Syonagar

Dear pwgus, Looks like there's two version of fakesmc.kext. You need to run myfix full mode on the hard disk again. Cheers!

Dear Tengokuu, Try this. Can you copy your ApplePS2Controller.kext from /Extra to /System/Library/Extra and then run myfix full mode again. Cheers!

Dear Tengokuu, Have you try to repair permission with disk utility? Cheers!

Dear elim, Have you tried the dsdt.aml above with your machine on lion 10.7.4 and bios A18? We need you to try it out so that we can make a standard bootpack for D630 Intel High Resolution. Chers!

Dear elim, Have you tried the dsdt.aml I posted here (last post):- http://forum.osxlati...30/page__st__20 Make sure you do a fresh configuration for D630 with EDP 3.1 before that. Cheers!

Dear Tengoku, The whole /Extra folder. But make sure to backup your old /Extra to /Extra-Backup for example. Cheers!

Dear pckrull, Do you have access to another mac or hack? If yes, can you remake the usb installer using myhack 3.1? The myhack utilities should have be installed when the usb installer is created using myhack 3.1. Cheers! P/s: Noted. We'll see how to further refine and fine tune the guide.

Dear Elim, Give a try the dsdt.aml below. Its similar to mine but I changed it a bit for high resolution. Cheers! dsdt.aml.zip

Dear pckrull, You can run myHack under Utilities menu inside the installer. Use it to install the Extra in installer to hard disk and also to run myfix full mode. Cheers!

Dear pckrull, Have you installed bootpack Extra to the new os system? Use myfix to install it and after that run myfix full mode. The bootpack should get you into the new os x system to download and run EDP 3.1 on. Cheers!

Dear bped, Give it a try and let us know how it went Cheers!

Dear byped, Can you zip and post your /Extra so that other members can try it out. Offcourse, its work in progress as your Intel HD3000 and trackpad is yet to work. Maybe other members can add support for those. Cheers!

Dear savage, You can either update from Software Update and download the combo update from Apple website. Just be sure to replace the appleacpiplatform.kext and run myfix fill on the system before rebooting. Cheers!

Dear RobertB, From your os x system, run EDP, select installer and then install chameleon. It will load up the installer and then install it your os x partition. EDP 2.2 can work with 10.7.4 but you'll need to replace the appleacpiplatform.kext and run myfix full mode on the os x system before rebooting. Cheers!

Dear tengokuu, I noticed that you have another D820. Have you downloaded the latest EDP 3.1 there? If you have, you can just copy that to the E6400 and run it. EDP 3.1 has support for E6400. Cheers!

Dear elim, The latest dsdt.aml for your machine is already in EDP 3.1. Download it and copy the dsdt.aml to your /E/E folder. Further, what bios to you have? You may need to update to the latest A18 if you have not as we have tested sleep in that bios version. Cheers!

Dear Dellboy, The email which was sent out by the crew if you have not already received it:- Hi Boys and girls, Much work have been done over the last couple of days, but i'm happy to say that we have reached EDP 3.1 The "short list" * OLD database based BPG (BootPack Generator) is dead, new one (www.osxlatitude.com/packs) is based directly on the EDP 3.x SVN * EDP 1.9.x is dead, SL support migrated to EDP 3.1 * Multi OS and Multi Vendor/series/models integrated * Integrated "common" system for models, meaning a model can contain a set of common data (dsdt.aml, plists, extentions etc.) for each model, but if model have some OS specifics those can override * Integrate support for generating boot packs for the web site from EDP 3 much… much.. MUCH more... Ideas for the future: * Add "type" (eg. motherboard or laptop) to model info db * Segment model info * Integrate the new PS2db * A graphicial page for the website showing what we support.. will be automatic updated. New ideas is welcome //Leon

Dear Uloga, Try and check if there is a kext called 'IOATAFamily.kext in the /Extra/Extensions folder. If there is, try to remove it to a safe place and reboot. Cheers!

Dear RobertB, Try to reinstall chameleon from EDP on your internal hard disk. Cheers!

Dear amrab, You can have a look at our compatible dell laptop comparison here :- http://www.osxlatitude.com/compare-specs/ Cheers!

Dear pwgus, Have a read at our Installation top menu above. Its a good start. We advice that you try our method without mixing with others (e.g. iboot (chameleon, stolen and rebranded)) as if anything happens we can't help you. Cheers!

Dellboy, EDP 3.1 is now for all os x version for supported hardware Cheers!

Dear uloga, Have you tried to set you hard disk setting in bios to AHCI? Cheers!

Dear Albert, You need to download it manually from the terminal. Details available here : https://osxlatitude.com/index.php?/topic/1422-edp-30-released/ Cheers!

Dear elim, Mine sleeps pretty well. As we both have similar Extra kexts except for graphics kexts and dsdt.aml, my guest is something is wrong with your dsdt.aml. Cheers!