squared up... sometimes hardware issue are the hardest to troubleshoot.

check your bios version and update it to latest, while your in your bios double-check your graphics card info. gma or nvidia and build edp for your model/graphics type. l if resolution is higher than 1200x800 then search forum for a high res dsdt for your model/graphics type i th there might be some floating around here some where...

well did edp2.2 work for you? there are 4 different trackpad options there.

set your sata to to ahci in bios

try -v -x

made a myhack usb from retail app loaded my bootpack installed chameleon onto the usb stick booted to usb fn12 or set it to boot from usb in bios first. installed. once finished booted off the usb selected my new lion ran through the setup... shut off bluetooth first. connected a usb keyboard finished install ran edp pkg installed to lion went to extra and ran edptool.command built for my machine then installed chameleon to the lion partition. should be that simple...

when chameleon is booting hit the spacebar when it pauses type -v it will give you a verbose output. the last couple of lines will tell you whats hung up.

http://www.osxlatitude.com/lion/

run it with -v kernel flag and see where it hangs

http://www.insanelymac.com/forum/index.php?showtopic=267408&view=findpost&p=1746338 same problem but on an hp the kexts fixed his issues maybe they will help with yours. try them in /Extra/Extensions first

i think that happens because of ps2nub kext... but idk if you need it or it has to be removed it only seems to happen on d630. so if you dont have it add it if you have it remove it. it's been a while i don't remember

have you tried removing AppleHDA.kext after backing it up somewhere from s/l/e then rebuilding your caches?

you have to run hdadisabler kext if not it will kp or remove applehda from s/l/e

hey latinmcg nice to see you around again... funny thing is that edp uses voodootscsync so i can't figure why other than the kernel change in 10.6.8 witch had changed into a lion like kernel that does not support core solo after lion release on 10.6.7 it works fine.... maybe replace mach_kernel with 10.6.7 one? idk

there are other trackpad prefpane replacements in edp just make sure to back up your old ones first

well i know it works with option 4 thats what i use for my d620 and d430

well make sure you have IOAudioFamily.kext wherever your running voodoohda if it's in extra then make sure it's there if it is there then copy the one in s/l/e and replace over the existing one in e/e.