Jake Lo

So you're able to install ML with Leon's boot pack? Can you confirm your maximum display resolution? You could check that in the BIOS too.

Ok, remove VoodooPS2Controller, VoodooPS2Keyboard, and VoodooPS2Mouse, and replace with this. ApplePS2Controller.kext.zip For keyboard modification, go to Preference/keyboard and select modifier keys on the bottom right.

Try removing VooodoooPS2Keyboard, run myfix (quick) and reboot.

Run myfix (full). See if that helps with the automatic sleep. If not, add a -f switch to the boot.plist. Can you confirm a few things? Does audio work? Does HDMI work? Does HDMI Audio work? Sleep works, that's confirm Does it sleep and wake when closing and opening lid? Screen brightness is controlled by Fn+Pause and Fn+F3 or Fn+up and down button Audio control is by the right side Keyboard backlit is controlled by Fn+right arrow Screen snapshot is by Fn+PrintScrn Fn+F1 for sleep, tab power button to wake You'll have to replace the wireless card I believe.

Maay, Try adding the attached files to your bootpack. If you have voodooHDA, remove it and AppleHDADisabler as I've included a patched AppleHDA. Remember to run my fix(quick). Extra.zip

Give my bootpack a try. You should consider upgrading your BIOS too. Extra-E5420_Mav.zip

Can you go to the BIOS and check what you have for Audio? Is it 92HD90...

This thread is about E6320 and should not have any USB 3.0 ports and the AppleHDA (92HD90Bxx) attached above is for Exx20 models. If you have an E6230, then use bootpack files here. Don't include the SSDT as you have different processor.

KextUtility install file to SLE, you should stick with myHack when you update kext. Put new kext in E/E, run myHack/myFix (quick).

Strange, mine automatically comes on with HDMI when plugged in. Not using dock.

Files from that link are for 1st generation Intel HD graphics, you have a 3 generation Intel HD graphics.

so was it a BIOS setting that fixed it? What error are you getting when you try to play a DVD? If it's the error I posted, yes, try that fix.

This new version of AppleIntelE1000e seems to have fix the issue.

Try the following: Turning Wifi off and on. Deleting Wi_Fi and re-add Check wifi switch is turn on on the side Make sure the antennae is plugged in correctly and not loose Try moving the card to WWAN, use the black and gray antenna there.

You don't need to reinstall every time. Just boot with your USB Installer, run myHack and install Extra, point it to the boot pack. As for multitouch, some members mentioned they use v5 on their E6330. Give that a try.

DW1510 should work OTB, no kext, not roll back necessary. Perhaps you got yourself a dud there. Run lspci -nn and see if it's really what you thought you bought. It should look like something below Network controller [0280]: Broadcom Corporation BCM4322 802.11a/b/g/n Wireless LAN Controller [14e4:432b] (rev 01)

Ok, in the meantime, you could upgrade your installer to 3.3.1 by downloading it Run myHack, select install myHack Utilities and point to the USB Installer Then run myHack again and select Install Chameleon and point to the USB Installer If you encounter the error below installing the utility, go to the installer S/L/E and delete myHack.kext and start again.

If you have AppleACPIPS2Nub in E/E, remove that as well.

yes, you need to be connected. Try this for Lan. Put it in E/E and run myfix(quick).

Have you tried reseating the drive? Go to the BIOS and see if it shows up there, under Modular Bay Device. Check your BIOS settings to see it you have disable anything under Miscellaneous Devices. Better yet, set the BIOS to default. Apply and then go back and change SATA Operation to AHCI and disable Optimus. Apply, reboot and see if it appears.

steno and trafsta, Can you upload screenshot of the error? Verify what version of the AppleIntelCPUPowermanagement you're using and for what version of OSX? What version of OSX are you targeting for? What version of myHack are you using? In the BIOS, set it to default, apply, then go back and change Sata to AHCI. You can tweak it later once you got it running.

You can't have both. Either use ApplePS2Controller or VoodooPS2Controller.

Yes, works perfectly OTB. Same ones I'm using.

I forgot to mention, did you remove AppleACPIPS2Nub and ApplePS2Controller from E/E?

If you already have a bootable OSX with myHack method, head over to EDP to complete your build.