Jump to content

Jake Lo

Moderators
 View Profile  See their activity

  • Posts

    14365

  • Joined

  • Last visited

  • Days Won

    871

 Content Type 

Everything posted by Jake Lo

  1. Jake Lo
    it shows all ??????? which means it's not tested and no confirmation if it'll work. I'll stay away from it unless you have money spare to test.
  2. Jake Lo
    Here, replace contents into /EFI/Clover Did you check if webcam is showing in system information or when you launch Photo Booth? E7250_mefflecakes.zip
  3. Jake Lo
    Yes, you could check it in the BIOS, if it's shows Intel, it's not supported Replace it with a DW1560 or DW1830 Not familiar with the kext in that link you provided. Give it a try and report back here
  4. Jake Lo
    Probably need to patch your native files... Boot to Clover, press F4 Compress and attach the Clover folder
  5. Jake Lo
    what wireless / bluetooth card does it have?
  6. Jake Lo
    Click on the FAQ link in my signature
  7. Jake Lo
    You need to clean up a bit, you have both Lilu.kext and AppleALC.kext in /L/E and /S/L/E. Remove them from those locations and have them in Clover/kexts/Other only Use layout-id 3. Make sure AppleHDA in /S/L/E is vanilla. Repair permissions and rebuild cache
  8. Jake Lo
    Error shows converting to APFS issue. In your drivers64UEFI folder, you have both ApfsDriverLoader-64.efi and APFS.efi. You don't need APFS.efi, ApfsDriverLoader-64.efi will be enough since it'll load the correct version of APFS.efi for the version of OS X you're running.
  9. Jake Lo
    Try them all, these are the layout-id associated with this codec 3, 11, 12, 20, 21, 28
  10. Jake Lo
    Try this, replace contents into /EFI/Clover https://osxlatitude.com/applications/core/interface/file/attachment.php?id=19597
  11. Jake Lo
    Give this a try, replace contents into /EFI/Clover 7577_HS.zip
  12. Jake Lo
    try layout-id 12
  13. Jake Lo
    Yes, it's a combo card with Wifi and Bluetooth. Did you copy the kexts in /EFI/Clover/kexts/Other/CopyToLE to /Library/Extensions Repair permissions and rebuild cache? If that still doesn't work, then Post the debug file
  14. Jake Lo
    ???? What Lilu issue? Did you add boot arg -ath9565 to Config file?
  15. Jake Lo
    Sounds like the SD card (USB based) is not powering back up after sleep, you should try installing to an internal SSD drive. As for HDMI audio, if it was working prior then I guess the new patch forcing it to display HDMI is not as important. Launch the Config file with Clover Configurator, navigate down to KextToPatch and disable the HDMI Audio patch. See if that restores the HDMI audio for you after reboot.
  16. Jake Lo
    I think you got the wrong codec IDT 92HD81B1C5, should be IDT 92HD81B1X5 Remove the patch AppleHDA from /EFI/Clover/kexts/Other and add Lilu.kext + AppleALC.kext Use layout-id 3 Remove or disable the AppleHDA patch under kextToPatch
  17. Jake Lo
    Give this Config a try. Add the following patches: Add HDMI audio @ port #5 Convert DP to VGA @ port #6 config.plist.zip
  18. Jake Lo
    Connector type shown as DisplayPort in IOReg, did you test if HDMI audio works? Does system have DisplayPort? FYI, the Radeon is disabled via DSDT/SSDT patching.
  19. Jake Lo
    Known Issue & Workaround for my Skylake, see if it also works for you. HDMI-Output works but if connect HDMI-Cable the local Display goes off and never appears. I had tried different configurations but none panned out. Here's a workaround: Close the LID until you see the HDMI display becomes the primary display, then open the LID. It'll switch LCD as primary and HDMI monitor as secondary.
  20. Jake Lo
    Give this a try, replace contents into /EFI/Clover E6320_HS.zip
  21. Jake Lo
    Replace ApplePS2Controller with Dr. Hurts version of Alps VoodooPS2Controller R6
  22. Jake Lo
    Your generated SSDT is for 10.11.5, I thought you installed Sierra. Try this. Make a backup of ACPI + Kexts folder + Config file Now replace the attached into /EFI/Clover E6220_coleman.zip
  23. Jake Lo
    post your current clover folder what issue are you having while upgrading? post KP or error Your Clover version is really old, should at least upgrade to the latest
  24. Jake Lo
    Here's your new patched files Post IOReg file with HDMI monitor connected patched.zip
  25. Jake Lo
    they are basically the same except for bigger screen and E7450 has the track stick. If still have issue then press F4 at Clover GUI. Then compress and attach /EFI/Clover/ACPI/Origin folder. I'll patch the files for you.
×
×
  • Create New...