Jake Lo

Here you go. nareto.zip

If it's the same as post #8, then try booting with -v -f -no-zp otherwise I need more info. Post the entire screen.

Try installing attach AppleHDA to /S/L/E, make a backup of the original if you like. For sleep, try enabling Asus AICPUPM in your config.plist. Remove BCM5722D, NullCPUPowerManagement, HDAEnabler, SleepEnabler and Patched_10.7_AppleRTC from Kexts/10.10 AppleHDA.kext.zip

Compress the 2 files, select More Reply Options. Choose files and attach

If you're using the USB ports in the back, make sure to use the 2 on top. Those are USB 2.0 ports.

On the front of the chassis, there are 4 USB ports. 2 on the left are USB 3.0 (SuperSpeed), the 2 on the right are USB 2.0.

just tested the bootpack with 10.10.3, no issue. Make sure to use the correct patched Kernel if you're installing 10.10.3. Can't use patched kernel from 10.10.2 or older. If you have an external video card, you'll need to remove that. In the BIOS, set all to default, apply and then set SATA Operations to AHCI. Also boot on the USB 2.0 port, not USB 3.0, you'll get a better chance of success.

Sounds like your graphics is not loading. Can you boot with the USB installer and select your HDD in normal mode?

You got a lot of stuff in the kexts folder but might not be needed. Please list your devices User DPCIManager.app. Get a screenshot of the PCI list.

Yes. Report any issue you encounter and we'll assist.

Ahh, good to include that info. Extra will not be use in Clover. Upload you Clover folder instead and any patched kext you have installed to /S/L/E

You need to install the patched AppleHDA to /S/L/E with kextwizard or kextutility, it won't load from /E/E If it's still won't work, please upload you /Extra folder

Remove AppleACPIPlatform, you should get sound. I see you have a patched AppleHDA already. Do you have a DSDT? If not, try this one here.

There's issue with hanging when BiOS is set to UEFI for the E7x50 and resort to legacy for now until there's further development. Here's my current config, DSDT, and SSDT you could try. Make sure to use latest Clover, I believe is 3193. Older version causes keyboard to repeat 8x for each character you enter. For the wireless, you'll need an NGFF M.2 card that's supported. BCM94352HMB will not fit in this model. E7x50_Clover.zip

I don't think the Nvidia is supported in OS X, so use the DSDT provided here. In the BIOS, set Sata Operations to AHCI and have Switchable Graphics enable. Boot the installer through the eSATA/USB combo port, you'll get a better chance of success.

As noted in the guide, your system has a Haswell CPU. Make sure to replace it in /system/library/kernels/kernel with the patched kernel.

There's an issue with your USB Installer. Rebuild it and try again. Or you could copy Essentials.pkg overwriting the file on the Installer

Send me our Config.plist and DSDT.aml, I'll patch it for you. Note: You could open your config.plist with plistEdit pro or textedit and paste the patch, no need for Clover Configurator.

Which version of Yosemite are you installing? What error are you receiving when you run with those boot flags?

See if this will work. Undo all the patches you had done for the BCM94352 and try this patch. Install attached kexts to /S/L/E BCM94352.zip

See here. Your config looks fine.

What files do you have in /Extra/Extensions? Do you have patched AppleHDA or voodoohda installed?

Here I made a dummy kext from Mirone's patched AppleHDA. Install both kexts to /S/L/E. Since you're using Clover, add this to your config.plist under KextToPatch and layout-id to 3 in your DSDT. You might have to patch DSDT to enable HDMI audio too if you don't have it already. ALC255.zip

Follow this guide for E6410, same specs.

See troubleshooting at the bottom here. I always use GUID unless system doesn't support it, then I'll use MbR.