Jake Lo

Make sure you disable in BIOS Wake on LAN Wake on WLAN Wake on USB

yes it would

No seeing any issue from your files. Try removing Whatevergreen.kext

No need to re patch if you made no changes in the BIOS. This issue lies somewhere else. Post debug file

What error are you encountering on the 2nd reboot?

Launcher Clover installer, click customized to select the USB Drive, then continue with the install with the following settings Install for UEFI booting only Install Clover in the ESP Drivers64UEFI\DataHubDxe-64 Drivers64UEFI\FSInject-64 Drivers64UEFI\SMCHelper-64 Drivers64UEFI\ApfsDriverLoader-64 Drivers64UEFI\AptioMemoryFix-64 Drivers64UEFI\PartitionDxe-64

Here you go, goes into /EFI/Clover/ACPI/Patched DSDT.aml.zip

Is this EFI partition or EFI folder within EFI folder? Should be EFI folder in EFI partition if the latter, install clover over. Boot files should remain unchanged.

@lmkyxx Boot to Clover GUI, press F4 on the keyboard. Continue booting to OSX Mount EFI partition. Compress and attach /EFI/Clover/ACPI/Origin folder here I'll patch the files for you. The auto sleep issue usually caused by using patched files from another system.

@Watermelon Jello Your Clover folder is missing a few folders. ie Themes, drivers64UEFI, Tools...etc Either reinstall Clover or add them with this

Please post system specs especially audio codec and graphics if you want help for those. Attach the Clover folder as well.

Wrong SSDT. Not for your CPU, remove it. Also the AMD discrete card needs to be disable via SSDT/DSDT patching Here, replace the Config file and add the SSDT*.aml to /EFI/Clover/ACPI/Patched and remove the SSDT.aml DisableAMD.zip

No hope for Intel As for dongle, just read the thread I linked above. It has a few working USB dongle but might cause sleep issue or not waking from sleep.

Look in the BIOS Use app like DPCIManager.app Have you look at that thread I linked?

Hmm, you might have to set DVMT Usually fakeID would get you pass the install but it seems it's not working for you. Are you connecting using DP or HDMI? https://osxlatitude.com/forums/topic/10549-how-to-change-dvmt-for-dell-system/?do=findComment&comment=79231

It would be easier to help you if we know what wifi it has.... If it's an Intel, forget it, it's not supported. See here for a list of supported/ unsupported cards. Personally, I have DW1560 working quite well.

try this config config.plist.zip

Make sure you have BIOS set to load defaults, apply and then go back and set it to UEFI AHCI Legacy Option ROMs off Secure Boot off CPU XD support enabled

Try this, files goes into /EFI/Clover replacing the old 3558_Mojave.zip

Replace this into /EFI/Clover

Did you install Clover boot loader? See clover guide Did you use a bootpack? Post the Clover folder you're using

https://www.dell.com/community/Laptops-General-Read-Only/Pre-boot-system-assessment-started-automatically/td-p/3625606

post debug file

yes, whatever files you're using that causes the above error Make sure you set BIOS to load Defaults, apply and then set BIOS to UEFI, AHCI, Legacy Option ROMs enable, and Disable Secure boot

That's normal in Hackintosh for those brief seconds. Lilu.kext + Whatevergreen will remove some but not 100%. If you boot with verbose mode, you won't see it, so take your pick.