Jump to content

Jake Lo

Moderators
 View Profile  See their activity

  • Posts

    14365

  • Joined

  • Last visited

  • Days Won

    868

 Content Type 

Everything posted by Jake Lo

  1. Jake Lo
    Conflict in your Config and DSDT file. Here's the fixed files. Not sure if sleep will won't on dual graphics enabled. Will have to check with the OP. In your kext/Other folder you have 2 USB kexts, USBPorts and USBMap. Should be one or the other, not both. But looking at USBPorts.kext, it's not config for this system, it's hardcoded to IMac14,2. M6800_audio.zip
  2. Jake Lo
    Did you format drive with GUID / Extended Journal? Did you install Clover with UEFI Only? EFI Mounter no longer works on Catalina. You need ESP Mounter Pro 1.9 or use Clover Configurator to Mount EFI
  3. Jake Lo
    GPi0 _STA Skip is incorrect, change it from 13 to 14 and try again. You can disable the 2 kexttopatch by CoolStar. No longer needed for I2C since v2.3
  4. Jake Lo
    @hectorox Post the DSDT you're trying to patch
  5. Jake Lo
    Ok, looks like Config-2 does set I2C1/TPD1 _crs to XCRS correctly. GPI0/_STA is already returning (0x0F), but go ahead and enable it and see if it makes a difference. Post new System DSDT
  6. Jake Lo
    @ahalol Depending on which version you're using, it might not have the sleep/wake fix. The version known to work after sleep is R6 found on the 1st page
  7. Jake Lo
    You can find the address from Windows. Going into properties of the Wireless device, click on Details. Under Property, select Location paths, this should get you the address ie PCIROOT(0)#PCI(1C06)#PCI(0000) -> (PCI0@0->PCI@1C,6->PCI@0)
  8. Jake Lo
    post debug file
  9. Jake Lo
    I thought you need help with OpenCore. Sending me system DSDT from Clover doesn't help me to help you. Send me system DSDT from OpenCore to see if the patch work or need tweaking.
  10. Jake Lo
    what does the system DSDT look like in OpenCore?
  11. Jake Lo
    alc_fix is to restore audio after wake what you need is CodecCommander install to /L/E
  12. Jake Lo
    Try these 2 Config, see if any or both works 7480_OC_I2C.zip
  13. Jake Lo
    ??? Does that mean they are working now?
  14. Jake Lo
    The DW1830 requires 3 antennas. Did you plug in all 3?
  15. Jake Lo
    Hmm, according to the IOReg file, your wifi is working but no sign of Bluetooth. Are you sure it's the other way around? Check bios if it's enabled Switch out BrcmPatchRAM2 with BrcmPatchRAM3 for Catalina.
  16. Jake Lo
    disable wake for network access under Energy Saver
  17. Jake Lo
    1) AirPort Utility status - Not Installed Normal. Shows same on Real Mac running Catalina 2) screen shot all screen, must press "Alt + Shift + 3" not "Window +Shift + 3" "Alt + Shift + 3" is correct. Alt = Command, "Windows key" = Option If you prefer the other way around, you can swap the keys in keyboard preference. 3) What keyboard type do you have? Just select ANSI 4) For touchscreen to work, install touch-base 3rd party app. Pricey ~$130+ but you can request for a 30 day trial VoodooI2C + VoodooI2CHID should have UPDD drivers integrated
  18. Jake Lo
    replace SSDT-UIAC*.aml with this one in Patched folder. If using config 2, make sure to remove USBPort.kext as well SSDT-UIAC-touch.aml.zip
  19. Jake Lo
    No, it's the same for HD530 also. No known fix.
  20. Jake Lo
    try different layout-id 13, 14 , 16, 21 by the way, hard to read the screen shots. Just run this and it should list all the 3rd party kexts that are added. Remove all found except CodecCommander in /L/E. Then run the below command again. sudo kextcache -i /
  21. Jake Lo
    Does sleep / wake work for you?
  22. Jake Lo
    Launch Clover Configurator and select install drivers, under UEFI 64 bit, select CsmVideoDxe. Target should be the EFI partition, so you need to mount the drive first. To get rid of that huge cursor, in the Config file uncheck enable mouse under GUI.
  23. Jake Lo
    only kext you could remove is AirportBrcmFixup since you don't have a built in wifi card but an USB you could remove SystemProfilerMemoryFixup, if you don't want to see the memory tab when looking at "About this Mac" but that is it, all other kexts are necessary. Actually you're missing the battery kext SMCBatteryManager.kext Unless you have more kexts added to /L/E or /S/L/E? I wonder how you got the battery status showing
  24. Jake Lo
    Your files are mostly made for a laptop. You can delete all the ssdt's in the patched folder. Remove USBPorts.kext, made for another system You can remove all the voodoo* .kexts
  25. Jake Lo
    /Library/Extensions. Never need to install anything to /S/L/E
×
×
  • Create New...