Search the Community

[SUCCESS] DELL LATITUDE E5440 macOS Mojave 10.14 (Updated) Download: - - > > "DELL"_"CLO"EFI"_"Kemal"ALKIN".zip" < < - -

Upgraded to 10.14 public beta, so far I have these issues no sound (ALC255) memory is reporting correct amount but about this Mac does not show the memory slots populated, it shows empty. if you have a similar system, before you upgrade do the following back up your EFi and OS. update clover to the latest when installing clover, there is a new option to install apfsdriverloader.efi, without this, once the installation is done, you will not see your OSX drive. if you don't want to load that driver, then you will need the latest APFS.EFI either driver needs to be installed in the Drivers64UEFI folder.

Hi, I'm trying to install macOS 10.14.1 on Latitude 5590 and make the guide. So... 1. Configurate BIOS (v. 1.5.0) Attachments below; change something or it looks ok? 2. Create boot pen https://www.tonycrapx86.com/threads/unifail-install-macos-mojave-on-any-supported-intel-based-pc.259381/#uefi_settings I think that the last solution is the best for create bootable pen drive but need some changes to works with Dell. I mixed folders and can boot the installer. For beginners - mount EFI partition by Clover Configurator and overwrite folders with EFI.zip (Edit: 28.11.2018). 3. Config On installer touchpad (I2C HID and Alps Virtual HID) not work. I don't have a mouse, so is it possible for the touchpad and track pointer to work? I tried file from but 1. not work, 2. i haven't found how to fix it by file and code from the second page. Boot video - WiFi won't work because all Intel Wifi devices aren't supported . BIOS options

Dear mates, yesterday I installed Mojave 10.14 on my system. The thing is that HDMI\VGA is not recognised, just when I start the system with cable plugged in. Was fine on Sierra 10.12.6. I saw some port patch, but they are for desktop version, not mobile. Also tried to replace AppleIntelSKLGraphicsFramebuffer.kext with same kext from Sierra> fixed the problem, but a new problem came up: After sleep PVAP - Hardware encoding broke result in application freezing, video freezing (Safari, yt, pictures, Final Cut, FaceTime, etc.) I can disable Hardware encoding, but then some features not working (Final cut, can't open pictures, thumbnails always loading, etc.). Using platform-id: 0x191b0000 Use this fix to get VGA/HDMI working: https://www.insanelymac.com/forum/topic/316573-sierra-applegraphicsdevicepolicy-clover-patch/ Last: No audio on HDMI Fixed HDMI Audio by installing "FakePCIID_Intel_HDMI_Audio.kext" System: Acer Aspire V5-591G-55TU CPU: i5-6300HQ 2.3 GHz RAM: 8 GB DDR4 (4+4) GPU: Intel HD Graphics 530 + GTX 950M (disabled) OS: Mojave 10.14.1 UPDATE: Updated to 10.14.1 and my outputs are gone again. > To solve this use the "AppleIntelSKLGraphicsFramebuffer.kext" from 10.14 Attaching the clover folder, IOReg

I updated my macOS 10.13.6 to Mojave 10.14 Beta (18A337a) without any problem on my E7450 (model with discreet nVidia). Everything works, with some small issues. Some of those issues might be caused by VoodooPS2Controller (that I haven't used before), so I just switched back to ApplePS2Controller. Clover version: 4568 Injected kexts: Lilu.kext 1.2.6 WhateverGreen.kext 1.2.1 FakePCIID.kext 1.3.12 FakePCIID_Intel_HD_Graphics.kext 1.3.12 FakePCIID_XHCIMux.kext 1.3.12 FakeSMC.kext 6.26-344-g1cf53906.1787 ACPIBatteryManager.kext 1.81.4 AppleALC.kext 1.3.1 IntelMausiEthernet.kext 2.4.0d0 ApplePS2Controller.kext 1.5 Kexts in LE: DisableTurboBoostBattery.kext 2.1 AppleBacklightInjector.kext 0.9.0 BrcmFirmwareRepo.kext 2.2.10 BrcmPatchRAM2.kext 2.2.10 Legacy_Sierra_QMI_10.13.kext 1.4.0 WhateverGreen DVMT 32MB fixup patch (replaces IntelGraphicsDVMTFixup.kext): <key>Properties</key> <dict> <key>PciRoot(0x0)/Pci(0x2,0x0)</key> <dict> <key>framebuffer-fbmem</key> <data> AACQAA== </data> <key>framebuffer-patch-enable</key> <data> AQAAAA== </data> <key>framebuffer-stolenmem</key> <data> AAAwAQ== </data> </dict> </dict> You should check your graphics configuration and change Pci part to match your system if needed. This part is probably critical, since IntelGraphicsDVMTFixup will not work in Mojave. Only other Clover config change (compared to HS config) was removal of Inject Intel and other graphic patches (as suggested in some WhateverGreen thread on some other forum). I have external TP-Link UBS dongle (TL-WN725N), so I do not need Broadcom Wi-Fi kexts. Add them if you use Broadcom Wi-FI card. I need FakePCIID_XHCIMux and Legacy_Sierra_QMI in order to use DW5809e WWAN. Those are not needed if you do not have this WWAN or just do not want to use it. Most the issues that I noticed were related to keyboard and touchpad, so I reverted good old ApplePS2Controller. I absolutely need working Insert key. Other issues are software related. Some 3rd party icons are not always visible (TP-Link Wireless Utility, Logitech Control Center...) Caret (text currsor) is not always visible in Chrome address bar. It is invisible while key is pressed. It is shown on key release. It is very problematic when you need to change some text fast in address bar. Since I am using this for less than a day and my partition is freshly converted to APFS, I guess that SSD activity is related to spotlight indexing of my new drive. To summarize, Mojave works well on E7450. EDIT: Almost forgot. EAPDFix and CodecCommander are not needed since AppleALC now have full EAPD support for ALC293/ALC3235 and almost every other ALC model. EDIT 2: Flawlessly updated to Beta 9 (18A384a) with normal update. Haven't changed anything in kexts nor config. All Chrome Mojave related problems are solved with latest Chrome 69.0.3497.81. Latest Firefox 62.0 adopts Mojave color scheme. It is dark if you use dark Mojave appearance, and light if you are using light one.

Hey! I have a working and stable Mojave running on this Acer notebook. For installation and post-installation use my guide: https://osxlatitude.com/forums/topic/11355-acer-aspire-v-15-v5-591g-mojave-windows-10/ Note: The Mojave bootpack can be used for High Sierra too. If you are using a Single RAM and getting panics at boot add these to your config.plist (SMBIOS->after "Version 1.0") Please edit the frequency and size to match your RAM: <key>Version</key> <string>1.0</string> <key>Memory</key> <dict> <key>Channels</key> <integer>1</integer> <key>SlotCount</key> <integer>1</integer> <key>Modules</key> <array> <dict> <key>Slot</key> <integer>0</integer> <key>Size</key> <integer>8192</integer> <key>Frequency</key> <integer>2133</integer> <key>Type</key> <string>DDR4</string> </dict> </array> </dict> </dict> Thanks to all OSXLatitude members for helping me out! (Jake Lo, Hervé, Bronxteck, black.dragon74)! Here some pictures: