Jump to content
New membership by application only, through the "Contact Us" facility

Hervé

Administrators
 View Profile  See their activity

  • Posts

    10067

  • Joined

  • Last visited

  • Days Won

    569

 Content Type 

Everything posted by Hervé

  1. Hervé
    I don't know where your DellBluetoothHCI kext is coming from, but no, that's not what I'm suggesting you use. Follow the same principles as in the tutorial I pointed to and patch the Broadcom PlugIn of the IOBluetoothFamily kext found in /S/L/E.
  2. Hervé
    You can get some pointers here: https://osxlatitude.com/index.php?/topic/2120-supportedunsupported-wireless-cards-inventory/ I can recommend the Atheros AR5B91, often found on ebay for peanuts as ex-Apple Mac.
  3. Hervé
    Your current wireless card is not supported, you'll have to replace it by a supported model. However, careful as HP uses whitelists, so you can only use those models that HP will also actually support... https://osxlatitude.com/index.php?/topic/2120-supportedunsupported-wireless-cards-inventory/ For the audio, did you try some of those Voodoo kext packs like v2.7.x or 2.8.x? For battery, Voodoo battery manager kext usually does the trick, the SmartBatteryManager too.
  4. Hervé
    Remove that Intel 4965 wireless card (or at least disable it in BIOS); it's not supported and will only cause issues which can go as far as Kernel Panics at startup. You'll need to replace that card by a supported model. Re: Ethernet, it would appear you have an Intel card as opposed to the usual Broadcom NetXtreme card for some reasons. That's why you have no Ethernet at the moment! 00:19.0 Ethernet controller [0200]: Intel Corporation 82566MM Gigabit Network Connection [8086:1049] (rev 03) You need to use the kext linked below and remove BCM5722D kext that you have in /Extra/Extensions at the moment (it is useless). Run myFix (quick) after your kexts change. http://www.osx86.net/files/file/3468-intel82566mm-32-64-bit/
  5. Hervé
    Copy the attached kexts to the folder called Extensions that you will find under Extra when you double click on your OS X disk (hence the "/Extra/Extensions" path). Then, click Go->Applications and run myHack->myFix (quick) on "/" (your current drive) to properly install the kexts on your system.
  6. Hervé
    It would be useful to specify the OS X versions you ran this on as it may affect things. For instance, it probably has no official support under Mavericks.
  7. Hervé
    I guess that'll be Win8 then, it's Ok with Win7.
  8. Hervé
    Which PlugIn kext did you patch? I'm asking because I did a quick search on the Net for the DW370 module and I get pictures of a Broadcom-based card. As such, it looks like it's not the CSR kext that needs patching (unlike for DW350 or DW360), but the Broadcom one... On looking at your attached file, I could not find any reference to product id 33110 (=0x8156 in decimal) in any Info.plist...
  9. Hervé
    Can you post the Bluetooth adapter's PCI IDs as they appear in System Report? Tuto was here and took CSR chip-based models as examples.
  10. Hervé
    No links, no, but you can post the list of kexts you have in /E/E if that's available...
  11. Hervé
    You can install Windows on GUID partitions, so no need for the MBR patch... It's a simple matter of formatting the Win partition as FAT in Mac OS Disk Utility before you proceed with Windows installation and reformatting NTFS.
  12. Hervé
    Try redoing your USB installer without the MBR patch. D630C is nVidia Quadro NVS 135M-only model, right?
  13. Hervé
    BCM5722D will not work on the D620, it's for a different model fitted to D630 for instance.
  14. Hervé
    DW1395 works for me in Mavericks, albeit on an open network (i.e. no encryption) with MAC address filtering. Basically, it's the same issue as with ML from 10.8.4, but the airportd replacement does not work with Mavericks. -> Replace with a fully supported wireless card model.
  15. Hervé
    You should avoid installing kexts in /S/L/E as much as possible. In the case of Voodoo audio, install the VoodooHDA kext in /E/E and do not forget to add the AppleHDADisabler or audio won't work. The kexts go together. Run myFix (quick) afterwards. Remember that your model is integrated in EDP and EDP system build provides more recent VoodooHDA kexts up to v2.8.4.
  16. Hervé
    The ANV/Slice kexts option should work just fine on the D830 with ML and Mav.
  17. Hervé
    Looks like there could be an issue with the default EDP options. We'll look at it and make some recommendations if things cannot be fixed rapidly. In all likelyhood, it'll be a simple matter of a missing kext and you would be able to boot off your USB installer and copy the lissing item from the USB key to the /Extra/Extensions of your HDD, then run myFix (quick) to recover. In a nutshell, same as what was detailed yesterday for the D630...
  18. Hervé
    Provided you have an nVidia D830 (the only D830 models that can properly run Mavericks), you should be able to simply proceed with a fresh install over your ML installation. That would normally preserve all apps and files that you currently have. Needless to say, make a full backup of your ML partition (a full partition image ideally) before you do anything.
  19. Hervé
    Ok, that's what I was expecting. If you get full QE/CI in ML with the GeForce 8300GS, I would have thought it would be the same in Mav, but maybe the nVidia kext needs patching for the 8300GS. Failing that, I would recommend you opt for a known supported card; there are some very cheap models like the one I use.
  20. Hervé
    Configure your BIOS setup as per recommended settings listed in the pinned thread. It looks like you have IDA enabled when your D830 is fitted with a Merom CPU.
  21. Hervé
    Thanks for this contribution. Could you provide the PCI IDs so that I add it to the list of supported USB devices? Is it 0x2001:0x3308 as indicated on Wikidevi: http://wikidevi.com/wiki/D-Link_DWA-121_rev_A1 ? This Lion driver you linked to, is it from the RealTek web site as I don't see a Mac OS driver on Dlink's site? Realtek on the other hand list drivers from Tiger 10.4 to ML 10.8: http://www.realtek.com.tw/downloads/downloadsView.aspx?Langid=1&PNid=21&PFid=48&Level=5&Conn=4&DownTypeID=3&GetDown=false&Downloads=true How about trying the ML driver?
  22. Hervé
    IOATAFamily has been ON for ages, but it's not required on our D630/D830/... Anyway, we'll fix this in the next few days & weeks.
  23. Hervé
    You cannot use the default installation guide since that ML is not normally supported on the D620... You must have noticed there is no ML bootpack for the D620 and therefore no way to proceed with the myHack & standard OSXL booptack. You need to use our special guide with a special hack called MLPF. Look for our specific guides for those unsupported systems in the EDP->Supported Models with Guides section of the forum.
  24. Hervé
    It's because the "ACPI fix" is now OFF in D630 System Build Fixes tab, when it used to be ON by default. So guys, make sure you turn it to ON when you do your EDP system builds. Folks, please note that we're working on a set of revised boot packs and revised EDP System Builds kexts and default settings. This will be gradually deployed over the next weeks.
  25. Hervé
    I've just made a brand new ML build on my D630n and the system would not boot after EDP. EDP is no longer applying the AppleACPIPlatform kext at System Build with default options and that causes it to hang at reboot... To recover, boot with USB installer, then use Terminal to copy the above kext from USB key to /Extra/Extensions on HDD. Then run myFix (quick). D630n will then boot ML properly.
×
×
  • Create New...