Hervé

It's the fact that you're using a distro (iFail) without a specific DSDT for your D830. Boot it with video output on an external screen (press Fn-F8 right at the very beginning) and I bet that display would revert to built-in LCD at switch to desktop. You should use our bootpack and proceed with a Vanilla Mac OS X installation with myHack, then follow with EDP tuning, i.e. the OSXL procedure. Look up for the documentation in our EDP pages on the web site. Please note that GM965 is the chipset that all D830 have. By default, this chipset includes GMA X3100 graphics which, I assume, is your case. Some D830 have discrete add-on nVidia graphics (NVS 135M/NVS 140M) instead, which are much better. When you use our bootpack, make sure to pick up the one with correct graphics chip + screen resolution that matches your LCD (the DSDT slightly differs) in the case of X3100 graphics.

Try and use the /Extra from your previous Lion installation as boot pack. I would not use the DSDT of a given computer on another one, unless it is really identical hardware wise; this is not entirely the case between D630 and Inspiron 1525.

When you say you have no NIC, I assume you're talking about the on-board 10/100Mb Ethernet port. You should use our bootpack as it contains the kext for the on-board LAN: check your /Extra/Extensions folder and it should contain something like BCM5722D.kext If it does not, that would explain your issue.

Sometimes, you have to go to the audio pref pane and manually select the analog output; then, let there be sound!

Hi, what's in your /Extra folder? Did you try boot options such as npci=0x2000 or PciRoot=1 or -x ? This laptop runs on GMA X3100 graphics which is not supported by ML. As such, you have no native graphics support, except if you apply MLPF hack on that installation. You can have a look for details in the various guides I've published in the relevant section, especially those for D630 X3100 and D620 nVidia.

Hi, A few questions: which BIOS version is your D620 running? did you configure the BIOS as per recommended settings? do you have an Intel wireless card? If so, disabled it or take it out as it's unsupported and it'll need to be replaced what does the KP show?

I guess it depends on the model/brand of SSD; they're not all equal.

EDP provides other battery management kexts if required. Look in /Extra/storage/kexts/battery

You need that one: http://store.apple.com/us/product/MC573Z/A/mac-os-x-106-snow-leopard

You'll notice the injected device properties in Jake's Chameleon boot plist. That may not suit your own HD4000, so you should try one of the other device properties lines that can be used. It depends entirely on your particular hardware. PS: stick to Chameleon, you'll get better support here.

Which Chameleon version are you using? You need a version that supports HD4000 (i.e. where it's been injected) and then maybe inject device properties in your boot plist. I've no experience with HD4000, but I found it did not use to be supported by Mac OS X until some time last year. I'm sure experts will reply here soon, but you can start by reading these pages to get more information: Intel HD4000 QE/CI Acceleration http://www.nikvdp.com/technotes/hackintosh-customac-getting-a-ga-h77-ds3h-with-intel-i7-3770-working-not-as-easy-as-one-would-expect/

What are your Chameleon boot plist parameters? Are they similar on HDD or USB key?

Isn't numeric keypad handled by keyboard selection in Language & Text Pref Pane->input sources, where you can select numerical, extended or PC keyboard? You can also get better keyboard support by using the layouts provided in a tool called Ukelele. That Calc button would normally have a soft key attached to it. Unless you can program it like in Windows, I doubt it'll work natively... Unless tools such as DoubleCommand support it.

Is hibernation mode set to 0 ? Check with Terminal command: sudo pmset -g

No, custom BIOS will not resolve this. Custom BIOSes only bring Apple logo at power on and include tune-up DSDT which removes the need for the DSDT file in /Extra. Configure your BIOS as per recommended settings. Once you've done your EDP System Build, you should also apply the Sleep/Hibernate fix that's provided by EDP. Alternatively, check your Hibernate mode with Terminal command: sudo pmset -g If set to any value other than 0, change it with: sudo pmset hibernatemode 0 That basically disables sleepimages on the HDD (which cause issues) and the laptop will only sleep to RAM.

The extracted DSDTs will be the same, but in Chameleon Wizard, you can only extract it when booted without a specific DSDT... I can't give you a guide about patching DSDT and if you don't know about it, I think you should forget about trying it yourself. This is really for experts...

Well, it looks like it does not like the SDHC kext, doesn't it? Try and boot in single user mode and remove the offending kext. There's a detailed tutorial to do this in the Web site articles section (use button at the top of the browser page).

You can extract your DSDT by following the process detailed here: https://osxlatitude.com/index.php?/topic/1945-dsdtssdt-patching/ If you do not have any right now, you can also extract it through the Chameleon Wizard tool.

By retail I meant a version for installation from scratch.The message you posted about your SL attempt was what typically happens with a recovery CD/DVD or one from a Mac. I don't understand your repeated failures at all. You seem to have the right CPU, you say you have retail Mac OS X installation apps, so provided your BIOS is configured as per recommended settings and you follow our installation procedure, I see no reason why it wouldn't work. Try a different key or an external HDD maybe for myHack installer; that's all I can think of now.

Can you be more specific? What kexts did you remove? Can you boot normally now?

There's no bootpack or EDP System Build for your machine, correct. As such, we have to start from scratch on that model. Maybe we'll need to extract a DSDT file from Windows too... Look here for details: https://osxlatitude.com/index.php?/topic/1945-dsdtssdt-patching/ Regarding the RTL kext, I'd check which version might exist by default in /System/Library/Extensions/IONetworkingFamily.kext (right click on the kext, select "Show Package Contents" and browse to Contents/PlugIns subfolder. Right click on the RTL8169 kext and select "GetInfo"). The kext attached above is v2.0.6. If you still get KP with either, I'd try to remove all instances of the RTL kext...

myHack used to support installation on MBR partitions/disks, but I believe this could no longer be the case. However, I've not tried that for a long time as I only use GTP formatted disks (on which I can still install Windows if necessary) BUT you may notice that myHack prompts you for a MBR-support mod towards the end. Give that a try... Do you want this because you have an existing Win installation that you wish to keep? An alternative would be to install OS X on an external (USB) disk: either a separate unit or, if it's big enough, a 2nd partition of your USB key...

For the guide, look up the documentation in EDP pages (click on EDP tab at top of your page). Basically, using a Mac or an existing Hackintosh: download and install myHack create your 10.6/10.7/10.8/10.9 installer when prompted for your Mac OS software, click browse manually and point to your downloaded installation app or InstallESD image upon completion, re-run myHack and select Create Extra; if you don't have a bootpack (I don't think we've got one for your machine), use the generic offer if you use myHack 3.1.2, you're ready to go, if you use myHack 3.2Betax, you need to install Chameleon v2248 or above to your USB installer. Chameleon v2255 installation package is available off osx86.net (http://www.osx86.net/view/4069-chameleon_v2.2_svn_r2255.html), otherwise, use Chameleon Wizard to update your USB installer partition. try your Mac OS X installation (I don't believe you'll manage to install on an MBR partition though, I recommend you format GPT) If you still have KP, then we'll need to work on it, but as I said above, Realtek have not released any driver since SL; try it anyway (copy the attached kext in /Extra/Extensions of your USB installer then run myHack->myFix (full) on the installer) and if that does not work, disable your LAN card in the BIOS if it's possible. You'll then need a supported (non-Intel) Wireless card to get network connectivity. AppleRTL8169Ethernet.kext.zip

We don't support Uni-B**t/Mutli-B***t here, that has its own web site as you know it by now. We only support OSXL procedure, based on myHack.

You need a retail version of Snow Leopard: 10.6.0 or 10.6.3. I believe Apple's final release 10.6.8 should also be available as a retail version as Apple re-offered it through AppStore for download a few months back.