Jump to content

Bronxteck

Administrators
 View Profile  See their activity

  • Posts

    5778

  • Joined

  • Last visited

  • Days Won

    124

 Content Type 

Everything posted by Bronxteck

  1. Bronxteck

    ASUS G73JW

    Bronxteck replied to MXPYNE's topic in The Archive

    if you can not boot with out the usb then you have not installed a bootloader to your hard drive.
  2. Bronxteck
    can the voodoosynapics prefpane be modified to work with the alps functions? if you compile it on Sierra Xcode it will open and function. thats how I got it to work for synaptics on my machine. I'm not sure if the settings last after reboot though.
  3. Bronxteck
    well you can always just get a cd rom- hdd caddy adapter
  4. Bronxteck
    if it does not save the files then it could be the EFI is not formatted as fat32
  5. Bronxteck

    windows 10

    Bronxteck replied to nasa11's topic in The Archive

    http://www.thewindowsclub.com/convert-mbr-to-gpt-diskyou should be able to open a command prompt in windows installer When you see Windows Setup, press the Shift + F10 keys
  6. Bronxteck
    if your cpu does not have SSE4 support you cannot use sierra.
  7. Bronxteck
    oh sorry. XhciDxe-64.efi is for usb3 I believe. you did not specify it was your machine in your sig. you can try different USB ports when booting the external.
  8. Bronxteck
    yeah i dont think you should be having so many issues lol. i wonder how old the ps2 kext is you are using. some where causing issues on 10.11.3 and up. if you have a usb mouse and keyboard try with out the ps2 kexts.
  9. Bronxteck
    clover r799 is way too old for sierra. look over the config file and see if there are any graphics glitch patches in kext to patch section. disable them or remove them.
  10. Bronxteck
    try switching usb ports or reinserting the usb when you get to that error.
  11. Bronxteck
    you can try adding XhciDxe-64.efi driver to clover from the clover installer or clover configurator app
  12. Bronxteck
    ivy bridge needs asusintelcpupm and kernel pm kernel patches if mchc is an issue you can try dropping it from the ssdt table dropping menu.
  13. Bronxteck
    clover will fill the origin folder if you press F4 at the clover selection menu
  14. Bronxteck
    looks like the shortcuts will be corrected in sierra update 10.12.1
  15. Bronxteck
    you probably need to add this patch in clover kexts to patch courtesy of darkvoid it is pretty much mandatory for sierra and brcm4360 based cards like DW1550/DW1560 Kext: AirPortBrcm4360 Find: 81F952AA00007529 Replace: 81F952AA00006690 Comment: initialize the fvco (frequency voltage controlled oscillator) boot without caches after adding patch.
  16. Bronxteck
    you probably need to use RTC fix in clover if that is what your using. or fix rtc acpi patch
  17. Bronxteck
    sounds like the same issues we had with the D430 it shared IRQ's with other devices. devices would disappear.
  18. Bronxteck
    I don't think its called mach_kernel anymore. just kernel. remove mach_
  19. Bronxteck
    yes and yes also follow Herve's suggestions above. the only difference is that you must make sure your smbios is compatible with 10.11. it should be most likely.
  20. Bronxteck
    what wifi card are you using some cards need new patches for 10.12
  21. Bronxteck
    it shows up in your DSDT under device pcie Device (CRD0) { Name (_ADR, 0x00010000) // _ADR: Address Method (_INI, 0, NotSerialized) // _INI: Initialize { SMI (0x95, 0x04) } Name (_S1D, Zero) // _S1D: S1 Device State Name (_S3D, 0x03) // _S3D: S3 Device State } weird though it's missing Name (_CID, EisaId ("PNP0D40")) // _CID: Compatible ID I guess the bios is super old. you can try adding it in like this on top Device (CRD0) { Name (_CID, EisaId ("PNP0D40")) // _CID: Compatible ID Name (_ADR, 0x00010000) // _ADR: Address Method (_INI, 0, NotSerialized) // _INI: Initialize { SMI (0x95, 0x04) } Name (_S1D, Zero) // _S1D: S1 Device State Name (_S3D, 0x03) // _S3D: S3 Device State }
  22. Bronxteck
    the caps lock issue happens on real Macs as well so it is not an issue with the kext.
  23. Bronxteck
    you have to transfer the working EFI folder to the HDD. make sure to save the old one or rename the folder to like EFIX just incase those are the files that clover is using. once all is fine you can remove the backup.
  24. Bronxteck
    that makes sense then optiofix2 is working since it rebooted instead of getting stuck at optio verbose message. it probably was missing a config value for kernel pm.
  25. Bronxteck
    what slot is your ram in? its the last thing i can think of. if you only have 1 memory card, swap it to the other location. also you might have to swap back the optiofix driver.
×
×
  • Create New...