Bronxteck

OC is not like clover if you put kexts in OC/Kext folder you also have to tell OC that you put it in there by using the config plist. maybe that is why you are having issues.

double check your bios settings. you might have to turn on ahci again or might have to reset your bios to defaults and re adjust your settings. like DVMT if that was needed.

the solution is you have to update your config file to correspond with the version of bootloader you are using. some features where removed and or added / replaced from the version of bootloader you are using and the config you are using.

what exactly are you asking?

you can try this. it has a fan read ssdt. but i do not know if it gives control to the os https://github.com/scarymen1325/opencore_hp_810_g2

looks like hibernate mode is set to 3. see if setting it to 0 helps

try using only the boot flag alcid= and add the id you are testing to it like alcid=12 remove any alcid's you have in ssdt's or property injections in config. with OC you will need working nvram if not it will not update your alc id as you test different ones. you will have to manually delete the variable from nvram and enter a new nvram value.

OC will break your installed windows activation as OC will tell the os that is is a mac and not your activated machine

sometimes you have to call apple support to remove you from the spammer blacklist. if you connect with too many different machines as you are by changing values constantly you automatically get black listed by apples servers

make sure you have applealc declared in your OC config and that the kexts are in the correct patch order for loading

if that does not work you might have to set DVMT in shell. you would have to find the values for your system bios.

OC and it's patches affect all OS's system wide as opposed to clover only patching for MacOS. and OC was designed that way from it's inception. so most likely windows and all operating systems will always be affected by directly booting OC. if possible boot windows from the bios boot selection menu.

then you need to figure out whats amiss with your BT kexts or usb bus if it does not show. but thats only if your BT is compatible with osx.

have you tried any of the other layout id's that hackintool suggests in the drop down box with the blue arrow in your pic? another one might work better.

i had similar installer issues with formatting the volume apfs in Mojave. what resolved it for me was formatting it HFS GUID and letting the installer do the APFS conversion.

make sure to select the installer when it reboots. your nvram might not be fully working so it defaults to booting catalina

follow the dortania guide https://dortania.github.io/OpenCore-Install-Guide/ it walks you through the config.

if you are using latest clover it is now merged with opencore so apfsdriverloader driver would not work you have to configure apfs support in the config plist you can try https://github.com/CloverHackyColor/CloverBootloader/releases/tag/5119

update your smbios with a machine that supports catalina.

use alcid=15 boot flag or edit it in nvram with hackintool app

you can try this https://dortania.github.io/OpenCore-Install-Guide/troubleshooting/extended/userspace-issues.html#stuck-on-your-mac-needs-a-firmware-update-in-order-to-install-to-this-volume

you can use hackintool to change your nvram settings. you can change the variable alcid=1 to alcid=11

hacks do not get very good battery life. 3 hours is kinda good actually.

depends on the boot loader you use. it would go where ever you would put lets say -v for verbose. https://github.com/acidanthera/AppleALC/wiki/Installation-and-usage

if you have windows then you can try using this https://www.insanelymac.com/forum/topic/283190-bootdisk-utility/