Jake Lo

Try this, goes into /EFI/Clover replacing the old Maybe make a backup of your Clover folder first 3050_HD630.zip

What's the exact model of your DW1820a? From your Ioreg, the subsystem ID = 106b, 0022

Have you tested if both HDMI and DP are working before trying anything

Seems you have graphics acceleration but you lost the DP port according to the IOReg file. You only have the internal LCD and 1 HDMI port. Did the wallpaper glitched with your new Config file or mine? With my config file, does graphics not show HD540? I see you have added DW1820a wifi in your Config file, does it work? Last I tested it, my system hang after 10 - 15 minutes of usage.

Try ResXtreme.app http://resxtreme.com

It probably requires write access to /S/L/E See here for unlocking Catalina system partition found in the FAQ section

Not 100% sure what you mean...do you have full graphics acceleration? Post debug file

Try this, replace config and DSDT/SSDT into /EFI/Clover/ACPI/Patched First try DSDT.aml with the SSDT-xx, then try DSDT-slice.aml (rename it to DSDT.aml when use) with the same SSDT-xx.aml Note: DSDT uses EmlyDinesh's method for disabling Nvidia DSDT-slice uses Slice's method linked by Bronxtech E6420_NVS-Disabled.zip

Your Windows must be installed in MBR and not GUID MacOS need to be in GUID format or you could try finding a patch for your MacOS installer using MBR format.

Follow my Clover guide here Make sure to set BIOS to UEFI enabled / Legacy Option Roms enabled/ AHCI enabled / Secure Boot disabled Use attached files as the bootpack after you had install Clover per Guide Replace file contents into /EFI/Clover E5540_Catalina.zip

try add NVMe patch necessary for some NMVe drives Goes under the DSDT/Patches in Config file <dict> <key>Comment</key> <string>IONVMeFamily: Ignore FLBAS bit:4 being set - for Plextor/LiteOn/Hynix</string> <key>Disabled</key> <false/> <key>Name</key> <string>IONVMeFamily</string> <key>Find</key> <data>SBr2wRAPhQ==</data> <key>Replace</key> <data>SBr2wQAPhQ==</data> </dict>

USB issue. Install USBInjectall.kext

when formatting, make sure to enable view by devices and format the whole disk to GUID / Journal Extended. HS will auto convert it to APFS during install. What brand/model is your NVMe drive?

Tab tab and spacebar to select

Compare the Config files, you'll find the differences under ACPI in Config file The SSDT-xx goes into /EFI/Clover/ACPI/Patched

you need external mouse to complete installation, I think it's noted in the guide.

Remove the DSDT.aml from /EFI/Clover/ACPI/Patched and try again If still fails, boot with boot arg -igfxvesa FYI, moving post, this is not a guide

If you mean VoodooPS2Controller for Alps touchpad on the E6430, it does work with finger tips. No sure what else you're referring to without more details.

Muttonhead411 has them added as advised above

Use Legacy Boot

post new debug file

Don't worry about the Origin file, the way it's exported is what is select in the Config file...ex. NoDynamicExtract or NoOEMTableID are enabled. Ioreg files shows no issue with Audio, how are you testing it?

post debug file

Good, DW1707 is not a replacement anyway, save you time from returning later. Not all gestures are going to work even though the touchpad preference shows that it does. You might be able to configure 3 fingers to work though. As for audio, make sure you don't have any other audio kexts install and layout-id 3 is used.

try this, replace Config and add kext to kexts/Other usb.zip