Bronxteck

laptop haswell's and safari do not get along too well. you can try adding this to clover config kexts to patch Name: AppleIntelFramebufferAzul Find: 48898BA8000000 Replace: 90909090909090 Comment: isolate IntelAccelerator HD4600 (10.11.6 & 10.12.X) MatchOS: 10.11.6, 10.12.x

in windows 10 you can hold the shift button while selecting restart that should get you to recovery. in recovery you go to advanced then select startup after that reboot then you can select safe mode like F8 used to do.

I think Sierra has issues with some logitec keyboards and mice if so be the case.

if you need to access EFI you can boot windows in "safe mode" and in an admin command prompt type in mountvol x: /s start x: it should open your EFI

you can try booting without cache.

make sure you don't have different trackpad kexts in different locations they will conflict also it might be in your cache.

are the keyboard and mouse ps2 or usb? if usb unplug it and replug them when that happens if ps2 you might need a ps2 kext added to your kexts

you can try this one as well https://osxlatitude.com/index.php?/topic/1948-elan-focaltech-and-synaptics-smart-touchpad-driver-mac-os-x/

looks like Jake has edited a DSDT for an RV50 here #228 it needs to be compiled with a DSDT editor into a DSDT.aml extension.

hmm I've never seen that EDID error. where is it getting the EDID from? is it in dsdt or config plist?

do you have both ram slots populated or just one? if just one switch its location.

make sure you set sata to AHCI in bios and that you have HFSplus.efi in efi/clover/drivers whichever one the system is using usually drivers64 or drivers64uefi. hopefully that will resolve the not detecting drive issues. but I think that model has issues booting in UEFI mode. what system bios rev are you at?

you can try the Elan/synaptics trackpad from our forum. https://osxlatitude.com/index.php?/topic/1948-elan-focaltech-and-synaptics-smart-touchpad-driver-mac-os-x/

looks like your using "beast ware" try using original clover from its source here https://sourceforge.net/projects/cloverefiboot (chameleon, stolen and rebranded)/files/Installer/

make sure you have HFSPlus.efi in your efi/clover drivers folder remove vboxhfs if its there and replace it with hfsplus.efi also check you bios's sata mode use AHCI if possible. HFSPlus.efi.zip

it is known to happen on mobile haswell gpu.

Enjoy.

i guess you replace your dsdt with it where ever that is located if in clover then clover/acpi/patched makesure you save it as DSDT.AML not DSDT.DSL extention

change the first 0x0C to 0x00

ssd definitely helps but it might not connect at full speed of the ssd's out now a days.

did you give it a name the field is blank in the picture.

no the efi update has to do with your smbios. your smbios "bios version" needs updating

Like Jake mentions DW1510 Does not have integrated BT but some laptops already have one integrated so you might not actually need the BT part. thats the case on my HP. I am not using the DW1550 BT module.

you might have to use trackpad prefpane from 10.11.6 os

there used to be a way you would extract something from the windows bootcamp installer and install it on the windows os but I don't remember the procedure. it would allow read only access to the OS X files from within windows.