Jake Lo

Make sure CodecCommander is running after wake. Better install it to /L/E, repair permissions and rebuild cache

@rachanta You can post your request here. Make sure to include all files requested Have you tried AppleALC.kext + Lilu.kext with layout 28, 30 or 33?

Yes, InsanelyDeepak might be able to fix that HP for you if AppleALC don't have the right codec for your system. UHD 630 works just fine on Mojave, the Nvidia might need web drivers, however Hackintosh don't support Optimus. You'll need to disable the Nvidia card anyway to preserve Energy.

It's a known issue with Samsung PM981 not working well on Hackintoshes. You might think about replacing it with a known supported drive. As for headphone, I see you're using a patched AppleHDA.kext. What's and where's the source of that kext? I see it's for an ALC298. Have you tried AppleALC.kext with layout-id 11, known to work on Alienware 17. You could try all these different layout-id 3, 11, 13, 28, 29, 30, 47, 66, 72, 99 You'll need to restore the vanilla AppleHDA.kext to /S/L/E, repair permissions and rebuild cache

Remove OsxAptioFix3Drv-64.efi from /EFI/Clover/drivers64UEFI Install Clover with the following configuration: Install for UEFI booting only Install Clover in the ESP Drivers64UEFI\DataHubDxe-64 Drivers64UEFI\FSInject-64 Drivers64UEFI\SMCHelper-64 Drivers64UEFI\ApfsDriverLoader-64 Drivers64UEFI\AptioMemoryFix-64 Drivers64UEFI\PartitionDxe-64 Add to Drivers64UEFI\HFSPlus.efi (Not included in Clover installer)

Check your BIOS, make sure you have set it to at minimum UEFI AHCI Secure Boot Disabled If you have Windows on it, verify if it has I2C touchpad.

Try this, replace into /EFI/Clover 7577.zip

post debug file

Search in /S/L/E as well. Also make sure you're not booting from EFI on the root of drive. Check for PS2 kext in there too if you are. If all fails, then replace ApplePS2 with VoodooPS2Controller for Alps by Dr. Hurt, although it's not working 100% for v5

Post your Clover folder for review

what PS2 kext are you using? Your system has an Alps touchpad, so make sure you use the one from Dr. Hurt found in this forum.

To be certain, boot to Clover GUI, press the space bar, go down to "Block injected kext" Check under Other or any folders like 10.14, 10.13, etc.. Check for PS2 kext and disable it other than ApplePS2Controller

Check for other PS2 kexts in your /EFI/Clover/kexts folder

Make sure to update your Clover files

Copy this into /EFI/Clover replacing them

Incomplete info. Please follow instruction from link for debug file. As for the recommended wifi devices, you'll need 4 kexts: Lilu.kext AirportBrcmFixup.kext BrcmPatchRAM2.kext BrcmFirmwareData.kext //use BrcmFirmwareRepo.kext if you want it cached in /L/E with BrcmPatchRAM2.kext

@Augusto Sandim What wifi device does it have? Need more information in order to assist

Use Lilu.kext + AppleALC.kext with layout-id = 12 or hex 0x0C Remember to add CodecCommander.kext as well to fix the hissing noise from headphone

Copy the files from USB to the NVME drive after you installed Clover

What adapter are you using for the NVMe drive? Does it come with drivers? My 9020 doesn't have an NVMe slot built-in.

post debug file Intel wifi are not supported. Replace the device with a supported card like DW1560 or DW1830. From your files I see Azul FB loading issue which is strange, Azul FB is for Haswell HD4400/HD4600. Your system should have Skylake HD 530.

Format USB to Fat32 Extract content of ISO to USB Done

Press F3 at boot in case you have hidden partition

sure, it won't hurt

It supports them all, so I guess it's up to your preference.