Jump to content

Bronxteck

Administrators
 View Profile  See their activity

  • Posts

    5778

  • Joined

  • Last visited

  • Days Won

    124

 Content Type 

Everything posted by Bronxteck

  1. Bronxteck
    try booting with the Flag GraphicsEnabler=yes if still nothing try the no value instead.
  2. Bronxteck
    yup intel is not compatible
  3. Bronxteck
    http://www.nextofwindows.com/how-to-make-uefi-bootable-usb-flash-drive-to-install-windows-8/ http://www.eightforums.com/tutorials/2328-uefi-unified-extensible-firmware-interface-install-windows-8-a.html just use google. your bios has to be in UEFI mode.
  4. Bronxteck
    it's the prefpane that is included with clover installer to set clover options like efi mounting/ theames and clover updater
  5. Bronxteck
    look in bios it might tell you what wifi card is installed. if not run lspci -nn in terminal in osx and post results. assuming you used myhack.
  6. Bronxteck
    you need to choose uefi install media from the hdd selection menu when you pres f12 at bios prompt. loading an iso directly will not work. you need to have a proper usb or dvd windows installer.
  7. Bronxteck
    install cloverprefpane from the installer and select efi mount options there. although it might not work proper in yosemite yet.
  8. Bronxteck

    e6520 help

    Bronxteck replied to TMNTony's topic in The Archive

    it can be a fakeSMC kext issue. remove the lpc.kext plugin and rebuild your caches. if not replace fakesmc kext and it's plugins.
  9. Bronxteck
    check your bios options and the wifi switch. unless it has an unsupported wifi card.
  10. Bronxteck
    did you try editing the kext like described here http://www.insanelymac.com/forum/topic/294550-mac-os-109-maverick-and-network-problem-marvell-88e8056/
  11. Bronxteck
    yeah use the one that gets the least errors
  12. Bronxteck
    look in your bios and confirm what video card it has. then you need to adjust clover's config plist accordingly. use the clover wiki for instructions http://clover-wiki.zetam.org/home for the config plist. clover configurator app is also helpful for adjusting settings.
  13. Bronxteck
    do not use reboot. shutdown the machine. then boot into your choice of os. if you reboot sometimes the usb gets stuck without a full power down.
  14. Bronxteck
    you can try darwindumper app or if using clover i think you press F4 and it dumps it into acpi folder.
  15. Bronxteck
    most likely your graphics is not loading correctly.
  16. Bronxteck
    you can download the prebuildt binary from http://sourceforge.net/projects/cloverefiboot (chameleon, stolen and rebranded)/files/
  17. Bronxteck
    have you had that particular usb disk boot chameleon before? not all of them do. also do not forget the extra folder and files/ kexts
  18. Bronxteck
    that last one seemes like a fake smc plugin issue could be the lpc kext. remove the plugins.
  19. Bronxteck
    there are a few topics turning up here using the search feature on the top right of the site. maybe that can give you an idea of what it involves.
  20. Bronxteck
    try booting from a usb with your bootloader and config files incase osx is having issues reading your config files from raid. hopefull that can get you going till you sort out your issues.
  21. Bronxteck
    well what supplies your BT? you might have removed it with the intel wifi if it was a combo card. look in system info under usb and check your devices.
  22. Bronxteck
    it sounds like you need to tape over i think its pin 20 on the wifi card. you can google tape pin 20 for wifi card under images for a picture.
  23. Bronxteck
    single user mode. -s first you have to mount the drive as it states in the terminal command prompt sbin/mount -uw / then touch /S*/L*/Extensions kextcache -Boot -U / in single user mode you should not have to call sudo.
  24. Bronxteck
    you do not have a dsdt in your ACPI/patched folder.change the name DSDT.aml to Bios.aml in the config. as the dsdt name. or if you have a dsdt put it in the acpi/ patched folder and leave the name DSDT.aml alone
  25. Bronxteck
    in clover configurator import your clover.config, go to gui section and click on dual link change it to 1 then save the changes by exporting the config.
×
×
  • Create New...