neorfey Posted July 2, 2014 Share Posted July 2, 2014 Neorfey, I have a similar card as yours, but even after taping out pin 20 & 51, I can only work the wifi, no bluetooth. would you be kind enough to upload your edited (with the vendor and product id) BTfirmwareuploader kext along with your bluetooth kext for mavericks. I would like to give them a try. Your help will be greatly appreciated. Thanks Hamood i'm using this kext BTFirmwareUploader Link to comment Share on other sites More sharing options...
Administrators Bronxteck Posted July 2, 2014 Administrators Share Posted July 2, 2014 some pcie slots do not have the usb pins wired which is whats used on that card for bluetooth. i have that issue on an HP Elite. Link to comment Share on other sites More sharing options...
hamoodaslam411 Posted July 3, 2014 Share Posted July 3, 2014 i'm using this kext BTFirmwareUploader Neorfey, Thank You I will give it a try. @Broxntexk - The current card was a replacement card for a previous combo card (Wifi + BT), both of which worked, so I can assume my PCIe slot supports BT (its a Toshiba Laptop), so I don't think that might be the problem. Hamood Link to comment Share on other sites More sharing options...
vanquybn Posted July 9, 2014 Share Posted July 9, 2014 I just use BCM943225HMB on my Dell, I got issue with bluetooth light that the light flicker forever when bluetooth mouse connected. if I turn off mouse, it turn back to normal. could you please help me resolve it. Thank you! Link to comment Share on other sites More sharing options...
Administrators Bronxteck Posted July 9, 2014 Administrators Share Posted July 9, 2014 i think it is just letting you know it is paired, if it is working correctly for you otherwise Link to comment Share on other sites More sharing options...
vanquybn Posted July 10, 2014 Share Posted July 10, 2014 i think it is just letting you know it is paired, if it is working correctly for you otherwise Yes, it's working correctly. however when I use Atheros card (DW1702 and some others) the Bluetooth light does not flicker. anyway thank you for reply. Link to comment Share on other sites More sharing options...
pokenguyen Posted July 10, 2014 Share Posted July 10, 2014 Hi Emily, your kext works fine with my HP Broadcom 20702A3, thank you, but are there any improvements using this instead of stock kexts? Also, the bluetooth does not work after sleep. Here is booot log at startup: 7/10/14 11:08:37.000 AM kernel[0]: BTFirmwareUploader :: Broadcom Bluetooth hardware found 7/10/14 11:08:37.000 AM kernel[0]: BTFirmwareUploader :: Using Standalone Firmware 7/10/14 11:08:38.000 AM kernel[0]: BTFirmwareUploader :: Started the upload of firmware (v14 c5563, 69852 bytes)... 7/10/14 11:08:44.000 AM kernel[0]: BTFirmwareUploader :: Successfully patched the firmware. Here is bootlog at wake: 7/10/14 12:45:40.000 PM kernel[0]: BTFirmwareUploader :: Broadcom Bluetooth hardware found 7/10/14 12:45:40.000 PM kernel[0]: BTFirmwareUploader :: Using Standalone Firmware 7/10/14 12:45:41.000 PM kernel[0]: BTFirmwareUploader :: Started the upload of firmware (v14 c5563, 69852 bytes)... 7/10/14 12:45:41.000 PM kernel[0]: BTFirmwareUploader :: Firmware patch failed. I have to press the network button twice to get it working again: 7/10/14 12:51:52.000 PM kernel[0]: BTFirmwareUploader :: Broadcom Bluetooth hardware found 7/10/14 12:51:52.000 PM kernel[0]: BTFirmwareUploader :: Using Standalone Firmware 7/10/14 12:51:53.000 PM kernel[0]: BTFirmwareUploader :: Started the upload of firmware (v14 c5563, 69852 bytes)... 7/10/14 12:51:58.000 PM kernel[0]: BTFirmwareUploader :: Successfully patched the firmware. Link to comment Share on other sites More sharing options...
EMlyDinEsH Posted July 10, 2014 Author Share Posted July 10, 2014 Hi Emily, your kext works fine with my HP Broadcom 20702A3, thank you, but are there any improvements using this instead of stock kexts? Also, the bluetooth does not work after sleep. Here is booot log at startup: 7/10/14 11:08:37.000 AM kernel[0]: BTFirmwareUploader :: Broadcom Bluetooth hardware found 7/10/14 11:08:37.000 AM kernel[0]: BTFirmwareUploader :: Using Standalone Firmware 7/10/14 11:08:38.000 AM kernel[0]: BTFirmwareUploader :: Started the upload of firmware (v14 c5563, 69852 bytes)... 7/10/14 11:08:44.000 AM kernel[0]: BTFirmwareUploader :: Successfully patched the firmware. Here is bootlog at wake: 7/10/14 12:45:40.000 PM kernel[0]: BTFirmwareUploader :: Broadcom Bluetooth hardware found 7/10/14 12:45:40.000 PM kernel[0]: BTFirmwareUploader :: Using Standalone Firmware 7/10/14 12:45:41.000 PM kernel[0]: BTFirmwareUploader :: Started the upload of firmware (v14 c5563, 69852 bytes)... 7/10/14 12:45:41.000 PM kernel[0]: BTFirmwareUploader :: Firmware patch failed. I have to press the network button twice to get it working again: 7/10/14 12:51:52.000 PM kernel[0]: BTFirmwareUploader :: Broadcom Bluetooth hardware found 7/10/14 12:51:52.000 PM kernel[0]: BTFirmwareUploader :: Using Standalone Firmware 7/10/14 12:51:53.000 PM kernel[0]: BTFirmwareUploader :: Started the upload of firmware (v14 c5563, 69852 bytes)... 7/10/14 12:51:58.000 PM kernel[0]: BTFirmwareUploader :: Successfully patched the firmware. Can you PM me your complete system log after sleep along with your device id and ioreg? Link to comment Share on other sites More sharing options...
EMlyDinEsH Posted July 10, 2014 Author Share Posted July 10, 2014 Yes, it's working correctly. however when I use Atheros card (DW1702 and some others) the Bluetooth light does not flicker. anyway thank you for reply. Can you send me your ioreg, system log and device ids of your bluetooth? Link to comment Share on other sites More sharing options...
vanquybn Posted July 10, 2014 Share Posted July 10, 2014 Can you send me your ioreg, system log and device ids of your bluetooth? Hi, My Bluetooth info: VID_13D3&PID_3295 Here are my files. Archive.zip Link to comment Share on other sites More sharing options...
Recommended Posts