Jump to content

Kernel Panic after booting from Chameleon


vvinushan

Recommended Posts

Hello there. I followed the guide to installing Mac OS X Lion on Dell Latitude D630 and right after loading everything from the Chameleon bootloader, I see a black screen with white writing on it showing a kernal panic:

 

BCM5722D (setupDriver:920): MSI index on 1

panic(cpu 1 caller 0x2ccb0f): Kernal trap at 0x3624703a, type 14=page fault, registers:

CR0: 0x8001003b, CR2: 0x00000000, CR3: 0x00100000, CR4: 0x00000660

EAX: 0x00000000, EBX: 0x0000085a, ECX: 0x00000000, EDX: 0x299cdffc

CR2: 0x00000000, EBP: 0x2ff6bc58, ESI: 0x05eba800, EDI: 0x00000000

EFL: 0x00010246, EIP: 0x3624703a, CS: 0x00000008, DS: 0x00000010

Error code: 0x00000000

 

Debugger called: <panic>

Backtrace (CPU 1), Frame : Return Address (4 potential args on stack)

0x2ff6ba98 : 0x22032e (0x6abf4c 0x2ff6bab8 0x229ef0 0x0)

0x2ff6bac8 : 0x2ccb0f (0x6b8488 0x3624703a 0xe 0x6b8431)

0x2ff6bb78 : 0x2e2e34 (0x2ff6bba0 0x2ff6bb88 0x2ff6bb98 0x5eba800)

0x2ff6bb98 : 0x3624703a (0xe 0xc0048 0x10 0x18000010)

0x2ff6bc58 : 0x3624861c (0x5eba800 0x0 0x4222 0x18000000)

0x2ff6bce8 : 0x36244e26 (0x5ee7a80 0x299cd000 0x1 0x0)

0x2ff6bd18 : 0x362eb798 (0x4222 0x5ee7a80 0x299cd000 0x1)

0x2ff6bda8 : 0x36296d22 (0x25232000 0x8086 0x4222 0x0)

0x2ff6be08 : 0x3623d828 (0x5dc2c00 0x8086 0x4222 0x0)

0x2ff6bea8 : 0x3623fd98 (0x5dc2c00 0x5dc2c00 0x0 0x5dc2c00)

0x2ff6bec8 : 0x647f1d (0x5dc2c00 0x5bb3e80 0x2ff6bef8 0x6064aa)

0x2ff6bf18 : 0x647c86 (0x5bb3e80 0x5dc2c00 0x5dc0480 0x2fb4d3b0)

0x2ff6bf68 : 0x648a7d (0x5bb3e80 0x5d52f80 0x0 0xffffffff

0x2ff6bf98 : 0x64a8a4 (0x5bb3e80 0x0 0x2ff6bfb8 0x1)

0x2ff6bfc8 : 0x2c5d0c (0x5d4fb90 0x0 0x2c5d1b 0x5ba5000)

         Kernel Extensions in backtrace:

               com.apple.driver.AirPortBrcm43224(500.36.11)[081ADA69-2E4E-4EB3-BDA3-1B5233BC5254 ]@0x36230000->0x363a7fff

                     dependency: com.apple.iokit.IO80211Family(400.40)[41868296-83CF-41A4-813C-AB76C81DF1B7 ]@0x36182000

                     dependency: com.apple.iokit.IONetworkingFamily(2.0)[0D1D5E8F-C35E-4D3B-8A74-6D23BCDE48C6 ]@0x36086000

                     dependency: com.apple.iokit.IOPCIFamily(2.6.5)[371238D1-CD26-4E59-B860-D5CA04A2FA09 ]@0x2fb4b000

 

BSD process name corresponding to current thread: kernel_task

Boot args: boot-uuid=47347ABD-AF7E-3EFA-9664-5C333F33BB48 rd=*uuid -v -v

 

Mac OS version:

Not yet set

 

Kernel version:

Darwin Kernel Version 11.0.0: Sat Jun 18 12:57:44 PDT 2011; root:xnu-1699.22.73~1/RELEASE_I386

Kernel UUID: F8596E5D-0966-3091-AA8D-6E11CA68386F

System model name: MacBook3,1

 

System uptime in nanoseconds: 3266526966

 

Can you please help me? Thank you.

 

P.S. I took a lot of time copying this. Just wanted to let you know :).

Link to comment
Share on other sites

  • Replies 39
  • Created
  • Last Reply

Top Posters In This Topic

Thank you for replying. I'm afraid it didn't work. Also, there were differences to the writing that I recognise:

 

Backtrace (CPU 0), Frame : Return Address (4 potential args on stack)

ApplePS2Controller: Timed out on mouse input stream at readDataPort.

 

ApplePS2Controller: Timed out on mouse input stream at readDataPort.

Link to comment
Share on other sites

  • Administrators

Which Lion version did you install or are you trying to install? There often seemed to be trouble with post-10.7.3 versions at initial installation, whereas it's Ok with 10.7-10.7.3 versions (that you can subsequently upgrade to 10.7.4/10.7.5 after EDP has been installed and system build done).

 

Are you getting KP at myHack installer startup or is this happening on boot/reboot after the installation completed?

Link to comment
Share on other sites

  • Administrators

Check your BIOS settings and make sure you've used the right bootpack on your installer then. Or re-make it in case it got corrupt for some reason... For Lion, I also recommend that you boot with option "USBBusFix=No".

Link to comment
Share on other sites


×
×
  • Create New...