Bronxteck

congratulations and enjoy

chameleon has issues with software raid setups. https://github.com/Conti/Chameleon/blob/master/doc/README

i used ahci setting not raid. bios a14. do you have a third drive to install too?

have you tried updating the bios to resolve the sleep issue? i think it's at a14 now. there where some sleep fixes along the way.

dart=0 flag is also supposed to disable VT-d if that helps.

Well have you checked to see if it is compatible with the os? maybe the manufacturer has an installer. it might need udated kexts. if not you might have to try load the kexts from your previous os that worked. Ok i took a look at http://us.focusrite.com/downloads?product=Saffire If that's your driver, your going to have to stay in snow leopard or lion, running in arch=i386 mode to use it. I looked at its binary file and it's not good news: SaffireControl are: ppc i386 ML does not support 32bit

chimera (chameleon, stolen and rebranded) no longer has support for nvram. which is what allows for the FaceTime and other fixes.

the problem was chimera (chameleon, stolen and rebranded).

i think you have to set disks02 active as it's the first hfs partition after efi.

idk but it is complaining about externalmediamounted i would check that out.

you can try this http://olarila.com/forum/viewtopic.php?f=6&t=63 they have a windows version same for dsdt. http://olarila.com/forum/viewtopic.php?f=19&t=62

so far it's pretty much the same install sequence as ML. if it rums ML then it should run mav. some kexts might have issues like trackpad it might need to be compiled with mavarick Xcode 5

yeah beta 8 does not have chameleon 2248 it has 2247 wich does not have 32 bit support for your boot. if your stuck boot with arch=x86_64 -v flag and once in the os install chameleon 2248 that should get you going.

install chameleon rev 2248 or higher.

you can try cloning it back over to the ssd.

it will not work with a install media that came packaged with a mac.

can you can post the specs and hardware please.

go to midi audio setup and set to 48000.0 hz

boot with the flags arch=x86_64 -v -f

i do not have that laptop model. but here is link about plist editing. http://www.insanelymac.com/forum/topic/267905-voodoohda-common-problems/

do you have AppleACPIPlatform.kext version 1.3.5 in your Extra folder?

have myhack use boot pack as extra it should have asked what extra to use when you made the installer. but if you already transferred the bootpack manually to the thumbdrive run a myfix on the installer volume. it looks like maybe there are 2 different fakesmc's but that would be the case if you used another extra first like myhacks generic extra option to build.

are you using a dsdt with graphics injection? if not look at the d630 gma. it has very similar specs.

are you sure you have a core2duo not a core solo cpu?

the dsdt we have in edp and the boot packs are based on the A09 bios. so an older bios can interfere with proper functionality.