Jake Lo

Try the Config and DSDT.aml config.plist DSDT.aml

NOT WORKING [Dell M6800 - High Sierra 10.13.4] Headphone Jack (Excessive Static) Did you follow my post above to fix the static noise for headphone?

No, touchscreen has not affect. Try Fn+F12, see if it's just brightness too low

Disable the EDID injection and boot with the previous steps again.

Did you disable EDID injection too?

@lemo1029 SSDT-Disable_DGPU.aml only spoofs the Nvidia card so you can install HS but not disabled. That could be the reason of your Battery life issue. Try replace it with this SSDT-8-INSYDE.aml (disabled Nvidia) and enable AutoMerge in the Config file SSDT-8-INSYDE.aml

1) Sleep / Wake EDID issue, see here 2) Wifi Replace to Broadcom BCM94352Z What Wifi device does your system have? Intel Wifi is NOT supported

New 10.13.4 USB port limit patch added config.plist

No need to rebuild installer, just install Clover over existing installer. All it does is update the loader files in the EFI partition.

Try going into Options when you see the Clover loader, use the right arrow to navigate Select ACPI patching-> Tables Dropping-> Go all the way down and deselect Drop all OEM SSDT Check all the Drop "SSDT-xx" below that Select Return Change DSDT name: BIOS.aml or anything other than DSDT.aml Select Return, Return Hit spacebar to select Verbose mode + debug 0x100 mode What the above does is to not use the patched DSDT/SSDT to determine if it's a DSDT/SSDT patching issue

Try adding AzulPatcher4600.kext to /EFI/Clover/kexts/Other. Features: Patches HDMI audio Applies the 9MB cursor patch with 2 ports only Disables the unused 0204 port (Fixes graphic lockups on some laptops) https://github.com/coderobe/AzulPatcher4600/releases

see post install https://osxlatitude.com/topic/8506-dell-latitude-inspiron-precision-vostro-xps-clover-guide/ Go with DW1510 if you don't care for Bluetooth.

Right, but only read that Hynix or a couple other needs that patch, not Samsung. You could try adding it to kexttopatch to see if it helps Name = IONVMeFamily Find = F6C1100F 85410100 00 Replace =F6C1010F 85410100 00 comment =Hynix NVMe patch 10.13.x (Bit swap block size 0x10) -Syscl

Use this version https://osxlatitude.com/applications/core/interface/file/attachment.php?id=15713 Make sure you don't have other versions anywhere else

Post the KP screenshot

You need the latest Lilu.kext (minimum v1.21)

Windows is in the same drive as the installed OS X drive? If not, then it could be an USB issue, not detecting the second USB drive where you installed OSX. Can you attach the Clover folder?

Post screenshot of Clover GUI after booting with the Installer

Yes, Optimus is not supported unless you could disable /enable it in the BIOS Your system is definitely supported, you had Sierra on it before so no reason why you can't run High Sierra. You should start with a vanilla USB installer rather than using a Distro.

No, I mean to select F12 or whatever to get to the Boot option. Select the USB installer, this will boot to the Clover GUI. From there choose the newly installed drive to continue installation.

site is currently down but you could check out the github https://voodooi2c.github.io/#GPIO Pinning/GPIO Pinning https://github.com/alexandred/VoodooI2C

It has not complete yet, probably need a second reboot. So boot with USB installer and then select the newly install drive to continue installation

that's part of the Installer loading into temp space

If you read it carefully, I believe he said files, not the DMG.

Build from a clean source, not from a Distro