Jake Lo

I see you're using layout-id = 11 Try different layout-id 13, 14 and 56 you can change it in the Config file under Devices / Properties using Clover Configurator

Install BrcmBluetoothInjector.kext, BrcmFirmwareRepo.kext and BrcmPatchRAM3.kext to /L/E from here Repair permissions and rebuild cache

Catalina Catalina Guide Bootpack - HD5500 Only Replace into /EFI/Clover after you install Clover E7450_Catalina.zip - For Discrete Model Also add this to /EFI/Clover/ACPI/Patched SSDT-Disable-DGPU FYI, kexts in bootpack might be outdated Make sure to 1st upgrade kexts found under /EFI/CLOVER/kexts/Other if you encounter issue Common links for new kexts: https://github.com/vit9696/Lilu/releases https://github.com/vit9696/Lilu/blob/master/KnownPlugins.md https://bitbucket.org/RehabMan/ Follow Post Install above under Sierra Guide UPDATES

Catalina Catalina Guide Bootpack Replace into /EFI/Clover after you install Clover E7470_Catalina.zip E7270_Catalina.zip - For Discrete Model Also add this to /EFI/Clover/ACPI/Patched SSDT-Disable-DGPU.aml FYI, kexts in bootpack might be outdated Make sure to 1st upgrade kexts found under /EFI/CLOVER/kexts/Other if you encounter issue Common links for new kexts: https://github.com/vit9696/Lilu/releases https://github.com/vit9696/Lilu/blob/master/KnownPlugins.md https://bitbucket.org/RehabMan/ Note: 1) Post Install: Copy kexts in /EFI/Clover/kexts/Other/CopyToLE to /Library/Extensions. Repair permissions and rebuild cache 2) Enable this patch in Config.plist under KextsToPatch if you have: LiteOn, Plextor, or Hynix NVMe Hynix NVMe patch 10.13.x (Bit swap block size 0x10) -Syscl Finally we have support for SD Card reader (Realtek RTS525a). See here for more info and link to kext UPDATES

Enable Legacy Options ROMS in the BIOS

Let's try hotpatching so no need to re patch after each BIOS update, Replace files into /EFI/Clover Latitude 3470 Catalina.zip

I could be wrong but I think BCM4352 is controller by AirPortBrcm4360.kext Yes, you need BrcmBluetoothInjector.kext, BrcmFirmwareData.kext, and BrcmPatchRAM3 in Clover kext or BrcmBluetoothInjector.kext, BrcmFirmwareRepo.kext, and BrcmPatchRAM3 in /L/E FakePCIID_Broadcom_WiFi.kext is to make 3rd party wifi display as Airport Extreme. I think you're confuse with FakePCIID_Intel_HD_Graphics.kext which is no longer needed with Whatevergreen.kext

1) Yes, VirtualSMC is fine, but you should remove ACPIBatteryManager and pair it with SMCBatteryManager.kext I think Catalina had dropped the AirPortBrcm4331.kext that supports DW1550/DW1510, so you'll need to replace IO80211Family.kext from Catalina with that from Mojave. More details here and you can get a copy there as well. 2) For Catalina, Rehabman's kext won't support. Go with that one you had stumbled onto

You should remove BrcmPatchRAM2, keeping BrcmPatcRAM3 for bluetooth if you plan to add a Broadcom BT in the future. As for the Battery, see Rehabman's documentation here You could try setting different value for FirstPollDelay to get better results 2017-10-01 v1.81.4 add kernel flag "abm_firstpolldelay" to allow override of FirstPollDelay with simple kernel flag entry (config.plist/Boot/Arguments). For example, to set FirstPollDelay to 16000 (16 seconds), use abm_firstpolldelay=16000

The DW1510 does not have Bluetooth, only wifi. If you want the BT/Wifi combo, go with DW1550

Replace files from this post https://osxlatitude.com/forums/topic/12381-dell-latitude-e5470-osx-catalina-update-help/?do=findComment&comment=94931

Which guide did you follow? Make sure it's formatted to GUID / Journal (Extended). And that you have HFSPlus.efi in /E/C/drivers/UEFI

Give this a try, replace into /EFI/Clover Inspiron 3558 Catalina.zip

Try this, patch files from your system Replace into /EFI/Clover Inspiron 5548 Catalina.zip

Replace bootpack from here. Goes into /EFI/Clover

Try this, patched from your files Replace into /EFI/Clover Inspiron_7537_Catalina.zip

can you post debug file?

can you run this again and post the output log show --start 2019-10-24 --style syslog | fgrep "Wake reason"

Give this bootpack a try 5580_Cat.zip

No ACPI folder found. If you boot with the Installer and press F4, the files should be extracted to the Installer's EFI partition. You might have to check the root of the drive for EFI folder if you install Clover Legacy. Please verify. Try creating a folder call ACPI inside the Clover folder before trying again.

Boot to Clover, press F4 and then F2. Compress and attach your Clover folder. I see VoodooI2C trying to load. Are you sure you have an I2C touchpad? I'm pretty sure it only has a PS2 touchpad.

@vega1828 That's an USB port issue, it's not detecting your installer. Which version of Catalina are you installing?

Launch Hackintool.app. Click on the USB tab on the top. On the bottom, click on the i (info) for instructions

Try this, replace into /EFI/Clover Latitude 7400.zip

Replace files with this Config config.plist.zip