Bronxteck

you might have to use the flag alcid=11 i had to use the flag for my 7060 micro. for some reason the normal methods did not work. voodoohda did work though.

darkwake=0 used to correct issues like that. but check in power saving prefpane and uncheck the network power nap feature .

did it help with the sleep issue

you most likely need more ram.

make sure you set your internal usb devices as internal. you can create a usb kext with hackintool. USB Device: DW5811e Snapdragon™ X7 LTE USB Device: BCM20702A0 USB Device: 5880 (if it is an internal usb device) USB Device: Integrated_Webcam_HD

clover 5120 has kext injection issues.

try adding the boot flag alcid=11

CLOVER does not affect both Mac and Windows OS in that manner. but OC can. especially if you have improper setting or SSDT'S for power management

you can retry using the flag alcid= and one of those layout id's

maybe he has to tape a pin to allow it to work herve.

it uses HWMonitor app https://github.com/CloverHackyColor/HWMonitorSMC2

maybe something like this might help https://www.insanelymac.com/forum/topic/339830-dell-monitoring-by-smm-and-fan-control/

if you are using opencore you might want to reset your nvram.

what exactly is a dark screen mean? like nothing or there is something displaying but the back light is not on or its very dim? if that is the case of it being back light then you probably need to get your nvram working properly.

did you check in system preferences / general tab to see if handoff is selected? it is located towards the bottom under recent items box

new fork of DrHurts code. https://github.com/1Revenger1/VoodooPS2-Alps VoodooPS2Controller.kext.zip

latest update to DrHurts release-6 code (as of the date of posting this) is available here https://github.com/1Revenger1/VoodooPS2-Alps VoodooPS2Controller.kext.zip

try enable CSM in bios.

i did not notice if you mentioned what the card actually is like make and model other then maybe a chipset maker. have you tried going to it's manufacturer webpage to see if they even mention OSX compatibility or drivers? if it is not compatible its not compatible.

try adding the pci device path to your clover or OC config. you can use Hackintool to export your device paths

you can unenroll by changing the last part to /seedutil unenroll DeveloperSeed that will stop the updates from showing

latest opencore is at 0.5.9 you also might want to run your config through the OC sanitizer

BCM94360NG runs native so remove all hack wifi patches / SSDT/ boot args and kext same for BT all it needs is to be seen on the usb bus

Intel wifi not supported in OS X

XCPM might have been corrected in clover as of rev 5117 needs testing