Bronxteck

you can rebuild edp with different trackpad options... i believe the boot back uses the debug trackpad option 2... for graphics you can change it in org.chameleon.Boot.plist set it to your native resolution 1680x1050x32 . Graphics Mode 1680x1050x322 intel wifi does not work....

best results are to extract your own and patch. but not many people know how to patch correctly.

then your sata controler is not being detected... sometimes npci=0x2000 and or PciRoot=1 helps or you have to use ioata family from 10.6.7. or dsdt has to be patched for your ich again for some reason.

ok.. alot of things going there... "PCI configuration begin" message usually means your dsdt needs patching for chipset controller... what ever yours is. that's why you need the npci=0x2000 in chame... you can try using ioatafamily from 10.6.7 in s/l/e backup your existing first. the chameleon problem sounds like you might have installed chameleon to efi at one point. and if you did then that's where you have to edit the boot.plists for them to stick. if it keeps looking for bluetooth keyboard and mouse then go into bluetooth prefpane then advanced and uncheck search at startup mouse, keyboard.... first 2 boxes. make sure there unselected. for the printer i guess check what port it's printing too i don't know why it would do that.

ok it seemes it's the ethernet card... look closely. it's showing ip adress 0.0.0.0 and it is also trying to do a debug dump to network. shut off ethernet.

just being cordial... i had another thing in mind... just kidding but seriously google is your friend when it comes to matters like this... ok here is a direct link and here is his guide it helped me get from pc to osx

will do hmm forgot to ask where is it?... lol

that windows part you mention was written by one of our forum members... when i originally got my d620 working with osx we had none of this... all we had was "leppys" boot disc and a retail cd... with that this entire forum started... so if you want a methode. use that one. its an iso you burn on windows to disk... boot from it eject it and put in your 10.6.0 retail install cd. it does not work with discs that come with macs. only retail. then you can install edp once you have a running os if you so choose sir.

on d630 i think you shut off dynamic overclock in bios. or make sure smbios is not stating the wrong speed. if no speed mentioned in smbios then thats ok as the bootloader will inject it.

if you select d630-intel it should x3100 is intel

well edp can do it for you... under fix section select touch sle

rebuild your catches.... they might still carry the corrupted fakesmc's info. also do a permissions repair with disk utility.

ok i tried it on my d620 gma 1200x800, is this intended for a higher resolution panel? it booted fine then after a while graphics and text got choppy, after a reboot i got the stripes like when testing mirror mode only fix was to replace dsdt. this was on a fresh lion install. it's like it did not read the screens edid properly.

yeah ethernet wake is an issue on that model.

yeah then remove applehda from s/l/e. and rebuild your caches

make sure to add the boot pack for your model from the wiki to thumb drive.

ok basically a boot loader just gives mac os what it needs to boot. so whatever you are going to boot from needs the boot loaders info so osx will be content that it's running from a "real mac" so you will need it for the installer and you will need it for the disk you chose to install osx to. if there's no boot loader then osx will just refuse to load and you will sit at a blank screen.

well does the iFail boot loader see your thumb drive? if so then boot the thumb drive using iatko as the boot loader. then install chame once your up and running.

google chameleon for windows

if your going to remove it then remove it from extentions folder in extra and rebuild edp with option (a) rebuild from existing

yeah you need a bootloader

well maybe you can use "leppys disc" as the boot loader or find a chameleon from cd... there where some iso's floating around the forum for some models a while ago

no real perfect alps drivers really each one has it's benefits and drawbacks, i use 4 the Anv-Slice version and bring the scrolling speed all the way to 0 in the trackpad prefpane. seem just as bad in windows

d410 is p4 cpu you probably need a kernel that supports p4 plus some gma kext or edits for gma915 graphics... edp works on machines that have similar hardware as a intel mac.

hmm weird looks like it got stuck in the middle of loading fakesmc.... is this a clean install of edp? make sure you dont have fake smc any where other than in E/E and inside 0EDP.kext in s/l/e