Jump to content

Bronxteck

Administrators
 View Profile  See their activity

  • Posts

    5778

  • Joined

  • Last visited

  • Days Won

    124

 Content Type 

Everything posted by Bronxteck

  1. Bronxteck
    have you read this about UHD630? https://www.firewolf.science/2018/11/coffee-lake-intel-uhd-graphics-630-on-macos-mojave-a-nearly-ultimate-solution-to-the-kernel-panic-due-to-division-by-zero-in-the-framebuffer-driver/
  2. Bronxteck
    looks like it might be stalling enumerating usb-c port. if you have made a usbpower /usbport.kext maybe try disabling it during boot.
  3. Bronxteck
    Atheros cards are no longer natively supported in Mojave you might need kexts from high Sierra
  4. Bronxteck
    did you set your hibernate mode to 0?
  5. Bronxteck
    you can try disabling IntelGraphicsDVMTFixup.kext from clover GUI press space bar for the option.
  6. Bronxteck
    so far yes.
  7. Bronxteck
    im not sure but i guess you can always disable the intel injection from config or clover GUI. basically you just have to try it to see what direction you need to go in.
  8. Bronxteck
    ok i see. are you sure you are formatting the SSD properly with disk utility maybe it is not showing up in the selection menu and you are accidentally installing to the 16gb usb installer which is not enough room to install macos too?
  9. Bronxteck
    so what's the issue? make more room.
  10. Bronxteck
    are your bios at at least A09?
  11. Bronxteck
    I had a similar issue reseting the power profiles works for a bit but I ended up having to reinstall Mojave clean since I had upgraded from Sierra I guess there where bad permissions somewhere.
  12. Bronxteck
    you might have to connect an external screen then install the Nvidia web drivers from Nvidias site.
  13. Bronxteck
    you can try fusing both drivers to see if it helps. use the voodoops2controller kext with the keyboard that works and swap out just the trackpad kext inside the plugins folder with the one that works.
  14. Bronxteck
    ok if it gets stuck on waiting for root device then that is most likely caused by the USB port dying during load so try different ports. or try pulling it out and putting it back in at that point on another port.
  15. Bronxteck
    according to https://github.com/acidanthera/AppleALC/tree/master/Resources/IDT92HD93BXX layout 12 is the correct layout id. are you sure you dont have other audio related kexts that are not the apple stock ones in maybe S/L/E or in L/E also check the clover kexts os version your booting folder. i believe also clover rev 4700 has also injection issues. if you are on that version update it to latest also
  16. Bronxteck
    make sure to have latest lilu and applealc. some older versions of lilu had injection issues. also make sure they are in clover/kext/other folder. and that you have injection set to yes not detect in clover config.
  17. Bronxteck
    the issue is the firmware for those models DW1510, DW1550, DW1560 probably a few others are outdated. dell has not released any new firmware's for them as they are manufacture specific even though the hardware States 2070a.
  18. Bronxteck
    root device being? USB thumb Drive? internal HDD/SSD? CD-ROM iso, ect....?
  19. Bronxteck
    yup... sounds about right. the author no longer updates the code.
  20. Bronxteck
    have you tried some of the WEG boot flags they are listed here
  21. Bronxteck
    yup... that sounds about right.
  22. Bronxteck
    the link is on the first post
  23. Bronxteck
    That machine does not support mojave. it might be supported in snow leopard and maybe lion.
  24. Bronxteck
    i think you can adjust speed with the trackpad prefpane if not you might have to edit the trackpad kext info.plist also i do not believe apple uses PrtScr and Insert buttons hence why they might not be working.
  25. Bronxteck
    you have to manualy edit the info.plists in the kext to keep the settings permanent.
×
×
  • Create New...