Jake Lo

Please post IOReg file using IORegistryExplorer.app v2.1. It's free to download

You can use the device\properties settings from this post

post entire EFI folder to determine the boot issue

Replace with this DSDT, post new IOReg file if it boots DSDT.aml.zip

Just change your SMBIOS to MacBookPro11,4 If you have an USBPorts.kext, that should be hardcoded to MacBookPro11,1, change the info.plist file to MacBookPro11,4 That's it, but of course you should update all your kexts with latest version and OC.

Your wifi according to the IOReg file is a Qualcom QCNFA344A and it's not supported. It's not an Intel as you have stated in the OP. Replace it with an Intel if you want some support with the newly developed AirportItlwm.kext but still in Beta status or go with a supported Broadcom card like DW1560/DW1830/DW1820A

your touchscreen is neither I2C nor USB, so you might have to use a 3rd party app like UPDD https://www.touch-base.com/

use MacBookPro11,4 should be enough to get you on Monterey.

replace BTinjector kext with BlueToolFixup.kext, re-enabled the rest

@TechAndrew Give this a try, updated to 0.7.7 Removed / disabled some unnecessary kexts EFI.zip

Remove the # infront of the #PciRoot(0x0)/Pci(0x1c,0x0)/Pci(0x0,0x0) in the config and try again.

Upgrade OC to latest version and the kexts Disable IntelBluetoothInjector.kext and replace it with BlueToolFixup.kext

Try adding HDMIAudio.kext HDMIAudio.kext.zip

Ok been using this most of the day, sleep / wake system, no issue so far. This could possibly been fixed. Great job!!! alps-working.log.zip

Here's 3 logs working before sleep working after sleep and stopped working randomly Alps_logs.zip

Update to OC 0.7.7 and updated Lilu + AppleALC + Whatevergreen to the latest The version seems to be working well. Sleep / Wake continues working. Running for an hour or so and then unfortunately it stopped again. Can't see what triggers it. Was just doing basic moves and scrolling, scrolling and zoom in and out. Trackstick continues working, no issue there. alps.log.zip unlike previously, the mouse are now stuck to the top instead of the bottom

What version of Clover?

what version were you updated from? post the config.plist

@quynkk5 Try resetting NVRam

Yay! middle button now works for scrolling. The track stick speed is almost perfect. I said almost because sometimes it overshoots the target but workable. Is there a way to enable Inertia? Ok, here's the log for the touchpad issue, hope you will able to find the issue. The touchpad will stop moving up and down and only go side to side. Looking at Fingermgmt.app, the mouse always stick to the bottom, both fingers or 3. alps.log.zip

thanks @skyrilhd Big improvement since I 1st started the v8 testing, here's some issue I noticed 1) Trackstick works but tracking speed is a little fast and the middle button doesn't work for scrolling Tried lowering the speed of the track stick but that made the touchpad speed really slow. 2) Touchpad works for about 15 mins or so and then it'll only go side to side and swiping. It won't go up or down ctrl+alt+prtscr doesn't seem make any difference Sleep / Wake - makes no difference Let me know what files you need and I'll attach them e7470.ioreg.zip

Install Airportitlwm.kext for Big Sur. https://openintelwireless.github.io/itlwm/Compat.html#dvm-iwn

@mrpie Are you sure your touchpad is Alps? Dragging can be set at Accessibility/Pointer Control

Looks like it's no longer supported in Monterey /!\ Monterey 12.x does not support patches/workarounds for dropped cards such as Atheros or Broadcom BCM4322. Such cards have to be replaced by models supported in Monterey. Replace with DW1550 should work. Wifi / BT combo

Try replacing VoodooHDA with AppleALC.kext using layout-id = 3