Jake Lo

Your Clover is really old, upgrade it to the latest. Use the following settings: Install for UEFI booting only Install Clover in the ESP Drivers64UEFI\OsxAptioFixDrv-64 You could just copy the files from my Generic EFI if you don't have access to a Mac to do it. Then replace the attached contents into /EFI/Clover P50-A.zip

Post your Clover folder for further review

Try edit: link removed

Did you follow instruction from post #8? Instruction on how to create the installer and bootpack attached

@sunilkumar Also??? You should replace it into /EFI/Clover/kexts/Other If you have an other PS2 kexts in ../kext/Other, /S/L/E, or /L/E, remove them. Repair permission and rebuild cache

You're using a Distro (HackintoshZone)...that's a bad idea because you don't know what's been removed from the ISO. In your case, it looks like all the Intel HD graphics kexts has been removed which is why you don't have full graphics acceleration. You need to restore all the Intel HD graphics kexts; at minimum for HD 4000 to work, you need these restore to /System/Library/Extensions AppleIntelFramebufferCapri.kext AppleIntelHD4000Graphics.kext AppleIntelHD4000GraphicsGLDriver.bundle AppleIntelHD4000GraphicsMTLDriver.bundle AppleIntelHD4000GraphicsVADriver.bundle You're running HS 10.13.0, you could try updating to 10.13.3, that might add the kexts back for you. But first make sure to upgrade Clover and Lilu.kext & it's plugins otherwise might might encounter a Kernel Panic. You might want to change the SMBios as well, iMac14,2 is wrong for this system, go with MBP9,2. Use latest Clover Configurator to generate it. Click on FAQ in my signature for any question you might have regarding repairing and rebuilding cache after updates.

0x0 -> 0xffff 0xffff being the highest

Yes, those are most updated versions? If still failed... Try going into Options when you see the Clover loader, use the right arrow to navigate Select ACPI patching-> Tables Dropping-> Go all the way down and deselect Drop all OEM SSDT Check all the Drop "SSDT-xx" below that Select Return Change DSDT name: BIOS.aml or anything other than DSDT.aml Select Return, Return Hit spacebar to select Verbose mode + debug 0x100 mode What the above does is to not use the patched DSDT/SSDT if it's a BIOS dependent issue. Post result with this setting...

What Ethernet? What Wireless? What Touchpad? Which BIOS version? Which OS X are you trying to install? Kabylake system is only supported from 10.12.6 and up We'll start from there...

Compress it first

To rule out if it's a DSDT issue... Try going into Options when you see the Clover loader, use the right arrow to navigate Select ACPI patching-> Tables Dropping-> Go all the way down and deselect Drop all OEM SSDT Check all the Drop "SSDT-xx" below that Select Return Change DSDT name: BIOS.aml or anything other than DSDT.aml Select Return, Return Hit spacebar to select Verbose mode + debug 0x100 mode

A22 was the latest, it suppose to fix the recent Meltdown vulnerability. I guess Dell must have pulled it The bootpack I attached is for High Sierra. The fakepcIID kexts are inside /kexts/Other/LE which you move to /Library/Extensions during post Install Post a screenshot of the issue you're having while installing HS. The brightness level is hardcoded in the Config file "BacklightLevel", it should be 50%, but you could try changing it to a different value.

Enable the 3 AppleHDA hot patches in Config file

try removing Shiki.kext

You have a better screenshot of the KP other than the one in post #9 Post a new one with the changes.

Keep OsxAptioFixDrv-64.efi and remove the other

http://www.insanelymac.com/forum/files/file/353-asus-zenbook-ux31a-dsdt-clover-kexts-mac-os-tested-10102/ #10 this shows Mic working but not sure if the files will work on HS http://www.insanelymac.com/forum/topic/283038-asus-zenbook-prime-ux31a-db51-ultrabook-fixes-mods-tweaks-etc/page-53?do=findComment&comment=2548469 This shows using Lilu.kext + AppleALC.kext, I believe layout-id 3 on HS

You still have OsxLowMemFixDrv-64.efi & OsxAptioFixDrv-64.efi in /E/C/drivers64 Need only 1 or the other.

Follow instructions from here to debug issue gen_debug -sysprofile

Post KP while booting with verbose + debug 0x100 mode I think it's due to the Config not synching with the version of Clover you're using.

See post #4 above. Unless yours has a different audio card Post screenshot of Status with DPCIManager

Try replacing DSDT/SSDT with attached Add the 2 kexts to /EFI/Clover/kexts/Other 5480_I2C.zip

This is what I have running on El Capitan, Sierra and High Sierra Audio, SD Card reader, Battery Status, all working including sleep/wake with LID Make sure Optimus is enabled in the BIOS Replace contents into /EFI/Clover BIOS version A13. E6430_NVS-Disabled.zip

Disable "Enable Legacy Option ROMs" - should fix the power adapter hanging and Ethernet issue Cap Locks is a known issue with the current PS2 kext, not update version for now. Workaround, tab twice to enable Lock, twice to disable To fix the HDMI issue, you need to add custom EDID, can be found in the original Config file Also MBP13,3 causes issue too, change it to MBP13,1 will help The Config file you're using now has different SSDT sorted order, change it to make the original Config

Not sure what version of Clover you're on but you should upgrade to v4380 (latest) And update or add IntelGraphicsFixup.kext to /E/C/k/Other The boot glitch is common and might not be able to fully remove 100% even with IntelGraphicsFixup.kext