Bronxteck

use hibernation fix on edp... option 2 option 2

yeah if you boot -v you will see where your stuck at probably sleep enabler kext. for 10.6.8 use edp 1.9.2 you can try booting with pmVersion=0 -v

try hitting f12 at boot and select usb?

no problem ss... always a pleasure.

make sure you don't have the backlight sensor on in bios while there bring the brightness up to max on both screens bat/no bat. in osx you also have FN key and (look on the right side of the keyboard in blue) up and down arrows. also if that still doesn't work there are options in power management for dim screen on batt. and then theres also the gma brightness fix in edp. and also in chameleon there is a dakewake0 option.

nope.. just bios defaults... i think your going to have to check that hdd with some low level software first like a manufacturer disk maybe MBR is locked up or corrupted or use some hdd erasing software first on it to wipe it all clean.

single user mode will work with a usb keyboard but you have to boot with it plugged in.

have you checked your bios options is trackpad enabled?

Boot into Dos (use unetbootin to install freedos + the bios update to a usb pen

mm yup.

now you need to apply the hibernation fix in edp... option2 then 2. yes they run warm on lion mostly when there is a lot of hdd activity like dropbox sync or spotlight index or video well flash video html5 runs a bit cooler. to keep temps down it needs nullcpu and the sleep enabler. or cookbook patched for lion (quirky) great in snow leopard though.

there are 4 different options available to you during an edp build.... use the one that suits your needs

have you tried disabling hibernation? in terminal type each line then hit enter after each... pmset hibernatemode 0 touch /var/vm/sleepimage rm /var/vm/sleepimage on some of our latitude models they needs a bios password.. you can check the wiki for instructions.... maybe your needs one? idk

with my hack installer method it allows to install osx to mbr formatted hdd.... i have tried it and it works great. once you select the partition in installer then there you format your osx to journaled hfs but next time maybe i will install windows first. make 2 partitions one for windows one for osx then install osx and then chameleon bootmd0. on mine i installed osx first. then windows.

check your temps with istat. maybe it's running hot. check the fan.

search the forum... some one mentioned it recently

i dont know i never used that image... but im sure it still needs chameleon

make sure you have the latest dell bios.

sure it does vorbo... 3. Install the bootloader (attached to post) onto the usb pen – You can download it from below. (Remember to select correct destination) boot loader is chameleon.

should be option 2 "fixes" then option 2 hibernate.

try messing with audio midi settings in utilities our sound prefpane. as for N wifi you might need to rebrand it consult wiki

your welcome...

edp2.2 does not have voodoohda2.7.2 it has 2.7.3? check s/l/e maybe you are running it there? delete it if it is and just to be safe re download edp2.2 from the wiki, reinstall and run edptool.command from Extra build for your model.

well try without the wait command and make sure guy is selected in chame wiz. you can also set your default partition there if you wish... maybe the one you want to boot not the one it feels like choosing...

looks like a chameleon issue reinstall chameleon