Jake Lo

If it's anything similar to my E7470, you need to close the laptop so that the external monitor becomes primary. Then open the lid, the LCD will switch back to primary and the external becomes secondary. See here

Mojave Mojave Guide Bootpacks - HD5500 Only Add this to /EFI/Clover replacing the old Exx50_Mojave.zip FYI, kexts in bootpack is outdated Make sure to 1st upgrade kexts found under /EFI/CLOVER/kexts/Other if you encounter issue Common links for new kexts: https://github.com/vit9696/Lilu/releases https://github.com/vit9696/Lilu/blob/master/KnownPlugins.md https://bitbucket.org/RehabMan/ - For Discrete Model Also add this to /EFI/Clover/ACPI/Patched SSDT-Disable-DGPU.aml.zip Follow Post Install above under Sierra Guide UPDATES

Mojave Mojave Guide Bootpacks Replace into /EFI/Clover after you install Clover E7470_Mojave.zip FYI, kexts in bootpack is outdated Make sure to 1st upgrade kexts found under /EFI/CLOVER/kexts/Other if you encounter issue Common links for new kexts: https://github.com/vit9696/Lilu/releases https://github.com/vit9696/Lilu/blob/master/KnownPlugins.md https://bitbucket.org/RehabMan/ Note: 1) Post Install: Copy kexts in /EFI/Clover/kexts/Other/CopyToLE to /Library/Extensions. Repair permissions and rebuild cache 2) Enable this patch in Config.plist under KextsToPatch if you have: LiteOn, Plextor, or Hynix NVMe Hynix NVMe patch 10.13.x (Bit swap block size 0x10) -Syscl UPDATES

Remove EmuVariableUefi-64.efi from /EFI/Clover/drivers64UEFI If still failed, try replacing files to /EFI/Clover with the attached Prodesk 600 G2.zip

post debug file

why would you want to change the scrolling direction? anyway, you can by selecting mouse instead of trackpad, and enable "Scroll direction: Natural". As for SD Card, there's development but since had stopped for awhile now. https://www.insanelymac.com/forum/topic/321080-sineteks-driver-for-realtek-rtsx-sdhc-card-readers/

Give this a try, replace into /EFI/Clover E6440_HD4600_HotPatch.zip Add this to /EFI/Clover/ACPI/Patched if you have Discrete card https://osxlatitude.com/applications/core/interface/file/attachment.php?id=20824

Need to add VoodooI2C.kext + VoodooI2CHID.kext to /EFI/Clover/kexts/Other

1) USB drive is not powering up, should work if drive is internal 2) add to boot arg abm_firstpolldelay=16000 3) Latitude theme lacked the icons for Mojave, replace theme in config file. you can find new ones in my generic EFI folder

Go ahead and enable USB 3.0 in the BIOS. Works just fine

You should post your system's specs. Your DSDT/SSDT shows you have AMD discrete graphics as well. 1st off, you need to upgrade Clover to the latest 2nd, AptioMemoryFix-64.efi and OsxAptioFix2Drv-64.efi are mutually exclusive. Remove OsxAptioFix2Drv-64.efi Install Clover with the following settings Install for UEFI booting only Install Clover in the ESP Drivers64UEFI\DataHubDxe-64 Drivers64UEFI\FSInject-64 Drivers64UEFI\SMCHelper-64 Drivers64UEFI\ApfsDriverLoader-64 Drivers64UEFI\AptioMemoryFix-64 Drivers64UEFI\PartitionDxe-64 Install Clover Preference Pane Backup and the replace these into /EFI/Clover 3470_Mojave.zip

That's what we used at the beginning with same results. Injection is in Properties under Devices with WEG

Yeah, I already added the patch to the Config, but didn't work according to @augustopaulo

You can leave both SSDT-8 and SSDT-9 off Both preferably extract new file and get them patched. Boot to Clover, press F4. Then compress and attach the Clover folder here

Try replacing with this one, compiled for Mojave. https://osxlatitude.com/forums/topic/8285-refined-alps-touchpad-driver/?do=findComment&comment=85971

Replace contents into /EFI/Clover If you still encounter graphics glitch then you might consider upgrading MacOS to at least 10.13.6 5580_HD520_HotPatch2.zip

Fn+F3 and Fn+Insert to control Brightness

I see the issue, looks like using DSDT/SSDT from another system even though same model, your files are very different. Try this, backup and replace the following into /EFI/Clover Config.plist and ACPI folder 5580_HD520_HotPatch.zip

I see IntelMausiEthernet.kext and AppleIntelE1000e.kext showing up in the kextcache and getting error. Remove both of them from /S/L/E and/or /L/E Repair permissions and rebuild cache Reboot and post new debug files

change back to MBP13,1 and add to boot arg -no_compat_check Can you confirm it has a build-in ethernet and what model? I see IntelMausiEthernet.kext and AppleIntelE1000e.kext showing up in the kextcache and getting error. Remove both of them from /S/L/E and /L/E Repair permissions and rebuild cache

check BIOS, make sure Legacy Option ROMS is disabled. Check that LAN is enabled Missing IOReg from the debug, please attach

Give this a try, replace contents into /EFI/Clover Make sure you're running the latest Clover 7280_HD620.zip

You need to reboot with the USB installer and then select "Install macOS from <name of your SSD>", take a couple of reboot before installation completes. Check Clover option to see if FixHeaders is enabled as well

@#tamara Is your model Skylake or Kabylake?

His 5580 probably has Kabylake CPU and yours is Skylake. I'll make some changes and see if it works for you. Give this a try, replace the attached contents into /EFI/Clover and reboot 5580_HD520.zip