Jake Lo

9020 AIO thread

The DSDT/SSDT in your ACPI/Patched folder shows Haswell, but your Config shows Broadwell. Where did you get these files combo? The KP refers to your graphics card. I see your Config has the DVMT Preallocation patch so it's probably caching issue. Boot with FakeID for IntelGfx. Once installation is done, rebuild cache. That should fix the issue. At Clover, go to the Option menu. Look for graphics section, go down to FakeID and change it to 0x12345678

Did you try the files I linked for Mojave? They go into /EFI/Clover replacing your files, not merge. Make a backup of your files if you like: ACPI folder, kexts folder and Config.plist

Don't need DSDT.aml, remove it. In /EFI/Clover/drivers64UEF, remove these OsxAptioFix3Drv-64.efi apfs.efi

That is from fixing FaceTime or new install? Need more info

Try removing all the sensor kexts, keeping only FakeSMC

Try this one, use SMBIOS mbp11,1 USBPorts-E6540.kext.zip

Post debug file

Try 14,1 first and see

check out this thread

Generic EFI + Bootpack goes into /EFI/Clover = Complete EFI for 9020 If you have the tower version, replace USBPortx.kext and SMBIOS to iMac14,1 or change info.plist inside USBPort kext to iMac15,1

No need to re-apply _wak arg0 v2 nor Brightness patch. As you can see, your modded DSDT now has 2 wake patches because it was applied already. Brightness patch is already included with SSDT-PNLF.aml. Reason brightness slider was not working could be because I forgot to add it to the sortedOrder in the Config file. Add that and slider should work and sleep should be fix. Reason USB is not working on your DSDT is because you applied Rehabman's 7-series USB 3 Multiplex instead of 7-series/8-series USB.

I don't own any CoffeeLake system, so can't compare. Have you tried switching and see any difference?

same

did you try the files I posted here? Goes into /EFI/Clover

It's an auto sensing issue. No, there's no other kext other than voodooHDA. You can ask InsanelyDeepak to help fix the kext here.

Looks like you're using Clover so it's easy. Open your Config file with Clover Configurator Next to ACPI / Patches, click on the List of Patches drop down and add the 1st 2 patches You should also manually add this since it's not listed for EHCI to EH01 Copy the patch for EHC1 and change it to EHCI EHCI = 4548 4349

Try renaming EHCI and EHC2 to EHO1 and EH02 respectively and add FakePCIID.kext + FakePCIID_XHCIMux.kext

I have the SFF model, perhaps it has less USB ports than the tower.

With Headphone plugged in, place system to sleep, then wake it up. Audio should switch over to Headphone

USB port limit patch no longer works on 10.14.1 and up. Try adding this kext to /EFI/Clover/kexts/Other If that still fails, then you'll need to generate your own USBPort.kext from 10.13.x and use it on Mojave. See here USB_Injector-E6440.kext.zip

Add to boot arg abm_firstpolldelay=16000 Increase the number is it's still not working

Please provide the IOReg file, screenshots in this case are not very useful

If you look at the link I provided, you'll see it's listed under the unsupported section. You'll need to replace it. Follow the link I provided to upload the debug file

Can you boot and then dock the system? Try with only DP port, then add DVI Try with DVI, then add DP Please post IOReg file using IORegistryExplorer with monitors connected even though blank screen. Can find app here