Jake Lo

so you have full QE/CI now? I'm not seeing a question here.

What's your question? Does the new config work?

it's corrupted. Need to remove this if you are removing all the patches. KextsToPatch

add this to fakeID IntelGFX 0x04128086 and remove these Comment HD4400_Full_Qe/CI_ 2 Find hoASBA== Name AppleIntelHD5000Graphics Replace hoAWCg== Comment HD4400_Full_Qe/CI_ 1 Find hoASBA== Name AppleIntelFramebufferAzul Replace hoAWCg==

Try this http://www.touch-base.com

Try the eSATA/USB combo port

Look here for full packs. The D630 pack might work, but will need a little patch on the DSDT to show the correct Nvidia card.

Have you tried the 2 versions here? You'll need to patch DSDT to layout-id 03. You might need to restore ACPI kext to get sound to work. For Trim, you can add the patch to your Clover config.

Well said Hervé and Bronxteck

@jolly roger, queper also noted "I am a complete newbie building OSX on a Hardware System, I only had few virtual OSX's (10.6 & 10.9) running until now. I have used 10.6 to build the USB Stick. All BIOS Settings are set to back default, only UEFI is active. CPU XD Support is switched on." You need to set SATA Operation to AHCI too.

The bluetooth patch allows it to be turn on and off. Awesome, let me know how that goes, no need to re-install OS X. Might need patches to get it all to work though.

Do you mean HDMIAudio by Andrejkw? I thought it's only for Nvidia and AMD...

Can you boot with SafeMode or no cache mode?

If you have kexts in /EFI/Clover/Kexts/Other, make sure to delete all the other folders.

I'm assuming you're on Chameleon loader. Download Chameleon Wizard v4.4.1 Go to Modules tab and install Sata.dylib

I have not have issue with DSDT/SSDT issue after updating BIOS on my other models before, but won't know until we try. Maybe it might have a good outcome to fix the hanging issue Update: Updated BIOS to A04 Updated Clover to v3215 So far not issue found. Also got Bluetooth working with the Intel AC 7265 card. Go to IOBluetoothFamily->contents->Plugins->BroadcomBluetoothHostControllerUSBTransport->Contents->info.plist Edit Broadcom2045FamilyUSBBluetoothHCIController_D idProduct = 2602 idVendor =32903 Update2: I think I got Sleep with lid fix, I used Rehabman's ACPIPoller.kext and DSDT patch Finally tested the mini DisplayPort to DVI. No issue at all, with full resolution and no hang Tried patching FB for HDMI, still causes hang and auto reboot...more testing needed

Use the bootpack from your Mavericks system. You probably just need to install voodoohda/AppleHDADisabler to /S/L/E Update: Hervé has uploaded his bootpacks here.

Good call Bronxteck. Was busy looking for DW1510 and didn't bother looking at the Intel. However there is a second slot for WWAN he could place the card...

That would explain why it's not working. Check to see if the wireless switch on the side is set to 'On' Check the BIOS to see if it's enabled and detected. If all fails, check to see if it's seated properly.

Download DPCIManager.app. You'll see it under PCI list tab

Check the DEV/VEN ID, make sure it is DW1510 and not DW1520. Dell DW1510 Half Mini PCIe 14e4-432b BCM4322 A/B/G/N Y Y Y Y Y Y - Dell DW1520 Half Mini PCIe 14e4-4353 BCM43224 A/B/G/N N N Y Y Y N kext inj. + patch BCM4360 If you do end up having DW1520, just change you SMBIOS to MBA 5.1 or 5.2.

Add this to KextToPatch to fix the USB on Wake issue <dict> <key>Comment</key> <string>Enable USB3 after wake for Intel 8 series chipset</string> <key>Find</key> <data> xoDIAAAAAQ== </data> <key>Name</key> <string>AppleUSBXHCI</string> <key>Replace</key> <data> xoDIAAAAAA== </data> </dict> To fix the CMD+Insert shutdown issue, go to the terminal and run the following sudo pmset -a hibernatemode 0 sudo pmset -a hibernatefile /Dev/Null To get system to sleep with LID close (I forgot to mention) you have to close the LID twice. First time you notice the LCD won't turn off, second time it's off and sleep initiates. I'm looking for a fix now. GPU lock up happened to me too but mouse will still moves, but have not recently. Some suggest restarting from Windows will eliminate this issue, but I don't have Windows running on it. See if this works for you too. I noticed you still have the FB patch in the config, is that needed still? Have you tested without it? I'll test the DP and see if I get the same result, but prefer to have HDMI working...

Did you follow the troubleshooting guide for Boot0 error I linked above?

Are you using Chameleon or Clover? Clover does not use /Extra folder. If Clover, copy all the kexts in /Extra/Extensions to EFI/Clover/Kexts/10.10 or Other.

Undo what you did from that post and install this and this to /S/L/E.