katta Posted October 1, 2012 Share Posted October 1, 2012 This is the errore that i get after upgrading from 10.8 to 10.8.2 Link to comment Share on other sites More sharing options...
Administrators Bronxteck Posted October 1, 2012 Administrators Share Posted October 1, 2012 it states your missing appleps2controller kext re install your trackpad kext Link to comment Share on other sites More sharing options...
katta Posted October 4, 2012 Share Posted October 4, 2012 Thank you. Successfully updated to 10.8.2. Now i'm waiting my Dell W1510 in order to have wireless working! Link to comment Share on other sites More sharing options...
v3ct0r Posted October 4, 2012 Author Share Posted October 4, 2012 Thank you. Successfully updated to 10.8.2. Now i'm waiting my Dell W1510 in order to have wireless working! Good to hear! Does the keyboard/mouse delay still occur at login? Link to comment Share on other sites More sharing options...
katta Posted October 4, 2012 Share Posted October 4, 2012 Good to hear! Does the keyboard/mouse delay still occur at login? To resolve the keyboard/mouse issue i had to disable wifi form bios. I have a DW1520 as wifi card. Link to comment Share on other sites More sharing options...
v3ct0r Posted October 4, 2012 Author Share Posted October 4, 2012 To resolve the keyboard/mouse issue i had to disable wifi form bios. I have a DW1520 as wifi card. That's really wierd... But at least you solved your problem...should be fixed with the 1510 wireless card. If not, try removing the two wireless kexts from /Extra/Extensions Link to comment Share on other sites More sharing options...
tonfunk Posted October 10, 2012 Share Posted October 10, 2012 I tried this guide yeserday with a recently downloaded os x 10.8.2 on my Latitude e6410. At the end of the installation process it was pointed out that os x could not be installed on my system. The log mentioned error code 121 (kextcache .71 ..something..). What have I done wrong? Link to comment Share on other sites More sharing options...
v3ct0r Posted October 10, 2012 Author Share Posted October 10, 2012 I tried this guide yeserday with a recently downloaded os x 10.8.2 on my Latitude e6410. At the end of the installation process it was pointed out that os x could not be installed on my system. The log mentioned error code 121 (kextcache .71 ..something..). What have I done wrong? I don't think you did anything wrong (so far as I can tell from the information you have given me); this sometimes happens on Hacintosh systems. It says the install failed but in reality, everything went fine! If you can reboot into Mountain Lion, should be good. From there you can continue with the guide. If not, reboot with "-v" (without quotes) and post the place where it hangs at here. Good luck! Link to comment Share on other sites More sharing options...
tonfunk Posted October 11, 2012 Share Posted October 11, 2012 Hi patel4prez, thanks for the quick response. I've done as you suggested. There was no bootloader present on the mashine. I used the bootloader from the usb stick. In normal boot up no spinning weel but the apple logo appeared and after a while the laptop coolers went quite and nothing happens. In verbose mode the last message was: MAC Framework successfully initialized using 16384 buffer headers and 10240 cluster IO buffer headers IOAPIC: Version 0x20 Vectors 64:87 ACPI: System State [s0 S3 S4 S5] PIM64 (36 cpu) 0xf80000000, 0x80000000 [PCI configuration begin] than again the mashine went quiet. Many thanks in advance! Link to comment Share on other sites More sharing options...
v3ct0r Posted October 11, 2012 Author Share Posted October 11, 2012 Hi patel4prez, thanks for the quick response. I've done as you suggested. There was no bootloader present on the mashine. I used the bootloader from the usb stick. In normal boot up no spinning weel but the apple logo appeared and after a while the laptop coolers went quite and nothing happens. In verbose mode the last message was: MAC Framework successfully initialized using 16384 buffer headers and 10240 cluster IO buffer headers IOAPIC: Version 0x20 Vectors 64:87 ACPI: System State [s0 S3 S4 S5] PIM64 (36 cpu) 0xf80000000, 0x80000000 [PCI configuration begin] than again the mashine went quiet. Many thanks in advance! Did you use the E6410 ML 10.8.2.zip to create the installer? Link to comment Share on other sites More sharing options...
Recommended Posts