Jake Lo

I assume you have a Windows 10 boot disk available. Format the partition to MsDos/ Fat Now boot with the Windows 10 installer, select the correct partition to install to Once installed, it'll automatically boot to Windows only if my memory is correct. Reboot with your MacOS installer, select MacOS partition to boot and reinstall Clover Reboot and you should see both bootable option.

We support the vanilla build using the well known createinstallmedia command Here's a few found here in our forum https://osxlatitude.com/forums/topic/10264-how-do-i-create-a-vanilla-macos-installer/ https://osxlatitude.com/forums/topic/8506-dell-latitude-inspiron-precision-vostro-xps-clover-guide/?do=findComment&comment=94956 https://osxlatitude.com/forums/topic/6472-dell-latitude-e7240e7440/?do=findComment&comment=86943

E74040? Do you mean E7440? Sounds like your installation got corrupted

Post your Clover folder with the updated files

should be ok

Yes, there are few extra Renames under ACPI section. Compare the files

Try going into the BIOS, create new boot Option...point to /EFI/Clover/Cloverx64.efi, give it a name (MacOS?) Move new boot Option to the top Save and boot

Yes, should work for HS as well.

Karabiner-Elements...not Karabiner. I'm using it now on my E7470 typing this very message. I've been using it since Sierra, since Karabiner only supports up to El Capitan.

You can also use Karabiner-Elements app to set the Fn keys. See here for example https://osxlatitude.com/forums/topic/9179-dell-latitude-e7x70-clover-uefi-only/?do=findComment&comment=64816

No issue with audio after wake. No CodecCommander require Try latest bootpack https://osxlatitude.com/forums/topic/9179-dell-latitude-e7x70-clover-uefi-only/?do=findComment&comment=95548

Fn+B will work. For F11 and F12 to work, you need to install VoodooPS2Controller.kext but it's not very functional for this model

Webcam is USB based and should be working OOB if your USB ports are set correctly. That being said, if all usb ports are working and it's still not working, then you particular webcam not supported.

@kup1 No kext is needed, just follow instructions here to inject the device https://osxlatitude.com/forums/topic/7346-applesdxc-driverdsdt-patch-for-o2-micro-sd-card-readers/?do=findComment&comment=87652

If you want to keep it at Raid0, you could try adding this kext to /EFI/Clover/kexts/Other SATA-RAID-unsupported.kext.zip

You might have to disable the wifi card in the BIOS until installation is completed to re-enable it.

Looking at @pellepirat77 's file, the SMBIOS used is MBP10,1 but the USBPorts.kext is set to iMac14,2. Either switch SMBIOS to iMac14,2 or rename all the iMac14,2 in USBPorts.kext info file to MacBookPro10,1 I would recommend the latter since this is a laptop, not a Desktop.

I assumed that fixed the HP audio now?

with SSDT, you need to keep USBInjectAll.kext but remove the port limit patches from Config

Did you end up using the generated SSDT or USBPorts.kext? Make sure to remove the ports limit patches in the Config file. If possible, can you attach them here, I could update my bootpack with it. Cheers

Did you make any changes in the BIOS? Add or remove memory? Add any new hardware?

Have you tried the suggestions above?

If you have Catalina previously installed, no need to create new installer. You could just do an upgrade just like on a real Mac. Can you boot from the SSD? not the installer? Have you tried different USB ports? Post your latest Clover folder

You need to create a USBPort.kext for your system. The port limit patch has already been added to be use with USBInjectAll.kext Follow steps here https://osxlatitude.com/forums/topic/12097-e6530-catalina-gm-problems-with-usb-ports/?do=findComment&comment=94774

I see you're using layout-id = 11 Try different layout-id 13, 14 and 56 you can change it in the Config file under Devices / Properties using Clover Configurator