Jump to content

Jake Lo

Moderators
 View Profile  See their activity

  • Posts

    14365

  • Joined

  • Last visited

  • Days Won

    868

 Content Type 

Everything posted by Jake Lo

  1. Jake Lo
    Good call Bronxteck. Was busy looking for DW1510 and didn't bother looking at the Intel. However there is a second slot for WWAN he could place the card...
  2. Jake Lo
    That would explain why it's not working. Check to see if the wireless switch on the side is set to 'On' Check the BIOS to see if it's enabled and detected. If all fails, check to see if it's seated properly.
  3. Jake Lo
    Download DPCIManager.app. You'll see it under PCI list tab
  4. Jake Lo
    Check the DEV/VEN ID, make sure it is DW1510 and not DW1520. Dell DW1510 Half Mini PCIe 14e4-432b BCM4322 A/B/G/N Y Y Y Y Y Y - Dell DW1520 Half Mini PCIe 14e4-4353 BCM43224 A/B/G/N N N Y Y Y N kext inj. + patch BCM4360 If you do end up having DW1520, just change you SMBIOS to MBA 5.1 or 5.2.
  5. Jake Lo
    Add this to KextToPatch to fix the USB on Wake issue <dict> <key>Comment</key> <string>Enable USB3 after wake for Intel 8 series chipset</string> <key>Find</key> <data> xoDIAAAAAQ== </data> <key>Name</key> <string>AppleUSBXHCI</string> <key>Replace</key> <data> xoDIAAAAAA== </data> </dict> To fix the CMD+Insert shutdown issue, go to the terminal and run the following sudo pmset -a hibernatemode 0 sudo pmset -a hibernatefile /Dev/Null To get system to sleep with LID close (I forgot to mention) you have to close the LID twice. First time you notice the LCD won't turn off, second time it's off and sleep initiates. I'm looking for a fix now. GPU lock up happened to me too but mouse will still moves, but have not recently. Some suggest restarting from Windows will eliminate this issue, but I don't have Windows running on it. See if this works for you too. I noticed you still have the FB patch in the config, is that needed still? Have you tested without it? I'll test the DP and see if I get the same result, but prefer to have HDMI working...
  6. Jake Lo
    Did you follow the troubleshooting guide for Boot0 error I linked above?
  7. Jake Lo
    Are you using Chameleon or Clover? Clover does not use /Extra folder. If Clover, copy all the kexts in /Extra/Extensions to EFI/Clover/Kexts/10.10 or Other.
  8. Jake Lo
    Undo what you did from that post and install this and this to /S/L/E.
  9. Jake Lo
    Upload your config. I'll compare with mine.
  10. Jake Lo
    Boot 0 error might due to 4k drive, see fix at end of this guide under troubleshooting. To boot with flag, you could either add it to Clover config or when you see the Clover boot, hit the space bar for selection.
  11. Jake Lo
    What error are you getting with Chameleon loader? Boot with -v -f
  12. Jake Lo
    Here. Check Hervé guide, include bootpack too.
  13. Jake Lo
    Try this What files do you have from you Chameleon build? I'm assuming you had Chameleon since you said you're moving to Clover. Any DSDT/SSDT? Kexts used? config.plist.zip
  14. Jake Lo
    Change User Access to Full Access in Security Section.
  15. Jake Lo
    Try this config.plist.zip
  16. Jake Lo
    Bootpack is now available including Clover here for 10.10. AppleIntelPIIXATA2 might be the file you need which is included.
  17. Jake Lo
    Try unchecking FixLan or whatever you might have checked.
  18. Jake Lo
    Does your model have just HD3000 or Optimus with nvs4200m? Add NullCPUPowerManagement.kext to /Extra/Extensions
  19. Jake Lo
    Please detail your steps to installing Clover
  20. Jake Lo
    Has it ever work before?
  21. Jake Lo
    fn+insert is to increase the brightness incase it's off. How about the power button? is it flashing? If it is, then it's still sleeping, a simple tab on the power button will wake it up.
  22. Jake Lo
    Is the HDD light still on and flashing? Try Fn+Insert (Pause)
  23. Jake Lo
    I believe that has an Alps Touchpad, same as mine. Only gestures I could get to work are side scrolling and 2 finger scrolling. There's no further development thus far since Sontrg's contribution. If you're a developer and know a thing about touchpad, you're welcome to try to further the development. See thread here that started it all for the Alps scrolling.
  24. Jake Lo
    There are 2 ways to do this, modify the config.plist with a text editor which I mentioned or use Clover Configuration. Either way, you need to mount the hidden EFI partition. To do it with CC, select mount, enter your password. Click on file to open/import -> point to the config.plist in EFI/Clover directory. Once file is loaded, on the left, click on Kernel and Kext Patches, then in the middle of the window, click on the + sign to add a new patch Enter info as highlighted below. When finish, click on file, save/export
  25. Jake Lo
    @hukare add this to KextToPatch <dict> <key>Comment</key> <string>9MB cursor bytes patch</string> <key>Find</key> <data> YAAAAABg2Q== </data> <key>Name</key> <string>AppleIntelFramebufferAzul</string> <key>Replace</key> <data> kAAAAABg2Q== </data> </dict> @kvasil See here by Hervé. If you have an O2Micro SD card reader, try that. You'll need to look through the reg to find where you reader is stored, use ioregistryexplorer v2.1
×
×
  • Create New...