Hervé

Just verify that the proper layout-id is injected in DSDT's HDEF device but I would guess so through the bootpack.

No need to quote every message you reply to... Q6600 is of those models I mentioned as non compatible with Sierra. It's the reason why you can't boot your Sierra installer. You'd have to run your system on a Q8xxx or Q9xxx CPU for Sierra.

Please post your Clover EFI folder. Are you injecting the correct layout-id 0x0a260006 and faking desktop HD4600 on this HD4400 laptop? You may have to inject EDID too.

It would greatly help if you would post your system's specifications. You've stated you have a Core2Quad and that's not SandyBridge. Core2Duo/Core2Quad pre-date 1st gen Core "i" CPUs such as i3/i5/i7-xxxYY. SandyBridge CPUs are 2nd gen Core "i" with models such as i3/i5/i7 -2xxxYY or related Xeon & low-end CPUs. We won't be able to comment on your Clover setup and kexts unless we know what hardware you have in terms of CPU, chipset, graphics, LAN, WLAN, audio, etc. In case you still ignored this, please note that Sierra requires a CPU with SSE4 instructions set. Not all C2D/C2Q CPUs have that, only later Penryn/Yorkfield models. If your system does not meet that bare minimum, your won't even be able to boot a Sierra installer and you'll be limited to El Capitan at best (until you swap CPU with a Sierra-compatible model, if feasible). For instance, Kenstfield Q6xxx CPUs are no go for Sierra. So, let's start at the beginning... NB: no trace of nVidia injection in any of your posted Clover configs.

Usual IDT 92HD93 codec of the Latitude E6x30 series in this laptop so use the usual AppleHDA patching method: install the dummy kext to /Library/Extensions, repair permissions and rebuild your cache (details available here) apply the AppleHDA kext on-the-fly patches (details of the find/replace bytes available here)

I have BT4.0 DW380 in my E6230 + some DW1510 cards available. I'll have to try them out again but I don't think these will be sufficient to give you full airdrop + handoff. I'm pretty sure I tried before but they would not give me the desired services. Personally, I disabled my DW380 in BIOS and went for an Apple BCM94360CD + adapter board in my E62x0 laptops and everything works natively.

As detailed here, Haswell Intel HD Graphics of 4th gen non "i" series CPUs such Pentium or other Celeron is not supported. There's no workaround. Unless you can change your CPU to an i3/i5/i7 with Intel HD 4200/4400/4600/etc. graphics, I'm afraid your laptop is not suitable for Hackintoshing purposes.

"About us" menu or bottom right corner of the web page:

Which GPU did you go for? Remember that Hackintoshes do not support dual GPU switching... So, it's either the nVIdIA dGPU or the Intel iGPU, the latter having more chances to work than the former.

Guys, please consult the FAQ section of the forum before posting,g. Thanks.

NVRAM.plist... Tried to remove that before you boot your USB installer?

It's got be your USB installer that contains something wrong from the very beginning then. Watch what you copy as a bootpack...

Strange that the OS is asking for the password after every single sudo command. I'm used to password at the 1st command only, not the subsequent ones...

Describe: "the machine can´t read the hdd, loading starts, but nothing happens." Right now, it seems the bootloader is not installed or configured properly.

I can only suggest that you: make a low-level reformatting of your USB drive (so as to wipe out absolutely everything on it) take out your internal SSD, currently setup with Sierra

It seems Qualcomm Atheros module 0cf3:e300 is not in the list of supported devices on p1...

You're gonna have to give us a little more substance than that. Like how your system is configured and so on... Meantime: https://osxlatitude.com/index.php?/topic/9297-dell-inspiron-n5010-os-x-install/&do=findComment&comment=63336

Disable the on-board BT in BIOS.

VENdor id & DEVice id: official identifiers of computer hardware... Will be listed under SysProfiler->Bluetooth section and/or SysProfiler->USB section. Example:

Here, you'll find an up-to-date list of the most compatible laptops that run macOS perfectly. As Jake answered in post #2, "we don't have a section" for your initial query. The closest thing we have to that is the list of compatible systems available off the EDP (Beta) menu at the top of your screen. Answers to your latest questions about instructions, bootpacks and so on are already available in the forum Guides section. And those evolve day by day, week by week, month by month. You could use that section to make a list of Hackintosheable laptops and assess level of compatibility. Most of the guides clearly state what works and what does not. I know... chores and homework...

You should consider that guide obsolete, that's why it's in the archived section. If you're using Clover, you're probably injecting kexts, in which case make sure you've copied the same kexts on your HDD (and it's Clover EFI partition if applicable) as found on your USB key. There are better guides these days: https://osxlatitude.com/index.php?/topic/7478-dell-latitude-e6xxxe7xxx-yosemite-install-guide/ https://osxlatitude.com/index.php?/topic/8506-dell-latitude-inspiron-precision-clover-guide/ this one is for the E6220 but the genral principles remain (just adapt the bootpack to E6240 DSDT and screen res if applicable) )https://osxlatitude.com/index.php?/topic/7914-dell-latitude-e6220-with-i5-2520m-hd3000-and-1366x768-lcd-mavericksyosemiteel-capitansierra/

There are many threads about dual booting in the related multiple boot/bootloader sections. Have a browse through. Obviously, no need for a Win partition to install OS X/macOS or create their associated partition(s). Let's close this thread.

If we could stick to the topic "ssd m..2 not showing" in this thread...

That'll depend on what you're trying to do...

Chameleon/Enoch boot options & flags can be listed through the historical "?" command if you enter it at the bootlaoder prompt. Boot option Wait=Yes will stop the boot processbefore loading the kernel. You will see a summary listing tables that loaded. By default, Chameleon/Enoch loads SSDT.aml (or ssdt.aml) from /Extra folder if present. It's just the same as for the DSDT. Pike R Alpha's ssdt generartor script creates a file carrying that file name, so it can be used "as is". If you use a different file name, you'll have to manually specify that at the bootprompt or in the o.c.B.plist. In other words, it's the same old way it's always been for the last 8 or 9 years, if not more. Google is your friend, you can use it to learn about Chameleon flags and options... http://chameleon.osx86.hu/