Hervé

TouchPad works fine if you can live without the buttons...

No idea. I use latest Lilu + latest AppleALC on my laptop with ALC256 (injecting layout 11) and all is Ok. This being said, if this is the only gremlin with audio, I suggest you live with it.

'better replace that DW1707 by a more suitable card...

??? If you're running full vanilla, could this be rogue leftovers from stuff you did during your efforts to get audio going? You could always try to temporarily set your Hack to a non-English language, log out or reboot, log back in or restart, then change again the English.

Install or inject CodecCommander kext. I've no idea what you mean by changing the audio PrefPane to English. As far as I know, that should run with whatever language your Hackintosh is running/setup with. Or you don't have a vanilla installation but a distro that made a mess in there.

Ok, well, you need to adjust your Clover folder. It still contains files that were specific to Franckenstein's system, such as the CPU-specific SSDT which was for his i7-4900MQ. You have a different CPU... I also see 3 x DSDT files but only the one called DSDT will be used. Try this Clover config + adjusted kexts set: config.plist.zip kexts.zip

Post a zipped copy of your Clover EFI folder (without Themes subfolder). Brief corrupt Apple logo at startup is perfectly normal and is not indicative of an issue. If a well-know little final boot stage gremlin that can easily be fixed. Please explain the problem(s) you encounter in details. "I did not succeed" is no good to us...

Try these instead. Self-explanatory. config.plist_layout_11.zip config.plist_layout_13.zip config.plist_layout_56.zip

Try this on the E7470: VoodooPS2Controller.kext.zip I think it's Rehabman's and the attachment only contains the Keyboard driver, nothing for a TrackPad/TouchPad.

Sigh... post your Clover config. Why use Xcode when you can use Clover Configurator? Last time I checked your Clover config, the audio properties were not injected properly/commented out...

How did you inject audio layout? Explain how you did this.

No issues with SDK as far as I can tell; seems more like some features are missing... Apart from the absence of support for the buttons (and TrackPoint), the TouchPad is otherwise perfectly working. I have tap to click, scroll & zoom, rotate and the various multi-finger gestures. Forces one to operate the Hack like a Mac!

Consult our Wireless card inventory in R&D->Wireless & Bluetooth section. Thank you.

Recompiled v2.1.6 code for SDK 10.14. Getting the same slow movement behaviour as with the v2.1.4 kext I was previously using and no working buttons/TouchPoint...

No success, I recompiled the entire VoodooI2C v1.2.6 code for 10.14 DSK and it does not activate any of the TouchPad buttons or the TrackPoint. Mouse movement is also not as smooth as what I obtain with that v1.2.4 version of unknown origin but 10.14 build. v2.1.6_DSK_10.14.zip This being said, it should be noted that most -if not all- gestures offered in the TouchPad PrefPane are supported. And that's pretty good !

That's what I experienced with my initial I2C kexts until I replaced them with those from James90 5590 pack and which are the same that were in the Clover pack attached to your post #1. 'currently working on recompiling the I2C kexts under Mojave 10.14.4 to try out latest version v2.1.6.

Re: audio, please refer to my previous post and what you've done... Did you install or inject the kexts as advised? Did you try the various layouts?

Weird... If I install any of those v2.1.4, v2.1.5 or v2.1.6 kexts from the Github repo, the Alps TPouchPad of my 7490 is not working at all. If I use the kexts from James90's pack, TouchPad is working. Where is his I2C kext coming from? Was it just a recompilation under Mojave of the v2.1.4 source code? Looking at the GitHub v2.1.4 pack and James90's pack, the 2 x VoodooI2CHID kexts v1.0 are the same. But when I compare the 2 x VoodooI2C kexts v2.1.4, I see no difference in the plists apart from the macOS build (10.14 in the case of James90, 10.12 in the case of the Github repo). I compared the Plugins and they're all identical, even the binary files are the same. So, apart from the macOS version the kexts appear to have been compiled on, I can see no difference, yet one works, the other does not ! Maybe I ought to recompile v2.1.5/v2.1.6 in my Mojave 10.14.4 installation. The repo does mention that v2.1.6 was built using the 10.12 SDK...

Make sure you use the latest FakeSMC v6.26-357 + latest APCIBatteryManager v1.90.1. Failing that, try VirtualSMC and its Plugins.

Clover boot screen probably does not support 4K because graphics aren't fully initialised during that phase...

VGA needs SNB ramebuffer patching as detailed in the HD3000 guide or my E6220 guide. I don't think you can get audio via the docking station jack. I'd have to check again but, from memory, it did not work. HDMI audio will only work if you patch the SNB framebuffer kext in order too inject HDMI output port type. Can't explain your random freezes; as far as I'm concerned, this is one of the best little Hackintoshes I've ever owned, especially as it's 100% working.

I initially installed Mojave on an external USB3.0 HDD in order to avoid messing with the Win10 installation that's on the built-in M.2 SATA SSD. Given that the Latitude 7490 can boot from microSD card (needs Legacy boot enabled in BIOS), I installed Clover and the 7490 pack on an old 2GB microSD card I had lying around. Card was initially reformatted FAT32. I now use it to boot Mojave from a freshly created partition on the SSD without having had to mess around with the Win10 Boot (EFI) partition. It works great.

Yes.

'found the issue: missing NoTouchID kext...

I'd be interesting to hear what you experience if you simply add a green tag to any kext in /S/L/E...