Jake Lo

All the patcher does for audio is add in the layout-id, it's an incomplete Config file. If you have that on the current Config, then you won't need it. Post new debug file

@kanarienvogel Replace files into /EFI/Clover Remove these from /L/E that your installed above, repair permissions and rebuild cache AirportBrcmFixup.kext FakePCIID_Broadcom_WiFi.kext FakePCIID.kext Lilu.kext No DSDT patching needed. If you still have issue after that, then post debug file Make sure you really do have a DW1560 and not some fake

Topic has already been covered. Read from here to here

8086:160C Name: Broadwell-U Audio Controller <--HDMI Audio Try removing AppleALC.kext from /L/E. You already have Lilu & AppleALC in Clover kexts/Other. Make sure you have vanilla AppleHDA.kext in /S/L/E Repair permissions and rebuild cache

If you're upgrading, you'll need to remove AppleBacklightInjector.kext from /L/E, repair permissions and rebuild cache Post debug file

Ok, looks like A17 for AIO is the same fixes for A22 for the Tower/SFF A19 has the same fixes as A24 for Tower/SFF and so forth... Does it has an external HDMI connection? Can you plug that in as secondary and see it that work with sleep /wake? Can you post new output with the new file? log show --style syslog | fgrep "Wake reason"

What version BIOS are you running? Try A22

Crashed?? Overheated? Check fan to see if it's thoroughly cleaned.

check vendor and product ID Use DPCIManager.app and post screenshot of PCI List

Lilu.kext + AirportBrcmFixup.kext FakePCIID.kext + FakePCIID_Broadcom_WiFi.kext

post debug files

Give this a try, replace the Config file Place all the *.aml in /EFI/Clover/ACPI/Patched In the BIOS, disable Wake on LAN 9020AIO.zip

Remove the SSDT-PNLF.aml and kext since they are not working. I read another Dell AIO has sleep /wake working with Darkwake=2 Give that a try, if still not working and waking instantly, then run the following in terminal and post output log show --style syslog | fgrep "Wake reason"

Yes, replace FakePCIID with WEG Try this Config, converted the patches for WEG config.plist.zip

Delete kext/Other Rename kext/10.13 to Other Remove AppleIntelE1000e.kext, GenericUSBXHCI.kext Rename SSDT.aml to SSDT-PNLF.aml Generate new SSDT.aml with SSDTPrGen.sh, place into /EFi/Clover/ACPI/Patched

Take a look at my bootpack here. You need to patch the FB for port #5 https://osxlatitude.com/forums/topic/6472-dell-latitude-e7240e7440/?do=findComment&amp;comment=86943

try this from terminal sudo nvram -c

1) Don't need DSDT, that's why I didn't include it 2) How do you disable in Config? nv_disable=1? NOT enough, either disable in BIOS, with DSDT Patching or remove it 3) If you encounter FB error during boot, either set DVMT in BIOS or use FakeID 4) Update / not Update bios, your choice

Dude, did you missed this? https://osxlatitude.com/forums/topic/11219-optiplex-7040-mojave-install-help/?do=findComment&amp;comment=87466

Basically the same.

Hmm, I wonder if AIO works like a laptop? Give this a try. Add SSDT-PNLF.aml to /EFI/Clover/ACPI/Patched Add the Fixup.kext to /EFI/Clover/kexts/Other Reboot Since I don't know if this works, I don't know what the key combo to dim or raise brightness. You'll have to experiment a bit. brightness.zip

Here, replace into /EFI/Clover You might have to install with FakeID for IntelGFX 0x12345678 After installation, build cache and then you should be able to boot without the fakeID. You can set it in Clover Option during boot. FYI, system sleeps fine, but won't display won't wake and will require cold reboot. No solution so far 7040_Mojave.zip

Describe the issue with sleep. It'll sleep but won't wake? According to my Clover guide for 9020, you need Legacy Option ROMs enabled in the BIOS and Darkwake=No in Config file With those 2 settings, sleep / wakes on Sierra and Mojave, but not High Sierra.

Try this, files goes into /EFI/Clover replacing them 5558_HD5500_Only.zip

@theandrewgordon Let's move the conversation over here. Since yours is an AIO, it's a little different https://osxlatitude.com/forums/topic/11218-help-optiplex-9020-aio/ Post a new debug file there.