Bronxteck

DW5810e is a M.2 Mobile Broadband 4G LTE WWAN Card

i did not say your BIOS. i said SMBIOS like the mac your are using to spoof and make osx run? the one specified in your config.

update your smbios firmware version as it is outdated. that is why it is asking for the update.

you probably need to check your kext load order in your OC config.plist you also might have to add any kexts inside your VoodooPS2.kext

speed difference would be the theoretical bandwidth differences between sata and nvme.... sata 3 supposedly can handle 600mbs where as NVME can go as high as 3500mbs so the difference between them is about 7X fold.

your speed differences has nothing to do with trim. it has to do with the drive architecture's. NVME has much more bandwidth available to it then what sata3 is capable of.

https://opencore.slowgeek.com/?file=laptopkabylake062QONBHJ&rs=laptopkabylake062 those are the changes that need to be made to the 6.0 config plist to upgrade OC 0.6.2

the dortania guide to OC explains it for you https://dortania.github.io/OpenCore-Post-Install/cosmetic/gui.html#setting-up-opencore-s-gui

if it is a pm981 you can try adding this kext https://github.com/acidanthera/NVMeFix follow the instructions there.

you can just go here https://github.com/osy86/ThunderboltReset/find/master and find the file you want then right click and save as. it should just download as the file. in this case as an .AML then just open that up in mac iasl. acidanthera has updated the app. maybe it is the one you are using https://github.com/acidanthera/MaciASL/releases

network - https://github.com/Mieze/RTL8111_driver_for_OS_X/releases audio - https://github.com/acidanthera/AppleALC/releases how to use Applealc - https://github.com/acidanthera/AppleALC/wiki/Installation-and-usage try the layout id's for ALC887 suggested there - https://github.com/acidanthera/AppleALC/wiki/Supported-codecs

you probably need to update your config quirks

it sure does open .asl files natively... at least every version i have used since it was first developed by phpdev32

why are you pasting code from one to the other? maciasl will open a dsl or aml natively. it will also save as either natively. no need to make a new file as one format to convert to the other.

suka is yours a mini also like Gemini's because if not then the usb ports need to get re mapped with hackintool

usually maciasl has a drop option for the file extensions when you save as it says something like assembled or disassembled file type

you should only have to set internal devices to internal like BT camera hubs stuff like that.

did you update all the kexts as well?

https://github.com/osy86/ThunderboltReset also read the 2 guides at the link. maybe you can come up with a solution for your hardware.

you can try this https://github.com/dragonflylee/Yoga-730-hackintosh

Try selecting FixPNLF in clover config

here is a good start for your project. https://dortania.github.io/OpenCore-Install-Guide/extras/big-sur/#backstory

you might have to just put clover back as the default bootloader path in bios.

what kext are you using to control backlight maybe it need updating if its from acidanthera virtual smc plugin

if you have internal webcam and or BT make sure those usb devices are set to internal. the internal usb hubs should also probably be set.