Jake Lo

OPENCORE - Ventura Supports Ventura Follow BIOS Configuration above Working: full graphics acceleration on Intel HD520 iGPU, including brightness control (F5 and F6) multi-display with DisplayPort (Video & Audio) audio, microphone input and headset output (F8 and F9) Mute button IS working by Human7900 GigEthernet LAN connection wireless and bluetooth with any compatible card (a DW1560 in my case, no Whitelisting) left and right USB ports including USB Type-C integrated webcam CPU power management sleep (Lid, Energy Saver settings, Apple menu, PWR button) & wake (Lid, PWR button) battery management keyboard and touchpad keyboard backlight (Fn + F3) touchpad with gestures, mouse buttons (can be disable with PrtScr key) RTS522a microSD card reader Not working: Trackpoint and mouse buttons Finger Print reader Wifi button Installation: Download macOS Ventura app Format a 16GB USB drive (GUID / Extended (Journaled)) Create USB Installer with createinstallmedia command Download attached folder and rename as EFI Mount EFI partition and add EFI folder Configure BIOS setting according to guide Boot with USB installer Complete installation Post Installation: Mount EFI partition of newly installed drive and copy EFI folder over Update / Change in Config.plist under PlatformID->Generic (use genSMBIOS or Hackintool.app) MLB, ROM, SystemSerialNumber and SystemUUID Resources: https://dortania.github.io/OpenCore-Install-Guide/ https://github.com/VoodooSMBus/VoodooRMI https://github.com/OpenIntelWireless/itlwm https://github.com/cholonam/Sinetek-rtsx https://github.com/0xFireWolf/RealtekCardReader/releases Updated to OC 0.9.5 Note: Config is set for Broadcom DW1830 If you have Intel, rename Config-IntelWifi to Config.plist Multiboot from OC picker is also working! HP840G3_OC_0.9.5.zip HP840G3_OC_0.8.5_Ventura.zip

your USBMap kext info.plist is still showing MBP13,1, try changing it to MPB14,1 you're also missing AirportItlwm.kext in your kexts folder, not sure if you left that out to fit size requirement upload here or not.

According to IOReg file, it's discovered and loaded Have you tried resetting NVRam?

Ventura - OpenCore Installation: Download MacOS Ventura app Format a 16GB USB drive (GUID / Extended (Journaled)) Create USB Installer with createinstallmedia command Download attached folder and rename as EFI Mount EFI partition and add EFI folder Configure BIOS setting according to guide Boot with USB installer Complete installation Post Installation: Mount EFI partition of newly installed drive and copy EFI folder over Update / Change in Config.plist under PlatformID->Generic (use genSMBIOS or Hackintool.app) MLB, ROM, SystemSerialNumber and SystemUUID Note: Replace Config.plist with Config-IntelWifi.plist if you have an Intel combo card (not tested) SMBIOS, ig-platform-id, device-id, USBPorts kext set to MacBookPro14,1 to support Ventura OC 0.8.5 includes latest Alps by SkyrilHD, supports Alps v7/8 for multi touch Updated to 0.8.5 - Supports Ventura only, won't boot for Monterey and below E7270_OC_0.8.5.zip E7470_OC_0.8.5.zip

Post IOReg file using IORegistryExplorer.app

that's a different topic See here

@isyeikhdevice Have you tried replacing AlpsT4USB with AlpsHID.kext? I don't own one, just a suggestion

what's the model of the hard disk? some NVMe drives are not supported and can cause weird error message example. Samsung PM981, PM981a, PM998 are all not supported.

It might not be related but you have 2 voodooInput enabled in the config file. Either disable for voodoops2 or voodooI2C

Post full system's specs and model Attach EFI folder you're using

OpenCore BIOS: Set to Load Default, apply, then set Boot List Option to UEFI, SATA Operations to AHCI, Enable Legacy Option ROMs Supports Catalina to Monterey Working: Full HD4600 Graphics Acceleration Internal speaker / Headphone jack / Autoswitch (ALC280) HDMI / DP - Video / Audio Dual Displays (DP to DP connections) USB 3.0 ports Sleep / Wake Installation: Download macOS Monterey / Big Sur / Catalina app Format a 16GB USB drive (GUID / Extended (Journaled)) Create USB Installer with createinstallmedia command Download attached folder and rename as EFI Mount EFI partition and add EFI folder Configure BIOS setting according to guide Boot with USB installer Complete installation Post Installation: Mount EFI partition of newly installed drive and copy EFI folder over Update / Change in Config.plist under PlatformID->Generic (use genSMBIOS or Hackintool.app) MLB, ROM, SystemSerialNumber and SystemUUID Note: Rename config-monterey to config.plist if you want to run Monterey! Use layout-id 17, Internal works, front /rear jack works, but need to manually select Use layout-id 16, if you want internal speaker sound, but rear audio jack doesn't work Use layout-id 15, both front and rear audio jacks work, but no internal speaker Wireless works with BCM4350 up to Big Sur, won't boot with Monterey Resources: https://dortania.github.io/OpenCore-Install-Guide/ 9020-SFF_OC_0.8.5.zip

@Bloxxnes Give my files a try here https://osxlatitude.com/forums/topic/6472-dell-latitude-e7240e7440-clover-and-opencore/?do=findComment&comment=104316

did you reset NVRam after each changes?

VGA might not be supported. Try direct HDMI to HDMI or DP to DP or HDMI to DP

It's either your Hynix NVMe or your USB kexts that's the issue If replace with USBInjectall still not working, then it's your NVMe. See here for more info

Try enabling / add port 3

Give this a try, replace the Config.plist and kexts folder Audio layout-id is set to 11 If still no audio, try these different one alcid=13, 22, 28, 44, 66, or 99. Reboot after each change Archive.zip

Post a copy of the EFI and IOReg file using IORegistryExplorer.app v2.1

try setting NVRam at OC picker, hit the spacebar to see the option

there's a tread about it here. if you have the same specs, give it a try with the attached files

here you go, just change the serial, MLB, ROM and UUID. I've never use OC Configurator but from just trying it out, I noticed it upgrade the config file to OC 0.8.3. So if your OC files is still O.7.9, you will encounter error. So either update the rest of your files to OC 0.8.3 or whatever version OC it shows when you launch OC Configurator, or just use OC configurator to generate the serial, MLB, ROM and copy them to your Config file manually. Personally I use Plistedit Pro. You can use Xcode or maybe ProperTree as well. config.plist.zip

Yes

there's 3 areas that you need to change System Serial number, MLB & ROM You can use Hackintool.app as well to generated for the model you're emulating

did you make sure it has unique serial #, etc..

look at the device properties and smbios of this Clover config for an Optiplex 9010 AIO with HD4000 Maybe it might work for you too config9010.plist.zip