Jake Lo
-
Posts
14365 -
Joined
-
Last visited
-
Days Won
868
Content Type
Profiles
Articles, News and Tips
Forums
Everything posted by Jake Lo
-
Can you make sure the BIOS is set to Default. Apply it and then set SATA Operations to AHCI, and boot List to UEFI. Leave Legacy Rom enabled.
-
Try this Config. Clear the Origin folder and Patched folder. When you get to the Clover menu, Hit F4, wait a couple of seconds and then hit spacebar to boot with verbose mode.
-
When you get to the Clover menu, hit spacebar, select verbose mode. Post the screenshot of where it hang. You can use the Clover attached by E5450, just replace the Config.plist and remove the DSDT/SSDT for the Patched folder.
-
See here regarding the change of DVMT to 64MB. The config and DSDT won't work for you from those 2 posts as they are patched for HD 4400. Try this config, it should be able to get you through the installation. We'll work on getting QE/CI after a successful install. Remove the DSDT, we'll work on that as well after. config.plist.zip
-
Another way? You mean Chameleon instead of Clover?
-
Depends...what Wireless device does it have? If it's an Intel, it's not supported and will need to be replaced.
-
The 9MB patch is to fix the artifacts on the Apple Menu Bar, what glitches are you referring to?
-
Set BIOS to UEFI Click on the Add Boot Option Under Boot Option Name:, just a name, i.e. EFI or Clover... Under File Name: on the right, click to browse Files System should be FS0 Select EFI/Clover/Cloverx64.efi Hit Ok and Ok again Now set the newly created Clover to the top of the list and hit Apply
-
try this config.plist.zip
-
SSDT-8 is for disabling Nvidia card, does your system have optimus enabled? During Clover boot, hit the spacebar and select verbose mode. Want to see where the hang is at and post it here.
-
you probably could remap the keys through DSDT but I'm not skilled to do that. for audio after sleep, did you do this? Install this to /S/L/E to fix audio after sleep issue
-
What you need is SSDT-6. Here's the compiled file. Compile SSDT-7 as SSDT-8 from the guide. SSDT-6.aml.zip
-
There's something odd with this file, it can't find the address 0x00020000 to patch for HD 4600. Can you upload the whole dump folder Origin from Clover?
-
Yes, go ahead and upload it. Compress it first.
-
You could follow this guide
-
VoodooPS2Controller should be in /EFI/Clover/Kexts/10.10. Without it, you won't have keyboard and mouse capability. To control brightness, use Fn+F3 = dim Fn+Insert = Bright Your Bluetooth should be working with a firmware uploader here. Try version 2.8.5. Install to /S/L/E
-
Install these from 10.10 to /System/Library/Extensions with kextwizard AppleHDA_ALC292 DisableTurboBoostBattery FakePCIID_HD4600_HD4400 FakePCIID IOAHCISerialATAPI_Injector Install this to /S/L/E to fix audio after sleep issue Replace the Config with attached and add the DSDT.aml to ACPI/Patched For SSDT, use ssdtprGen.sh found in my Yosemite Guide. E7x40.zip
-
Use the DSDT included in my previous posts. For SSDT, you can try FireWolf's unofficial ssdtprGen.sh for Broadcom CPUs.
-
Yes, it's safe.
-
SSDT is for i7-5600U, so you'll have to generate your own. NewWay fix has been know to KP on some of my Latitude system, but not for this model.
-
Shouldn't be an issue getting Yosemite on it. Without full specs, don't know if wireless will need to be replaced. GT 540M won't be supported, but HD 3000 will have full support.
-
That's correct. Don't change anything on your EFI folder, except moving your kexts from 10.9 to 10.10 or Other
-
You can install over your current system since you're using Clover. You can download the Yosemite app through AppStore. Follow the same Clover guide as the Mavericks.
-
Your installer is corrupted or issue with your USB. Try booting from the USB 2.0 port.
-
Are you following the Chameleon or Clover guides? What type of issue are you encountering? Please list errors, boot with -v to see where it hangs.
