Jump to content

Bronxteck

Administrators
  • Posts

    5778
  • Joined

  • Last visited

  • Days Won

    124

Everything posted by Bronxteck

  1. you need to add nullcpu.kext to your installer you probably will also need patched AICPUPM kext and kernel depending on your boot loader.
  2. make sure you put the patched dsdt/ssdt files in clover/acpi/patched folder, also make sure that your clover config file has the name of your dsdt present. i believe default clover entry is DSDT.aml.
  3. on reboot you have to choose the installer volume at clover os choice menu that was generated after you ran the installer
  4. did you add your kexts into your efi clover kexts 10.11 folder? also clover configurator version 4.24.0 has provisions for the CSR values under RT config
  5. the downloaded app might be corrupted.
  6. i do not recall if you are using nullcpu.kext that would break sleep. also did you try the sudo pmset hibernatemode 0 command. also remove the sleep image. it shows the path to it if you do a pmset -g then just sudo rm -rf /path showed by pmset -g
  7. follow post 11 to get a copy of your acpi tables. ssdt will be part of them.
  8. https://support.apple.com/en-us/HT201372apple has a guid to help.
  9. oh wait if your using clover, fakesmc uses clovers built in values. if you do not wish to use those values you have to remove the clover section in fakesmc plist <key>Clover</key><dict> <key>BEMB</key> <array> <string>BEMB</string> <string>flag</string> </array> <key>EPCI</key> <array> <string>EPCI</string> <string>ui32</string> </array> <key>RBr</key> <array> <string>RBr</string> <string>ch8*</string> </array> <key>REV</key> <array> <string>REV</string> <string>{rev</string> </array> <key>RPlt</key> <array> <string>RPlt</string> <string>ch8*</string> </array> </dict>
  10. yup should be able to just swap the hdd and make sure the sata is set to ahci in bios.
  11. can you please keep the topic on trackpad?
  12. it seems they have made progress with newer versions on chameleon in regard to recovery partition http://www.insanelymac.com/forum/topic/231075-chameleon-23svn-official-pkg-installer-binaries/page-175
  13. dart=0 seems to show twice in your boot flags also are you using nullcpu kext or did you already generate your p and c states?
  14. i know it might sound like a regress but can you test with smbios of MacBookPro 3,1 just to see if usb works.
  15. hit the letter o button at clover prompt and check if it has the -f flag if so hit enter and remove it then hit enter again then ESC key and try again.
  16. see if it will boot off the usb bootloader then try select your new install. you might have to install a boot loader to the HDD and also transfer your extra folder to the new install. after run a myfix -q -t / in terminal
  17. do you have an idea who makes the trackpad for your model? same for the wifi.
  18. pokenguyen has one at http://www.insanelymac.com/forum/topic/298027-guide-aio-guides-for-hackintosh/page-1
  19. you can try adding NullCPUPowerManagement.kext or using clover asus aicpupm patch
  20. well you can use nullcpupowermanagement.kext for the installer
  21. you have to modify the AppleIntelCPUpowerManegment kext's binary file or run a pearl script to modify it. i do not recall what it is for 10.10.5
  22. is that the original card to your laptop? some laptops do not have the usb pins needed on the pci-e slot for BT to function and some need a pin taped to work because it sends a signal to turn off the BT if connected in a normal manner.
×
×
  • Create New...