Jake Lo

Just to confirm, boot to Clover GUI, select Options go to ACPI patching/DSDT Fix Mask check to see if FixHeaders is enabled Reason is different version of Clover reads it from different location

You need Optimus enabled, the NVS is not supported. in Clover, go to Options and enable FixHeaders, under ACPI fixes I think

same KP? Probably need to update to latest Lilu.kext & IntelGraphicsFixup

either remove disable VboxHfs from config file or add HFSPlus.efi to /EFI/Clover/drivers64UEFI found in my Generic EFI folder

try this config config.plist.zip

boot with verbose & debug 0x100 by tapping spacebar at Clover Post KP

You can or just install latest Clover on top to have the latest drivers.

Will work on E6530 as well.

Reset BIOS to load default. Apply and then change to UEFI, AHCI, Legacy Options ROMs disabled, secure boot disabled Reboot to Clover and re-extract raw files with F4 attach for re-patch

run from terminal if you have the ALPS kext installed. Won't work if you have SmartTouch or VoodooPS2Controller (Rehabman's) for Synpatics installed. log show | grep ALPS

You should NOT have all *Fix.efi together, only test 1 at a time. is there CSM or Legacy Option in the BIOS? Enable that if there is

Post your Clover folder for review

Try this version https://osxlatitude.com/forums/topic/8285-refined-alps-touchpad-driver/?page=69#entry77120 smarttouchpad is for Synaptics, not Alps.

KP is due to ACPI error, not Lilu+IntelGraphicsDVMTFixup since you make changes to the BIOS. Here replace it to /E/C/ACPI patched.zip

Here you go. Replace contents into /EFI/Clover catmater.zip

if that's all you want, sure here you go DSDT.aml.zip

Can't patch without the entire Origin folder untouched.

Change settings back...

It was assumed you have the correct BIOS setting already since you had Sierra running perfectly, not much difference for HS. But just to be sure, E6430 runs perfectly fine with UEFI.

Don't see any EDID inject in the Config file.... Those symptoms are EDID related.

High Sierra Guide https://osxlatitude.com/forums/topic/8506-dell-latitude-inspiron-precision-vostro-xps-clover-guide/?do=findComment&comment=74275

what kext(s) did you install / upgrade?

You mean Wake Up does not work like blank screen? Could be an EDID issue...try this

No need to reinstall, just need to fix the EFI partition with latest boot files. If you have access to a Mac to create the installer, then you're set. Actually just need an USB, installer latest Clover on it and copy latest boot files to it will be enough. You can then boot with the USB, select the SSD to boot. Then when you get to the desktop, you can mount the EFI and update the files from the USB. Use this as the bootpack, goes into /EFI/Clover

Bios Settings https://osxlatitude.com/forums/topic/9086-e6230-bios-settings/ High Sierra Guide https://osxlatitude.com/forums/topic/8506-dell-latitude-inspiron-precision-vostro-xps-clover-guide/?do=findComment&comment=74275 E6230 full working bootpack -> files go into /EFI/Clover https://osxlatitude.com/forums/topic/10235-high-sierra-in-dell-latitude-e6230-with-clover-everything-works-but-3-things/?do=findComment&comment=78736 Don't forget Post Install from here