Jump to content

Jake Lo

Moderators
 View Profile  See their activity

  • Posts

    14365

  • Joined

  • Last visited

  • Days Won

    868

 Content Type 

Everything posted by Jake Lo

  1. Jake Lo
    did you set the DVMT to the required 96MB? when you enable inject Intel, did you set the ig-platform-id to 0x191b0000? Do you have nv_disable=1 to disable the nvidia card, set BIOS to enable switchable graphics?
  2. Jake Lo
    no, that looks right. much easier if you just change the DVMT and never have to patch the FB ever on updates. I have no issue on my Latitude and Precision
  3. Jake Lo
    that's your choice. make sure to use the correct one for Sierra Comment: Broadwell minStolenSize patch (credit RehabMan based on original by Austere.J) Name: AppleIntelBDWGraphicsFramebuffer MatchOS: 10.12.x Find: Replace:
  4. Jake Lo
    SSDT?? You don't have one in the clover folder you attached. System don't need one to boot.
  5. Jake Lo
    Set DVMT as per the guide under prerequisite. Don't remove the ig-platform-id or change it. All should work once you have the DVMT set
  6. Jake Lo
    See here under Prerequisite
  7. Jake Lo
    Those files are old, use the Sierra pack I posted above. Your KP could be due to not having DVMT set to 96MB. By removing the ig-platform-id, you prevented graphics from loading. You can remove nv_disable if you like, it won't cause any issue with it on.
  8. Jake Lo
    Did you use the Sierra files from here?
  9. Jake Lo
    If you mean you checked it in Windows, it's not indicative of what's actually set in the BIOS. You need to check the BIOS to be sure. NO, don't use my files, use the files you currently have on your system as I posted above. Config.plist Kexts folder Driverx64UEFI
  10. Jake Lo
    Go ahead and select Load default in the BIOS. Apply it. Then go back and change SATA Operations to AHCI, enable Legacy ROM Option, and UEFI.
  11. Jake Lo
    Sure, it's been known to work for some
  12. Jake Lo
    run in terminal sudo dmesg | grep reason See what the output say
  13. Jake Lo
    You'll need the EFI Shell boot disk. Run setup_var 0x15b to see what value it outputs, same for 0x15c. If they are not 0x3, then change them. In my experience while updating BIOS, the settings stick, but I read a member here said it somehow changed due to Windows update and not a bios update. So it's better to be sure and check it.
  14. Jake Lo
    Rebuild your USB boot disk keeping the files in your Clover folder. See here for manual process Config.plist Kexts Driverx64UEFI
  15. Jake Lo
    Try adding this SATA-100-series-unsupported.kext
  16. Jake Lo
    I'm seeing 2 issues. 1) The voodoops2Controller is causing your KP, are you using the files that is in the link? 2) Your SMBIOS shows MBP8,3, it needs to be at MBP8,2. Are you using the file that is in the link?
  17. Jake Lo
    download HFSPlus.efi and place it in /EFI/Clover/Drivers64UEFI
  18. Jake Lo
    Try this Config file config.plist.zip
  19. Jake Lo
    Your graphics is causing the KP. Make sure DVMT has not been reset due to whatever reason. Check offset 0x15b and 0x15c are still set to 0x3
  20. Jake Lo
    What version of BIOS is your system? Try going into Options when you see the Clover loader, use the right arrow to navigate Select ACPI patching-> Tables Dropping-> Go all the way down and deselect Drop all OEM SSDT Check all the Drop "SSDT-xx" below that Select Return Change DSDT name: BIOS.aml Select Return, Return Hit spacebar to select Verbose mode What the above does is to not use the patched DSDT/SSDT if it's a BIOS dependent issue. If it boots with that setting, then we could try exporting new raw file and I'll repatch them for you.
  21. Jake Lo
    Reboot to Clover GUI. Hit F4. Compress and attach the Clover folder here, use the 'More Reply Options'.
  22. Jake Lo
    1/ Wifi can not working. As Bronxteck said, Intel is not supported, replace it with a DW1560 2/ Headphone has garbled/distorted. What codec does it have? What are you using for audio? Patched kexts or VoodooHDA? 3/ Keyboard Backlight auto turn-off when I hae not press any key (seems after 5-6 seconds - timeout). That's normal to save battery. It'll come back on once a key is touched
  23. Jake Lo
    With Skylake system you need to set DVMT to 96MB. Does your BIOS have the option to change? Please also list the full system specs.
  24. Jake Lo
    Disable it in the BIOS or take it out.
  25. Jake Lo
    here DSDT.aml.zip
×
×
  • Create New...