Jump to content

Jake Lo

Moderators
  • Posts

    14365
  • Joined

  • Last visited

  • Days Won

    868

Everything posted by Jake Lo

  1. Ok, remove VoodooHDA + AppleHDADisabler Replace the attached contents into /EFI/Clover Copy kexts in /EFI/Clover/kexts/Other/LE to /Library/Extensions Repair permission and rebuild cache sudo chmod -Rf 755 /L*/E* sudo chown -Rf 0:0 /L*/E* sudo touch -f /L*/E* sudo chmod -Rf 755 /S*/L*/E* sudo chown -Rf 0:0 /S*/L*/E* sudo touch -f /S*/L*/E* sudo kextcache -Boot -U / XPS_12.zip
  2. Make sure you only have 1 version of the kext in any one place. Either in /e/c/k/other or /L/E or /S/L/E run the following and post the result for review sudo chmod -Rf 755 /L*/E* sudo chown -Rf 0:0 /L*/E* sudo touch -f /L*/E* sudo chmod -Rf 755 /S*/L*/E* sudo chown -Rf 0:0 /S*/L*/E* sudo touch -f /S*/L*/E* sudo kextcache -Boot -U /
  3. Even with big RED Bold fonts, some still look pass it. I might have to revise the guide if this keeps appearing
  4. You need HFSPlus.efi in /EFI/Clover/drivers64UEFI which is included in the Generic EFI from my guide Note: Bootpack (EFI) consists of combining the Generic EFI + the model you're downloading!!! Instruction: Download the Generic EFI folder. Download model below and add the contents into the Generic /EFI/Clover folder
  5. You need to have Legacy Option ROMS enabled in the BIOS
  6. Use files from here, it was patched from your files
  7. are you sure it's the exact same error? try this config config.plist.zip
  8. where did you get the Alps kext for your Mavericks system?
  9. Looks like it doesn't have built-in ethernet Not sure what audio CodecID it has either...do you know what it is? I see in you attach you have a patched AppleHDA for ALC275, is that the correct CodecID? Does system has HDMI and DisplayPort or both?
  10. were you able to add HFSPlus.efi back and see if it'll boot to the hard drive? Don't know what EFSPlus.efi is. You can get it here if you don't have it
  11. Did you copy the Clover folder from the USB to the hard drive EFI partition? Might be your hard drive is missing the APFS.efi if you had formatted to APFS format.
  12. I updated most of the kexts and updated some hot patches from El Capitan to HS Sierra. I think it could just be VoodooPS2Controller was too old, that's the culprit. It would've Kp on Sierra too.
  13. Replace Config. This should at minimum get your full graphics acceleration. Post screenshots of Status and PCI List with DPCIManager https://sourceforge.net/projects/dpcimanager/ and Launch IOReg IORegistryExplorer_v2.1.zip Save and attached all here for review I saw you had exported the raw DSDT/SSDT. I'll try to patch for you once I have the info above. What version of BIOS are you on? config.plist.zip
  14. Try replacing files and folders into /EFI/Clover Place APFS.efi in /EFI/Clover/driver64 if you plan on converting to APFS. If you prefer to stay on HFS+, then see info from here regarding upgrading... E6x20_HS.zip
  15. See my new HS guide using Sierra bootpack from post #2 of guide with minor update to work
  16. Are you positive it has an Alps and not Synaptics touchpad?
  17. Ok, progress. Try this Config config.plist.zip
  18. Seems like an USB issue. Attach the Clover folder here for review. Use the "More Reply Options" on the lower right to attach the folder, must be compress first
  19. No, for E6x20 (SandyBridge), only works with Legacy on my Guide. Others were able to get UEFI to work, but I have not tried their process. Boot with verbose and debug 0x100 mode and post the KP
  20. I'm using all my own files for T410s. The FB didn't work either, I already tested the hotpatch for High Sierra + general patch, but not working. Think I'm missing another patch
×
×
  • Create New...