Jump to content
New membership by application only, through the "Contact Us" facility

Jake Lo

Moderators
 View Profile  See their activity

  • Posts

    14365

  • Joined

  • Last visited

  • Days Won

    871

 Content Type 

Everything posted by Jake Lo

  1. Jake Lo
    redo this until error is gone sudo touch -f /L*/E* sudo kextcache -Boot -U /
  2. Jake Lo
    What options to select when installing Clover to HDD? Better to attach the files here using the More Reply Options on the lower right so don't have to go to external links.
  3. Jake Lo
    Replace DSDT/SSDT and Config file post IOReg with HDMI display connected 5480_Disabled930MX.zip
  4. Jake Lo
    enable Legacy Option ROMs in the BIOS, will fix the boot garble screen
  5. Jake Lo
    @lilo9546 what hardware is this for? There's a few patched kexts for ALC298 already https://github.com/vit9696/AppleALC/releases
  6. Jake Lo
    See here for E6230 under IvyBridge Sierra.
  7. Jake Lo
    At the Clover screen, hit the spacebar. Select verbose & debug 0x100. Boot from the 3rd icon, not the Preboot. Should take another 30+ min to complete After install Clover to the drive and add bootpack and complete the post install Post KP if exist
  8. Jake Lo
    No file attached Also list the following: BIOS version Ethernet Wifi Touchpad
  9. Jake Lo
    You're missing HFSPlus.efi. Replace the EFI folder contents with this
  10. Jake Lo
    Try setting BIOS to load defaults, apply it. Then go back and set to UEFI AHCI Legacy Option ROMs enabled CPU XD support Enabled TPM disabled Secure Boot Disabled then try again. If still failed, attach the Clover folder for review
  11. Jake Lo
    Does the system have dual GPU? Did you use the correct bootpack? Try using the eSATA/USB combo port to boot No need to disable USB 3.0
  12. Jake Lo
    Note: Bootpack (EFI) consists of combining the Generic EFI + the model you're downloading!!! Instruction: Download the Generic EFI folder. Download model below and add the contents into the Generic /EFI/Clover folder Either use the generic EFI from guide or download HFSPlus.efi and place in /EFI/Clover/driver64UEFI
  13. Jake Lo
    Try this for bluetooth #1
  14. Jake Lo
    The external display is connected through the Nvidia, so if it's disabled, you'll only have Internal display. Yes, eDP is what's causing the dark internal display from working, no fix that I know of.
  15. Jake Lo
    Any issue with the graphics glitches with Legacy ROMS off like during the installation in post #45?
  16. Jake Lo
    What do you mean brightness off? It's not working? See here under post install regarding Karabiner-Elements.app to reset the Fn keys
  17. Jake Lo
    Try enabling Legacy Option ROMs in the BIOS and try again. If you could get this far, then the files are fine. The Origin folder you attached is incomplete, missing all the SSDT-xx.aml, but might not need now since you're able to get to the installer
  18. Jake Lo
    Sometimes you'll just need to place system to sleep and then wake it backup.
  19. Jake Lo
    post your clover folder. Not sure why it works for Moah1111 with the same files and not you unless he did something different or you have slightly different hardware. in that case, at Clover GUI, hit F4. The compress and attach /EFI/Clover/ACPI/Origin folder here. Will need to be patched
  20. Jake Lo
    Boot to Clover Gui, hit space bar. Select these verbose (-v) Don't reboot on panic (debug=0x100)
  21. Jake Lo
    I don't see an error. Did it just hang there??? Try resetting BIOS to Default, apply and then go back and set to AHCI UEFI secure boot disabled TPM disabled
  22. Jake Lo
    Try this Config
  23. Jake Lo
    Try this Config config.plist.zip
  24. Jake Lo
    That's an Intel and are not supported. You'll need to replace it with either DW1560 or DW1830 or something similar
  25. Jake Lo
    See FAQ regarding Hibernation I'm not seeing any Bluetooth in the USB section, are you sure this card has bluetooth combo? Add this Config to /EFI/Clover. During Clover boot, go to options->Config and select to boot from this Config file. If it works for the Wifi, then you could rename it to Config.plist replacing the old config-AR9565.plist.zip
×
×
  • Create New...