Jake Lo

If your model doesn't have the Nvidia card, then your graphics is the Intel 1st Gen HD Graphics and will need a patch for it to work. See here

Try this version, should fix the caps Lock issue if you're on 10.12.3. You could also switch keyboard from Ansi to ISO or vice versa in Keyboard preference.

Try this version

If you look down to vendor ID: you'll see 0x10ec0269 See if this works, seems to be similar issue with Acer

Unfortunately my Yosemite guide uses Chameleon boot loader and you can't update directly unlike Clover loader. But you can create a new Sierra / El Capitan installer and install on top. This will retain all the data and applications. Another option would be to install Clover loader on top with the latest Clover bootpack, removing any Chameleon bootpack (Extra). Then you can update directly.

Does it have an Alps or Synaptic or ElanTouch touchpad? What's the source of VoodooPS2Controller you are currently using?

DPCIManager shows it has ALC269 rather than ALC271x, you might give that a try.

Which boot argument? For battery, add ACPIBatteryManager.kext to /EFI/Clover/Kext/10.12 You can get rid of GenericUSBXHCI. It's for non Intel USB 3.0 For the sleep issue, I used Rehabman's USB3_PRW 0x6D (Instant Wake) patch since you have a Broadwell system, but this cause a compiling error. So I combined it with his Skylake patch and use Method rather than Name for _PRW

DSDT patched. DSDT.aml.zip

Try Karabiner-Elements to remap your Fn keys.

boot with verbose and do not restart on panic mode try safe mode if that still fails

Is there another option under the UEFI boot menu? Usually you'll see the Legacy option on top and UEFI option on bottom if UEFI is enabled in BIOS but with Legacy Option ROMs enabled too.

Boot to Clover, hit F4, continue booting to OSX Compress and attach the Clover folder here. I'll help you patch your files

Do you have UEFI or Legacy enabled in the BIOS? The installation setting of Clover loader is different depending on which option you set on the BIOS. For UEFI, use this setting when install Clover loader: Install for UEFI booting only Install Clover in the ESP Drivers64UEFI\OsxAptioFixDrv-64 For Legacy, use this settings: Install Clover in the ESP Bootloader/Install boot0af in MBR CloverEFI/CloverEFI 64-bits SATA

Did you install Clover on the installed HDD? Use the same config as you did on the USB installer. Copy the Clover folder from the USB installer partition to the EFI Partition of the installed HDD

@vinicius_sampaio, try this one by Mirone

See here how to create Clover boot disk, replace files from the link

I'm on A13 and have no issue. Something else is happening here for you.

Make sure DVMT is still set correctly

Downgrade Clover to v3556, then boot without cache by tapping the spacebar at the Clover GUI and select it.

Too blurred to read, but looks like the issue. Maybe re flash your BIOS.

Where did you get the source to create your USB Installer? Make sure it's downloaded clean from the AppStore and not from some distro. I'm pretty sure 'no cache mode' has been removed from the current Clover version. You might have to go back to an older version. I think v3556 still had it.

Do you have AppleIntelHD5000Graphics.kext and AppleIntelFramebufferAzul.kext in /S/L/E? Make sure they are vanilla, not touch in anyway.

10.11.4 is the 1st OS X to support Skylake so might have some issues with HD 520, I'm on 10.11.6 and not experiencing this issue. Perhaps try the combo update to latest El Capitan 10.11.6.

This is what I have in the BIOS (A13) currently Enabled: UEFI AHCI Legacy Rom Options CPU XD Lan over PXE Disabled: Secure Boot TPM Wake on LAN