Jake Lo

Files look fine.

Download this and run permission.sh from the terminal sudo permission.sh

sudo chmod -Rf 755 /L*/E* sudo chown -Rf 0:0 /L*/E* sudo touch -f /L*/E* sudo kextcache -Boot -U /

So you're saying that with Apfsdriversloader.efi added, you don't get the Clover GUI? With Legacy Option ROMs enabled, you'll get 2 sets of boot options: Legacy and UEFI Make sure you select the USB under UEFI

Make sure you have memory in the 1st slot if you only have 1 stick.

then try abm_firstpolldelay=20000

Remove OsxAptioFix2Drv-64.efi, you already have AptioMemoryFix.efi ( they are mutually exclusive) in /EFI/Clover/drivers64UEFI. Seems all the drivers have different dates. Why not just install latest Clover v4844

add to boot arg abm_firstpolldelay=16000

You're running version .2.6.3 Go ahead and update CodecCommander to latest version 2.7.1 and try again.

Try rebuilding kextcache again. run in terminal to check if CodecCommander is working properly log show | grep CodecCommander

Post screenshot of the issue

what error did you receive? Boot to BIOS, select load Default, apply. Then go back and set it to UEFI AHCI Legacy Option ROMs enabled Secure Boot disabled Try again. Post screenshot of error Not very helpful without more detail of your issue

try with these, then post new IOReg with displays connected -cdfon -igfxnohdmi

Replace attached files into /EFI/Clover 3558_Mojave.zip

Try this Config.plist Post your Clover folder if you need further assistance

Try booting with -igfxnohdmi See here for more boot options

Can you post new IOReg file with USB-C DP monitor and HDMI monitor connected?

Remove USBPorts-Exx50.kext since you now have a new USBPort.kext What are these kexts for? daspi.kext FTDIKext.kext intelhaxm.kext SiLabsUSBDriver64.kext ProlificUsbSerial.kext usbserial.kext See here under Post Install to set the Fn keys for Brightness control The kexts in my files for Touchpad has generic functions only. You'll have 2 fingers scrolling, 2 fingers right click, and click to drag. The latest kexts for Alps touchpad right now for this model is not good and jumpy.Try it if you like

I assumed you know how to install since you already have El Capitan installed, you just have to update your kexts and Clover loader as I stated. You can follow above guide if you're using Clover.

Post debug file

You'll need to rebuild the USBPort.kext. See here

Highest you can install for SandyBridge is HighSierra. Mojave dropped support to HD3000. Other was able to install Mojave but requires using old files from High Sierra. You can update your files prior to upgrading like Clover loader and kexts to the most recent.

@Fritz00 Just enable Legacy Option ROMs in the BIOS will fix that.

please post debug file

You forgot to add HFSPlus.efi to /EFI/Clover/drivers64UEFI with my files